hit counter script
Toshiba Satellite Pro A120-106 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite Pro A120-106
  6. User manual

Toshiba Satellite Pro A120-106 User Manual

Portable personal computer
Hide thumbs
Table of Contents

Advertisement

Quick Links

User's Manual
TECRA A8 / Satellite Pro A120

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite Pro A120-106

Summary of Contents for Toshiba Satellite Pro A120-106

  • Page 1 User’s Manual TECRA A8 / Satellite Pro A120...
  • Page 2 Photo CD is a trademark of Eastman Kodak. Sonic RecordNow! is a registered trademark of Sonic Solutions. Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license. i.LINK is trademark and registered trademark of Sony Corporation.
  • Page 3 EMC (Electromagnetic Compatibility) and safety standards. However, Toshiba cannot guarantee that this product still observes these EMC standards if accessories or cables not manufactured / distributed by Toshiba are connected or implemented. To avoid in general EMC problems, the following advice should be observed: ■...
  • Page 4 Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

  • Page 5: Optical Disc Drive Safety Instructions

    Optical disc drive safety instructions The optical disc drive employs a laser system. To ensure proper use of this product, please read the manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 6 User’s Manual...

  • Page 7: Table Of Contents

    Table of Contents Preface General Precautions Introduction Chapter 1 Equipment checklist........1-1 Features.
  • Page 8 Replacing the battery pack ....... . .6-10 TOSHIBA Password Utility ....... . .6-12 Power-up modes .
  • Page 9 TOSHIBA support ........
  • Page 10 User’s Manual...

  • Page 11: Preface

    Preface Congratulations on your purchase of the TECRA A8 / Satellite Pro A120 computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your TECRA A8 / Satellite Pro A120 computer.
  • Page 12 Chapter 6, Power and Power-Up power resources and battery save modes and how to set a password. Chapter 7, HW Setup program and TPM. Chapter 8, Optional Chapter 9, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn’t seem to be working properly.
  • Page 13 Display Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment.
  • Page 14 Preface User’s Manual...

  • Page 15: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
  • Page 16 Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time (if you rest the computer on your lap, or if you keep your hands on the palm rest, for example) your skin might suffer low-heat injury.

  • Page 17: Equipment Checklist

    Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
  • Page 18 TOSHIBA Zooming Utility ■ TOSHIBA Controls ■ TOSHIBA Acoustic Silencer ■ TOSHIBA Hotkey Utility ■ TOSHIBA SD Memory Card Format Utility ■ TOSHIBA SD Memory Boot Utility ■ TOSHIBA HDD Protection ■ TOSHIBA Display Device Change Utility ■ TOSHIBA Password Utility ■...

  • Page 19: Features

    If any of the items are missing or damaged, contact your dealer immediately. Features The computer uses TOSHIBA’s advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and...
  • Page 20 Some models in this series carry Intel which is based on three separate technologies of Intel processor, Intel 945 Express Chipset Family. Some models of the computers carry Intel which is based on three separate technologies of Intel processor, Intel 945 Express Chipset Family.

  • Page 21: Optical Disk Drive

    Legal Footnote (Battery Life) For more information on the Legal Footnote regarding Battery Life, please refer to the Legal Footnotes RTC battery AC adaptor Disks Hard Disk Drive (HDD) Capacity Legal Footnote (Hard Disk Drive (HDD) Capacity) For more information on the Legal Footnote regarding Hard Disk Drive (HDD) Capacity, please refer to the Click the *4.
  • Page 22 CD-ROM drive DVD-ROM drive DVD-ROM&CD-R/RW drive Some models are equipped with a full-size, CD-ROM drive module that lets you run CD without using an adaptor. It reads CD-ROMs at maximum 24 speed. This drive supports the following formats: ■ CD-DA ■...
  • Page 23 DVD Super Multi drive 2.6GB and 5.2GB DVD-RAM discs cannot be read from or written to. Display The computer’ LCD display panel supports high-resolution video graphics. The LCD screen can be set at a wide range of viewing angles for maximum comfort and readability.

