CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Pre-Maintenance
Procedures
Maintenance and Storage
Safety
•
Before repairing the machine do the following:
– Disengage the drives.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Disconnect the spark-plug wire.
•
Park the machine on a level surface.
•
Clean grass and debris from the cutting unit,
drives, mufflers, and engine to help prevent fires.
•
Clean up oil or fuel spills.
•
Let the engine cool before storing the machine.
•
Do not store the machine or fuel near flames or
drain the fuel indoors.
•
Do not allow untrained personnel to service the
machine.
•
Use jack stands to support the machine and/or
components when required.
•
Carefully release pressure from components with
stored energy.
•
Disconnect the battery or remove the spark-plug
wire before making any repairs. Disconnect the
negative terminal first and the positive terminal
last. Connect the positive terminal first and
negative last.
•
Use care when checking the blades. Wrap the
blade(s) or wear thickly padded gloves, and use
caution when servicing them. Only replace blades;
do not straighten or weld them.
•
Keep your hands and feet away from moving
parts. If possible, do not make adjustments with
the engine running.
•
Keep all parts in good working condition
and all hardware tightened, especially the
blade-attachment bolts. Replace all worn or
damaged decals.
•
Never interfere with the intended function of a
safety device or reduce the protection provided
by a safety device. Check their proper operation
regularly.
•
To ensure optimum performance and continued
safety certification of the machine, use only
genuine Toro replacement parts and accessories.
Replacement parts and accessories made by
other manufacturers could be dangerous, and
such use could void the product warranty.
•
Check the parking brake operation frequently.
Adjust and service as required.
34