Table of Contents
Advertisement
EBU33942
Cleaning the spark arrester
Be sure the exhaust pipe and muffler are cool be-
fore cleaning the spark arrester.
1. Remove the tailpipe bolt and nut.
1. Spark arrester
2. Tailpipe bolt
9
3. Nut
2. Remove the spark arrester by pulling it out of
the muffler.
3. Tap the spark arrester lightly, and then use a
wire brush to remove any carbon deposits.
4. Insert the spark arrester into the muffler and
align the bolt hole.
2
1
3
5. Install the tailpipe bolt and nut, and then tight-
en the nut to the specified torque.
Tightening torque:
Tailpipe nut:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
EWB02342
WARNING
Always let the exhaust system cool prior to
touching exhaust components.
Do not start the engine with the spark arrester
removed. Sparks or exhaust particulate can
cause eye injury, burns, or start a fire.
EBU40690
Checking the idle speed control (ISC)
hose
The ISC hose should be checked at the intervals
specified in the periodic maintenance and lubrica-
tion chart.
9-19
- Quick Links:
- Speed Limiter
- Engine Oil
- Engine Oil
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