  • Page 24: Toshiba Pointing Device

    Legal Footnote (Graphics Processor Unit ( For more information on the Legal Footnote regarding Graphics Processor Unit (“GPU”), please refer to the Click the *6. Keyboard Built-in TOSHIBA Pointing Device Built-in Touch Pad Ports Serial External monitor Universal Serial Bus (USB 2.0)
  • Page 25 Multimedia Sound system Video-out jack (S-Video) Headphone jack Microphone jack Communications Modem Bluetooth User’s Manual The Windows sound system compatible sound system provides output to internal speakers and a microphone as well as supporting jacks for an external microphone and headphones. The video out jack lets you transfer video data to external devices.
  • Page 26 Wireless LAN ■ The values shown above are the theoretical maximums for Wireless LAN standards. The actual values may differ. ■ The transmission speed over the Wireless LAN and the distance over which Wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations.

  • Page 27: Special Features

    Security Security lock slot Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. TOSHIBA Assist button TOSHIBA Presentation button Hot keys Display automatic power off HDD automatic...
  • Page 28 You can specify the setting in the When I close the lid item of the Setup Actions tab in TOSHIBA Power Saver. When battery power is exhausted to the point that computer operation cannot be continued, the system automatically enters Hibernation and shuts down.

  • Page 29: Utilities

    TOSHIBA Presentation button (default setting is the simultaneous display on LCD and CRT with resolution of 1,024 × 768) and to the TOSHIBA Assist button (default setting is the TOSHIBA Assist). To access this utility, click start, point to Control Panel, choose Printers and Other Hardware and click the Toshiba Controls icon.
  • Page 30 InterVideo WinDVD. This software enables communication between remote Bluetooth devices. The TOSHIBA SD Memory Boot utility allows you to create a bootable SD memory card to start the system. You can access TOSHIBA SD Memory Boot Utility from the menu bar as follows. Click...
  • Page 31 TOSHIBA Mobile Extension TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities to TOSHIBA Touchpad ON/OFF Utility TOSHIBA Password Utility TOSHIBA Accessibility DLA for TOSHIBA TOSHIBA Hotkey Utility for Display Devices TOSHIBA SD Memory Card Format CD/DVD Drive Acoustic Silencer User’s Manual...

  • Page 32: Options

    ® models. A battery pack (3600 mAh or 4400 mAh) can be additionally purchased from your TOSHIBA dealer. Use it as a spare or replacement. If you use your computer at more than one site frequently, it may be convenient to purchase an additional AC adaptor for each site so you will not have to carry the adaptor with you.

  • Page 33: Chapter 2 The Grand Tour

    The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Legal Footnote (Non-applicable Icons) For more information on the Legal Footnote regarding Non-applicable Icons, please refer to the Click the *8.
  • Page 34 Wireless communication switch ■ Turn Wireless LAN and Bluetooth functionalities off when near a person who may have a cardiac pacemaker implant or other medical electric device. Radio waves may affect pacemaker or medical device operation, possibly resulting in serious injury. Follow the instruction of your medical device when using any Wireless LAN or Bluetooth functionality.

  • Page 35: Left Side

    Left side Figure 2-2 shows the computer’s left side. Cooling vents Do not block the cooling vents. Never allow metal objects, such as screws, staples and paper clips, to enter the PC or keyboard. Foreign metal objects can create a short circuit, which can cause PC damage and fire, possibly resulting in serious injury.

  • Page 36: Right Side

    Right side Figure 2-3 shows the computer’s right side. Security lock slot Optical disk drive Back side Figure 2-4 shows the computer’s back side. Modem jack Serial port Video-out jack Depending on the model, a Video-out jack is not present. Optical disk drive Figure 2-3 The right side of the computer A security cable attaches to this slot.
  • Page 37 External monitor port DC IN 15V jack Modem jack ■ Connection to any communication line other than an analog phone line could cause a PC system failure. ■ Connect the built-in modem only to ordinary analog phone lines. ■ Never connect the built-in modem to a digital line (ISDN). ■...

  • Page 38: Serial Port

    LAN active indicator (orange) i.LINK (IEEE1394) port Depending on the model, an i.LINK (IEEE1394) port is not present. Serial port Depending on the model, a serial port is not present. Universal Serial Bus (USB 2.0) ports Keep foreign objects out of the USB connectors. Never allow metal objects, such as screws, staples and paper clips, to enter the PC or keyboard.

