Advertisement
Quick Links
Operating
Instructions
STEREO DOUBLE CASSETTE DECK RECEIVER
RAHZIS7 IR XAZ55
RX-Z45
STEREO TURNTABLE
Pie Z85
SPEAKER SYSTEM
er es) B.
Thank you for buying this PIONEER product.
Please read through these operating instructions so you will know how
to operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
in some countries or regions, the shape of the power plug and power
outlet may
sometimes
differ from that shown
in the explanatory
drawings. However, the method of connecting and operating the unit
is the same.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel. Please
write this serial number on your enclosed warranty card and keep it in
a secure area. This is for your security.
WARNING: To PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
* The RX-Z35, RX-Z45, PL-Z85 and S-Z35D are not sold in the U.S.A.
and Canada.
i
The RX-Z15 and RX-Z35 are not sold in Europe.
LINE VOLTAGE SELECTOR SWITCH
Only multi voltage models are provided with this switch. U.S.,
Canadian, European, U.K., and Australian models are not provided
with this Switch.
Mains voltages in Saudi Arabia are 127 V and 220 V only. Never use
this mode! with 110 V setting in Saudi Arabia.
Before your model is shipped from the factory, this switch is set to the
power requirements of the destination; nevertheless, you should check
that it is set properly before plugging the power cord into the AC outlet.
VOLTAGE SELECTOR
1. Disconnect the power cord.
2. Use a medium-size screwdriver.
3. Insert the screwdriver
into the
groove on the voltage selector and
adjust so that the voltage value of
your area:
FM/AM CHANNEL STEP SWITCH
Adjustment is only necessary when there is a CHANNEL STEP.
Switch atthe rear panel.
~
The CHANNEL STEP switch is located on the rear panel of the digital
synthesizer tuner. Before the tuner leaves the factory, this switch
is set to the channel step standard of the area where the tuner is
sold. Depending on the position of this switch, each time TUNING
button is pressed, the frequency display changes by the following
amount:
[100 kHz/10 kHz] position
For areas with channel step of 100 kHz for FM and 10 kHz for AM.
150 kHz/9 kHz] position
Sree
D e
hee
For areas with channel step of 50 kHz for FM and 9 kHz for AM.
NOTE:
#f the switch is set to the wrong position, correct tuning may not
be possible.
Consult your dealer if you are not sure about the radio channel
step standard in your area.
@ PIONEER'
The Art of Entertainment
Advertisement
