Related Manuals for Siemens WM14W690EE
Summary of Contents for Siemens WM14W690EE
- Page 1 Washing machine WM14W690EE, WM14W69XEE siemens-home.com/welcome Register your product online ens-home.com/welcome...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n W a s h i n g m a c h i n e I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Appliance settings ..33 Positioning and connecting . . 45 Activating the setting mode ..33 Included with the appliance ..45 Changing the signal volume .
-
Page 5: Intended Use
Intended use Intended use For private domestic use only. ■ I n t e n d e d u s e The washing machine is suitable for ■ washing machine-washable fabrics and hand-washable wool in water containing detergent. To be operated with cold mains ■... -
Page 6: Safety Instructions
Safety instructions If you lean on the washing Safety instructions ■ machine door when it is open, the washing machine Electrical safety may tip over and cause S a f e t y i n s t r u c t i o n s injuries. -
Page 7: Safety For Children
Safety instructions Safety for children Warning Risk of poisoning! Warning Detergents and care products Danger of death! may be poisonous if If children play with the washing consumed. machine, they may get into life- Keep detergents and care threatening situations or injure products out of the reach of themselves. -
Page 8: Environmental Protection
Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 12 The displays provide information protection about the relative level of energy and water consumption in the selected Packaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more indicator lights light up, Dispose of packaging in an the higher the programme's... -
Page 9: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button. -
Page 10: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 26 Operating/display panel Door with door handle 9S Open the door... -
Page 11: Control Panel
Getting to know the appliance Control panel All the buttons are sensitive P Childlock (w 3s.) Note: (except for the main switch) and only to prevent the set functions from need to be pressed lightly. being changed accidentally: Press and hold the Ready in (terminado en/em) + and - button ( Main switch for switching the washing machine... -
Page 12: Display Panel
Getting to know the appliance Display panel Ready in time ■ e.g. 2:30; Programme duration depends on the programme selection in h:min (hours:minutes), Preselection of end time ■ 1 - 24 h; Programme ends after ... h (h = hours), Base dosing quantity ■... -
Page 13: Programme Selector
Getting to know the appliance Further information Further information Switching off the appliance automatically: Programme progress: On OFF ~ Page 8, ~ Page 33 Prewash Washing ¼ Rinse ¬ Spin - 0 - Programme end Programme end during Rinse Stop - P - Pause, e.g. -
Page 14: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 15 – Light: Do not prewash, select the P repare the laundry speedPerfect G setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 15: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 16: Overview Of Programmes
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable. - Page 17 Overview of programmes Programme/type of laundry/information Settings Max. 4 kg Mixed load of cottons and synthetic fabrics Ž - 40 °C $, 0 - 1600** rpm ecoPerfect ¦, speedPerfect G, Prewash (prelav. !), Extra Rinse (extra l), Easy-Iron (menos Ø) Detergent è, fabric softener è...
- Page 18 Overview of programmes Programme/type of laundry/information Settings Rinse / Spin (q/centrif. 0) Extra rinse/spin with selectable speed Note: . The Extra Rinse (extra l) button is set by default for $, 0 - 1600** rpm this programme. If you require a spin cycle only, press the button Easy-Iron (menos Ø) to deactivate the function.
- Page 19 Overview of programmes Programme/type of laundry/information Settings *** Hygiene (higiene plus) Max. 7 kg/5* kg Hard-wearing fabrics made of cotton or linen Ž - 60 °C Note: . Particularly suited to washing items that need to be $, 0 - 1600** rpm hygienically clean and especially kind to sensitive skin thanks to ecoPerfect ¦, speedPerfect G, the longer wash cycle at a defined temperature, higher water...
- Page 20 Overview of programmes Programme/type of laundry/information Settings *** Sport Max. 2 kg Sportswear and leisurewear made from microfibre fabrics Ž - 40 °C Notes $, 0 - 800 rpm Laundry must not be treated with fabric softener. ■ ecoPerfect ¦, speedPerfect G, Before washing, clean the detergent drawer thoroughly (all ■...