  • Page 39: Underside

    Underside Figure 2-5 shows the underside of the computer. Make sure the display is closed before turning over your computer. Memory module cover HDD pack cover Battery lock Battery pack Notches Battery release latch Docking port Depending on the model, a docking port is not present. User’s Manual Notches Battery release latch...

  • Page 40: Front With The Display Open

    Refer to the Memory expansion Chapter 8, Optional The built-in HDD is under this cover. Display hinge LCD Sensor switch (Not shown) button TOSHIBA Presentation button section in Devices. screen Stereo speaker (Right) Touch Pad Touch Pad control buttons User’s Manual...

  • Page 41: Display Controller

    This setting is supported in Windows XP only. Pressing the button again can be changed single display mode on an internal monitor only. You can specify the function of TOSHIBA Presentation button in the TOSHIBA Controls properties. Depending on the model, TOSHIBA Presentation button is not present.

  • Page 42: System Indicators

    When the computer is in Standby or Hibernation Mode or turned off, press this button to start the computer and launch the program. You can specify the function of TOSHIBA Assist button in the TOSHIBA Controls properties. Depending on the model, TOSHIBA Assist button is not present.

  • Page 43: Keyboard Indicators

    Power Battery Wireless communication Keyboard indicators The figures below show the positions of the keypad overlay indicators and the Caps Lock indicator. When the Arrow mode indicator glows the keypad overlay lets you control the cursor. When the Numeric mode indicator glows the keypad overlay lets you enter numbers.

  • Page 44: Usb Floppy Disk Drive

    Arrow mode Arrow mode Numeric mode USB floppy disk drive The USB floppy disk drive accommodates 1.44-megabyte or 720-kilobyte floppy disk and connects to the USB port. It is supplied as standard with some models and as an option with others. USB connector Disk-In-Use Indicator...

  • Page 45: Optical Disk Drives

    Floppy disk slot Eject button Check the Disk-In-Use indicator when you use the USB floppy disk drive. Do not press the eject button or turn off the computer while the light is glowing. Doing so could destroy data and damage the floppy disk or the drive.

  • Page 46: Writable Discs

    Writable discs This section describes the types of writable CD/DVD discs. Check the specifications for your drive for the type of discs it can write. Use RecordNow! to write compact discs. Refer to Chapter 4, ■ CD-R discs can be written only once. The recorded data cannot be erased or changed.

  • Page 47: Dvd Super Multi Drive

    DVD-ROM&CD-R/RW drive The full-size DVD-ROM&CD-R/RW drive module lets you record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.

  • Page 48: Ac Adaptor

    For use in other regions, please buy power cords that conform to safety rules and regulations in the particular region. Always use the TOSHIBA AC adaptor that was provided with your PC and the TOSHIBA Battery Charger (that may have been provided with your PC), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the PC.

  • Page 49: Chapter 3 Getting Started

    Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Connecting the AC adaptor ■ Opening the display ■ Turning on the power ■ Starting up for the first time ■...

  • Page 50: Connecting The Ac Adaptor

    Chapter 6, ■ Always use the Toshiba AC adaptor that was provided with your PC and the Toshiba Battery Charger (that may have been provided with your PC), or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the PC.
  • Page 51 ■ The supplied power cord conforms to safety rules and regulations in the region the product is bought and should not be used outside this region. For use in other regions, please buy power cords that conform to safety rules and regulations in the particular region. ■...

  • Page 52: Opening The Display

    2. Connect the AC adaptor’s DC output plug to the DC IN 15V jack on the back of the computer. 3. Plug the power cord into a live wall outlet. The Battery and DC IN indicators on the front of the computer should glow. Opening the display The computer’s LCD display panel can be opened in a wide range of angles for optimal viewing.

  • Page 53: Turning On The Power

    Turning on the power This section describes how to turn on the power. The Power button LED indicates the status. Refer to the section in Chapter 6, Power and Power-Up Modes. ■ After you turn on the power for the first time, do not turn it off until you have set up the operating system.

