Advertisement
Available languages
Available languages
| Kevorsttiolewr-}a(e ms af0is(ortiola mee) mm @relel ice) is
[is] SUB-WOOFER INPUT selector
When you connect the head unit with the
sub-woofer output connector, set the
selector to ON. The input signal from the
SUB-WOOFER input connector flows out to
the SUB-WOOFER output connector. When
you use the unit which has no sub-woofer
output connector (when your unit is
connected to only FRONT and REAR input
connectors of the XEC-1000), set the
selector to OFF. In this case, the
summation of the front and rear input
signals is output from the SUB-WOOFER
output connector.
[13] FRONT INPUT selector
When you set this selector to ON, the Input
signal from the FRONT input connectors
flows out to the FRONT output connectors.
When you set it to the OFF position, the
FRONT output signa! is to be the REAR
input signal. if your head unit has only one
pre-amplifier output, set the selector to the
OFF position.
This unit's flexibility is derived from these two
input selectors, for combination of these
selectors allows you to construct various
types of systems, regardiess of the number of
When you do not use
SUB-WOOFER. INPUT or FRONT INPUT
Be sure to set the SUB-WOOFER INPUT selector or the FRONT INPUT selector to
OFF. Otherwise, the unit may not function weil.
Advertisement