-
Page 21: Starching
Overview of programmes Programme/type of laundry/information Settings *** Automatic intensive (automático intensivo) Max. 6 kg More intensive treatment of the laundry; 60 °C The degree of soiling and the type of fabric are automatically $, 1400 rpm detected and the washing sequence and intelligent dosage are adjusted accordingly. -
Page 22: Programme Default Settings
Programme default settings The maximum speed that can be set Programme default depends on the model and programme that has been selected. settings Ready in The default programme settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after (terminado en/em) selecting the programme. -
Page 23: I-Dos Settings
Programme default settings After starting the programme i-Dos i for fabric softener (if a Ready in time has been selected Dosage strengths and the wash programme has not yet started), you can change the High: high level of softness ª preselected number of hours as follows: Medium: medium level of softness ©... -
Page 24: Additional Programme Settings
Additional programme settings Extra Rinse Additional programme (extra l) settings Additional rinse cycle for particularly sensitive skin and/or for areas with very An overview of all additional settings, A d d i t i o n a l p r o g r a m m e s e t t i n g s which can be selected depending on soft water. -
Page 25: Operating The Appliance
Operating the appliance The indicator light on the programme Operating the selector lights up and the default programme settings for the selected appliance programme appear in the display panel. Preparing the washing Temperature ■ O p e r a t i n g t h e a p p l i a n c e Spin speed machine ■... -
Page 26: Placing Laundry Into The Drum
Operating the appliance Placing laundry into the drum Measure and add detergent and care products Warning The washing machine doses your Danger of death! detergent and fabric softener Items of laundry pretreated with automatically in most programmes. cleaning agents that contain solvents, e.g. -
Page 27: Select Additional Programme
Operating the appliance Select additional programme Childlock settings (w 3s.) By selecting additional settings, you can You can lock the washing machine to better adapt the washing process to prevent the functions you have set from your items of laundry. being changed inadvertently. -
Page 28: Adding Laundry
Operating the appliance Adding laundry Cancel the programme After starting the programme, you can For programmes at high temperatures: add or remove laundry if necessary. Press the Ü button. To cool down laundry: Select Rinse . Press the Ü button to do this. Press the Ü... -
Page 29: Removing Laundry/Switching Off The Appliance
Intelligent dosing system Removing laundry/switching Intelligent dosing off the appliance system Open the door and remove the Intelligent dosing system in laundry. I n t e l l i g e n t d o s i n g s y s t e m Press the # button. -
Page 30: Everyday Use
Intelligent dosing system If intelligent dosagei-Dos ô or Notes ■ i-Dos i has been selected, the Only use easy-pour liquid products ■ corresponding indicator lights up. that the manufacturer recommends If intelligent dosage has not been adding to the detergent drawer. ■... -
Page 31: Basic Settings
Intelligent dosing system The selection (on/off) and the Note: My water hardness: selected dosage strength for i-Dos i and i-Dos ô are saved for each programme until they are changed again, even if the washing machine is switched off. Topping up the detergent/ fabric softener: Below is an example of detergent If the indicator light for the selected... -
Page 32: Manual Dosage
Intelligent dosing system Changing the basic dosages: Caution! Damage to the appliance Press the corresponding i-Dos Cleaning agents and agents for button (ô or i) for approx. 3 pretreating laundry (e.g. stain removers, seconds. The preset basic dosage prewash sprays, etc.) may cause will appear in the display panel. -
Page 33: Appliance Settings
Appliance settings Changing the signal volume Appliance settings Use the Ready in + or - button to You can change the following settings: change the following settings at the A p p l i a n c e s e t t i n g s corresponding programme selector The volume of the buttons and the ■... -
Page 34: Sensors
Sensors Sensors Cleaning and maintenance A utomatic load sensing S e n s o r s Warning Depending on the type of fabric and C l e a n i n g a n d m a i n t e n a n c e Danger of death! load, the automatic load sensing There is a risk of electric shock if you... -
Page 35: Machine Housing/Control Panel
Cleaning and maintenance Machine housing/control b) Pull the catch (A) on the back of the drawer handle (in the centre panel at the bottom) slightly towards you. This unlocks the drawer Wipe the housing and the control ■ handle (B), which you can then panel with a soft, damp cloth. - Page 36 Cleaning and maintenance Cleaning the dispensers/detergent drawer: The detergent drawer can be removed completely to allow you to clean to dispensers after you have emptied them. a) Empty the dispensers before removing the drawer. – Protect the rear drawer connector Only put the drawer handle Note: against water, detergent or fabric-...