  • Page 54: Turning Off The Power

    ■ When the AC adaptor is connected, the computer will go into Standby Mode according to the settings in the TOSHIBA Power Saver utility. ■ To restore operation from Standby Mode, press the power button or press any key. The latter action only works on the internal keyboard if the Wake-up on Keyboard option is enabled in HW Setup.
  • Page 55 1. Click start, click Turn Off Computer and click Stand By. 2. Close the computer’s LCD display panel. This feature must be enabled. Refer to the Setup Actions tab in TOSHIBA Power Saver Utility described in the Control Panel. Open Performance and Maintenance and open TOSHIBA Power Saver.

  • Page 56: Hibernation Mode

    For the computer to shut down in Hibernation Mode, this feature must be enabled in two places: the Hibernate tab in Power Options and Setup Actions tab in TOSHIBA Power Saver. If you do not configure this feature, the computer will shut down in Standby Mode - if battery power becomes depleted, data saved in Standby Mode will be lost.

  • Page 57: Starting Hibernation Mode

    3. Select the Hibernate window in the Power Options Properties, select the Enable hibernation check box and click the Apply button. 4. Open TOSHIBA Power Saver. 5. Select the Setup Action window. 6. Enable the desired Hibernation settings for When I press the power button and When I close the lid.

  • Page 58: Restarting The Computer

    Restoring TOSHIBA utilities and drivers If Windows is working properly, individual drivers or applications can be separately restored. The TOSHIBA Tools & Utilities folder (C:\TOOLSCD) contains drivers and applications, which are included with your computer system. If your system drivers or applications have become damaged in some way, you can reinstall most of the components from this folder.

  • Page 59: Chapter 4 Operating Basics

    Operating Basics This chapter describes the basic operations of your computer and precautions when using it, as well as the handling of CD/DVD. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.

  • Page 60: Using The Usb Floppy Disk Drive

    You can also tap the Touch Pad to perform functions similar to those of the left button. Click: Tap once Double-click: Tap twice Drag and drop: Tap to select the material you want to move. Leave your finger on the Touch Pad after the second tap and move the material.

  • Page 61: Using The Usb Floppy Disk Drive

    Disconnecting USB floppy disk drive When you have finished using the USB floppy disk drive, follow the procedures below to disconnect it: 1. Wait for the indicator light to go out to make sure all floppy disk activity has stopped. If you disconnect the USB floppy disk drive or turn off the power while the computer is accessing the drive you may lose data or damage the floppy disk or the drive.
  • Page 62 2. Grasp the disc tray gently and pull until it is fully opened. 3. Lay the CD/DVD, label side up, in the disc tray. When the disc tray is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the disc tray.

  • Page 63: Removing Discs

    5. Push the center of the disc tray to close it. Press gently until it locks into place. If the CD/DVD is not seated properly when the disc tray is closed, the CD/DVD might be damaged. Also, the disc tray might not open fully when you press the eject button.

  • Page 64: Writing Cds On Dvd-Rom&Cd-R/Rw Drive

    3. Push the center of the disc tray to close it. Press gently until it locks into place. How to remove CD/DVD when the disc tray will not open Pressing the eject button will not open the disc tray when the computer power is off.

  • Page 65: Before Writing Or Rewriting

    RICOH Co., Ltd. Ultra-Speed CD-RW: MITSUBISHI CHEMICAL CORPORATION TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ The actual number of rewrites to CD-RW is affected by the quality of the disc and the way it is used.

  • Page 66: Writing Cd/Dvds On Dvd Super Multi Drive

    When writing or rewriting Note the following when you write or rewrite a CD-R or CD-RW. ■ Always copy data from the hard disk drive to the optical media. Do not use cut-and-paste as the original data will be lost if there is a write error. ■...