-
Page 37: The Drain Pump Is Blocked, Emergency Draining
Cleaning and maintenance The drain pump is blocked, Refit the pump cover and screw it on tightly. The handle must be in a emergency draining vertical position. Warning Risk of scalding! When you wash at high temperatures, the water gets very hot. If you come into contact with the hot water, you may be scalded. -
Page 38: Filter In The Water Supply Blocked
Faults and what to do about them. Filter in the water supply Faults and what to do blocked about them. First, reduce the water pressure in the Emergency release supply hose: F a u l t s a n d w h a t t o d o a b o u t t h e m . Turn off the tap. -
Page 39: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and Ï The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■... -
Page 40: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. Faults Cause/Remedy Water is leaking out. Attach the drain hose correctly or replace it. ■ Tighten the screw connection of the drain hose. ■ The machine is not filling Have you pressed the Ü... - Page 41 Faults and what to do about them. Faults Cause/Remedy The programme is taking Not a fault – the unbalanced load detection system is adjusting an ■ longer than usual. imbalance by repeatedly distributing the laundry. Not a fault – the foam detection is system active – a rinse cycle has been ■...
-
Page 42: After-Sales Service
After-sales service Faults Cause/Remedy - P - and Ï appear in the The door is unlocked. It is possible to add laundry. display panel when the cycle is paused. If you cannot rectify a fault yourself (after switching the machine off and on again) or a repair is required: Switch off the appliance and pull out the mains plug. -
Page 43: Consumption Rates
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption* consumption*... -
Page 44: Efficiency Test Programmes For Cotton Fabrics
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for Cottons in accordance with the (EU) directive no. 1015/2010 Programme + temperature + button Load Approximate programme du-... -
Page 45: Positioning And Connecting
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions Included with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:... -
Page 46: Safety Instructions
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine. -
Page 47: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transport brace screws. -
Page 48: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Water inlet Left-hand connection Warning ■ Danger of death! There is a risk of electric shock if you touch live components. Do not immerse the Aqua-Stop safety valve in water (it contains an electric valve). -
Page 49: Water Outlet
Positioning and connecting When the tap is open, the water flow Water outlet rate is at least 8 l/min. Warning If the water pressure is higher than this, Risk of scalding! a pressure-reducing valve must be When you are washing at high installed. -
Page 50: Levelling
Positioning and connecting Levelling Connection Drainage into a washbasin Align the appliance using a spirit level. ■ Incorrect alignment may result in loud noises, vibrations and machine "movement". Loosen the lock nuts using a WAF17 spanner, by turning it in a clockwise direction. -
Page 51: Electrical Connection
Positioning and connecting Electrical connection The mains plug can be accessed at ■ all times. The mains cable is not kinked, Warning ■ squashed, altered or cut through. Danger of death! The mains cable does not come into There is a risk of electric shock if you ■... -
Page 52: Before Washing For The First Time
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■... -
Page 53: Transportation
Positioning and connecting Transportation Installing the transport braces: Remove the covers and keep them E.g. when moving house in a safe place. Use a screwdriver if necessary. Caution! Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers. Leaking detergent/fabric softener can prevent the appliance from working correctly, e.g. -
Page 54: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty Only for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 56 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG *9001095360* 9001095360...