  • Page 67: Important Message

    Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/RW or DVD-R/-R DL/-RW/+R/+R DL/+RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. CD-R: TAIYO YUDEN CO., LTD.
  • Page 68 DVD-R: DVD Specifications for Recordable Disc for General Version 2.0 TAIYO YUDEN CO., LTD. Matsushita Electric Industrial Co., Ltd. DVD-R DL: MITSUBISHI CHEMICAL CORPORATION. DVD+R: MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. DVD+R DL: MITSUBISHI CHEMICAL CORPORATION DVD-RW: DVD Specifications for Recordable Disc for Version 1.1 or version VICTOR COMPANY OF JAPAN.LIMITED MITSUBISHI CHEMICAL CORPORATION DVD+RW:...
  • Page 69 ■ You can use DVD-RAM discs that can be removed from a cartridge and DVD-RAM discs designed without a cartridge. ■ Other DVD-ROM drives for computers or other DVD players may not be able to read DVD-R/-R DL/-RW or DVD+R/+R DL/+RW discs. ■...

  • Page 70: When Writing Or Rewriting

    The original data will be lost if there is a write error. DISC created in DVD-R DL format4 (Layer Jump Recording) cannot be read. RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: ■ DVD-Video cannot be created using RecordNow!.

  • Page 71: Data Verification

    ■ You cannot back up DVD-ROM, DVD-Video, DVD-R/-R DL/-RW or DVD+R/+R DL/+RW to CD-R/RW using the “Exact Copy” function of RecordNow!. ■ RecordNow! cannot record in packet format. ■ You might not be able to use the “Exact Copy” function of RecordNow! to back up a DVD-R/-R DL/-RW or DVD+R/+R DL/+RW disc that was made with other software on a different DVD-R/-R DL/-RW or DVD+R/+R DL/+RW recorder.

  • Page 72: Dla For Toshiba

    DLA for TOSHIBA Note the following limitations when you use DLA: ■ This software supports only rewritable discs (DVD+RW, DVD-RW, and CD-RW). It does not support DVD+R/+R DL, DVD-R/-R DL, and CD-R discs that are not rewritable. ■ DLA does not support formatting and writing to a DVD-RAM disc - these functions are performed by DVD-RAM Driver Software.

  • Page 73: How To Learn More About Intervideo Windvd Creator

    How to make a DVD-Video Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder: 1. Click Start -> All Programs -> InterVideo WinDVD Creator2 -> InterVideo WinDVD Creator to launch WinDVD Creator. 2. Click Capture button then capture the video data from the DV-Camcorder via IEEE1394.
  • Page 74 2. Before recording the video to DVD ■ When you record to DVD discs, please use only media recommended by TOSHIBA. ■ Do not set the working drive to a slow device like a USB 1.1 hard disk drive or it will fail to write the DVD.

  • Page 75: Media Care

    4. About recorded DVDs ■ Some DVD-ROM drives for personal computers or other DVD players may not be able to read DVD-R/+R/-R DL/+R DL/-RW/+RW/-RAM discs. ■ When playing your recorded disc on your computer, please use the WinDVD software application. ■...

  • Page 76: Sound System

    5. Never put a floppy disk in a location where water or other liquid may contact it or where it is excessively damp. It could cause data loss. Never use a wet or damp floppy disk. It could damage the floppy disk drive or other devices.

  • Page 77: Modem

    Check the specified areas carefully before using it. To select a region, follow the steps below. 1. Click start, point to All Programs, point to TOSHIBA, point to Networking and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 78: Properties Menu

    Properties menu Click the icon with the secondary mouse button to display properties menu on the screen. Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region.
  • Page 79 Connecting To connect the modular cable, follow the steps below. The modular cable that comes with the computer must be used to connect the modem. Connect the end of the modular cable with the core to the computer. ■ Connection to any communication line other than an analog phone line could cause a PC system failure.

  • Page 80: Wireless Communications

    Disconnecting To disconnect the internal modular cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector. 2. Disconnect the cable from the computer’s modem jack in the same manner. Wireless communications The computer’s wireless communication function supports both Wireless LAN and Bluetooth devices.

  • Page 81: Worldwide Operation

    ■ TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the Wireless LAN and the damage thereof. Bluetooth wireless technology Some models in this series are equipped with Bluetooth™...

  • Page 82: Product Support

    Please refer also to the electronic information which is included with each software. This Bluetooth™ Stack is based on Bluetooth™ Version 1.1/1.2/2.0+EDR specification. TOSHIBA cannot confirm compatibility between any PC products and/or other electronic devices that use Bluetooth™ other than TOSHIBA mobile PCs.

  • Page 83: Wireless Communication Switch

    Wireless communication switch You can enable or disable Wireless LAN and Bluetooth functions, with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch to the right to turn it on and to the left to turn it off. ■...

  • Page 84: Lan

    The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T (only for Intel This section describes how to connect/disconnect to a LAN. Do not install or remove an optional memory module while Wake-up on LAN is enabled.

  • Page 85: Cleaning The Computer

    1. Turn off the power to the computer and to all external devices connected to the computer. 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. 3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub.

  • Page 86: Moving The Computer

    Moving the computer The computer is designed for rugged durability. However, a few simple precautions taken when moving the computer will help ensure trouble-free operation. ■ Before moving the computer, it recommends changing the function of HDD Protection. Refer to the section, Protection, in this chapter.

  • Page 87: Taskbar Icon

    Protection TOSHIBA HDD Protection Properties You can make the HDD Protection settings by using the TOSHIBA HDD Protection Properties window. To open the window, click start, point to All Programs, point to TOSHIBA, point to Utilities and click HDD Protection setting.

  • Page 88: Hdd Protection

    Details To open the Details window, click the Setup Detail button in the TOSHIBA HDD Protection Properties window. Detection Level Amplification When the AC adaptor is disconnected or the lid is closed, HDD Detection assumes that the computer will be carried and sets the detection level to the maximum for 10 seconds.

  • Page 89: Heat Dispersal

    CPU speed. Or, by lowering the CPU speed first, then if necessary, turning on the fan. Use the Cooling Method item of the Basic Setup tab in TOSHIBA Power Saver. When the CPU temperature falls to a normal range, the fan is turned off and the CPU operation returns to standard speed.
  • Page 90 Operating Basics 4-32 User’s Manual...

  • Page 91: Chapter 5 The Keyboard

    The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with.

  • Page 92: Function Keys: F1

    Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 93: Hot Keys

    Press Fn + F10 or Fn + F11 to access the integrated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys (Fn + F11) or cursor control keys (Fn + F10). Refer to Keypad overlay operate these keys.
  • Page 94 F2 again to toggle between the settings. Release both Fn and F2 to put the new setting into effect. You can also change this setting through the Profile options in TOSHIBA Power Saver. Standby: When you press Fn + F3, the computer enters the Standby Mode.
  • Page 95 You can also change this setting through the Screen brightness item of the Basic Setup tab in TOSHIBA Power Saver. ■ The brightness level is always set at the maximum value for about 18 seconds, when the internal LCD screen turns on.

  • Page 96: Fn Sticky Key

    Fn key. Fn Sticky key You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and then press an “F number” key. To start the TOSHIBA Accessibility Utility, click start, point to All Programs, point to TOSHIBA, point to Utilities and click Accessibility.

  • Page 97: Windows Special Keys

    Windows special keys The keyboard provides two keys that have special functions in Windows: Windows logo key activates the start menu and the other, the application key, has the same function as the secondary mouse button. This key activates the Windows start menu. This key has the same function as the secondary mouse button.

  • Page 98: Numeric Mode

    Numeric mode To turn on the Numeric mode, press Fn + F11. The Numeric mode indicator lights. Now try numeric data entry using the keys in figure 5-2. Press Fn + F11 again to turn off the overlay. Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1.

  • Page 99: Generating Ascii Characters

    Temporarily changing modes If the computer is in Numeric mode, you can switch temporarily to Arrow mode by pressing a shift key. If the computer is in Arrow mode, you can switch temporarily to Numeric mode by pressing a shift key. Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation.
  • Page 100 The Keyboard 5-10 User’s Manual...

  • Page 101: Chapter 6 Power And Power-Up Modes

    Power and Power-Up Modes The computer’s power resources include the AC adaptor, battery pack and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer’s operating capability and battery charge status are affected by the power conditions: whether an AC adaptor is connected, whether a...

  • Page 102: Power Indicators

    For the computer to shut down in Hibernation mode, the Hibernation feature must be enabled in two places in TOSHIBA Power Saver: the Hibernate window and the Battery Alarm item of the Alarm window. If a main battery and a 2nd battery are installed, the computer does not shut down until the charge in both batteries is exhausted.

  • Page 103: Battery Types

    If the battery pack becomes too hot while it is being charged, the charge will stop and the Battery indicator will go out. When the battery pack’s temperature falls to a normal range, charge will resume. This occurs whether the computer’s power is on or off. DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected:...
  • Page 104 The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Always use the battery pack supplied as an accessory or an equivalent battery pack specified in the User’s Manual.

  • Page 105: Care And Use Of The Battery Pack

    The computer’s RTC battery is a Ni-MH battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations.

  • Page 106: Charging The Batteries

    The Battery indicator glows orange when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger.

  • Page 107: Battery Charging Notice

    Time The following table shows the approximate time required to fully charge a discharged battery. Battery type Battery pack (3600 mAh) Battery pack (4400 mAh) RTC battery The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer.

  • Page 108: Monitoring Battery Capacity

    Therefore, an often used, older battery will not operate for as long as a new battery even when both are fully charged. In this case, TOSHIBA Power Saver will indicate a 100% charge for both the old and new battery, but the displayed estimated time remaining will be shorter for the older battery.

  • Page 109: Retaining Data With Power Off

    ■ The condition of the battery terminals. Make sure the battery terminals stay clean by wiping them with a clean dry cloth before installing the battery pack. Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods: Battery type Battery pack (3600 mAh)

  • Page 110: Replacing The Battery Pack

    Replacing the battery pack The battery pack is classified as a consumable item. The operating life of the battery pack will gradually reduce through repeated charging and discharging. It will need to be replaced when it reaches the end of its operating life. You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source.
  • Page 111 8. Separate the battery pack and battery cover by releasing the latches. To install a battery pack, follow the steps below. Do not touch the battery release latch while holding the computer. Or you may get injured by the dropped battery pack by unintentional release of the battery release latch.

  • Page 112: Toshiba Password Utility

    Windows password. User Password To start the utility, point to or click the following items: start -> All Programs -> TOSHIBA -> Utilities -> Password Utility The User Password dialog box contains two main fields: User Password and User Token.
  • Page 113 ■ If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE. TOSHIBA will NOT be held...

  • Page 114: Supervisor Password

    Register, delete or change the Supervisor Password. ■ Create or invalidate a Supervisor Password token. This function in the TOSHIBA Password Utility lets you invalidate only supervisor tokens or all tokens, including user and supervisor tokens. ■ Specify restrictions for general users.

  • Page 115: Power-Up Modes

    Chapter 3, Windows utilities You can configure various settings associated with both Standby Mode and Hibernation Mode within TOSHIBA Power Saver. Hot keys You can use hot keys Fn + F3 to enter Standby Mode and Fn + F4 to enter Hibernation.
  • Page 116 Power and Power-Up Modes 6-16 User’s Manual...

  • Page 117: Chapter 7 Hw Setup

    HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer, and provides information on setting up the Execute-Disable Bit Capability and TPM. Accessing HW Setup To run HW Setup, click start, click Control Panel, click Printers and Other Hardware and select TOSHIBA HWSetup.
  • Page 118 General This window displays the BIOS version and contains two buttons: Default and About. Default About Setup This field displays BIOS Version and date. Display This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor. Power On Display Lets you select the display to be used when the computer is booted.

  • Page 119: Boot Priority

    Boot Priority Boot Priority Options This option sets the priority for booting the computer. Select from the following settings: HDD −> FDD −> CD-ROM −> LAN FDD −> HDD −> CD-ROM −> LAN HDD −> CD-ROM −> LAN −> FDD FDD −>...
  • Page 120 To change the boot drive, follow the steps below. 1. Hold down F12 and boot the computer. 2. The following menu will be displayed with the following icons: Built-in HDD, CD-ROM, FDD (or SD memory card), Network (LAN), USB Memory boot. A bar will appear only under the selected device.
  • Page 121 HDD Priority Options If more than one HDD is installed in the computer, this option lets you set the priority for HDD detection. If the first detected HDD has a boot command, the system will boot from the HDD. Built-in HDD -> USB (Default) USB ->...
  • Page 122 Keyboard External Keyboard Fn key Use this option to set a key combination on an external keyboard to emulate the Fn key on the computer’s internal keyboard. Setting an Fn key equivalent will let you use Hot keys by pressing the set combination instead of the Fn key (PS/2 keyboard only).
  • Page 123 This function lets you set the CPU operating mode. This option is displayed only on models with an Intel processor and Intel Dynamic CPU Frequency Mode This option lets you choose from the following settings: Dynamically Switchable Always High Always Low Wake-up on LAN This feature lets the computer’s power be turned on when it receives a wake-up signal from the LAN.

  • Page 124: Device Config

    Device Config Device Configuration This option lets you set the device configuration. All Devices Setup by OS Parallel/Printer Some models are equipped with Parallel/Printer tab. This tab lets you set the Parallel Port Mode. Use the Windows Device Manager to make settings for the Parallel port.

  • Page 125: Starting And Ending The Bios Setup Program

    ■ In most cases, changes to the system’s configuration should be made within Windows by using applications such as TOSHIBA HW Setup, TOSHIBA Password Utility, TOSHIBA Power Saver, Windows Device Manager and so forth. If you make changes to the configuration through the BIOS setup program, please be aware that the configuration set through the Windows applications will take priority.

  • Page 126: Virtualization Technology

    Ending the BIOS Setup Program Halfway The configuration settings can be terminated halfway without saving any of the changes made. 1. Press the Esc key. The “Exit without saving? (Y/N)” message is displayed. 2. Press the Y key. The BIOS setup program will end. Core Multi-Processing The Core Multi-Processing sets the CPU operating mode.

  • Page 127: Security Controller

    Windows XP. Available Not Available System configuration changes, other than changes to this setting, should be made within Windows by using applications such as TOSHIBA HW Setup, TOSHIBA Password Utility, TOSHIBA Power Saver, Windows Device Manager and so forth. Security controller The security controller settings are available in SYSTEM SETUP (2/2).

  • Page 128: Diagnostic Mode

    ■ System configuration changes other than changes to this setting should be made in Windows using TOSHIBA HW Setup, TOSHIBA Password Utility, TOSHIBA Power Saver, Device Manager, etc. ■ When using TPM, please install the Infineon TPM Installation Guide from the TOSHIBA Application Installer.

  • Page 129: Chapter 8 Optional Devices

    Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■ PC card ■ SD card ■ Memory expansion Power devices ■...

  • Page 130: Pc Card

    The computer is equipped with a PC card slot that can accommodate a Type II card. Any PC card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC cards, including PC card 16’s multifunction card and CardBus PC cards.

  • Page 131: Sd Card

    Removing a PC card To remove the PC card, follow the steps below. 1. Open the Safely Remove Hardware icon on the Task Bar. 2. Point to PC card and click. 3. Press the PC card eject button to extend it. If the PC card is not inserted all the way, the eject button may not cause it to pop out sufficiently to allows it to be grasped.

  • Page 132: Formatting An Sd Memory Card

    TOSHIBA SD memory card format utility, not with the format commands provided within Windows. In order to run TOSHIBA SD memory card format, click start, point to All Programs, point to TOSHIBA, point to Utilities and click SD memory card Format.

  • Page 133: Removing An Sd Card

    Removing an SD card To remove an SD card, follow the steps below. 1. Open the Safely Remove Hardware icon on the Task Bar. 2. Point to SD card and click. 3. Push in the SD card and release it to pop the card out slightly. 4.

  • Page 134: Memory Expansion

    Creation of a boot disk Within the TOSHIBA SD Memory Boot Utility, a bootable SD memory card can be created if required. Refer to the for details. Memory expansion You can install additional memory in the computer’s memory module slot to increase the amount of RAM.

  • Page 135: Installing A Memory Module

    Installing a memory module There are slots for two memory modules, one over the other. The procedures are the same for installing either module. 1. Set the computer to boot mode and turn the computer’s power off. Make sure the Power indicator is off. Refer to the section in Chapter 3, 2.
  • Page 136 Align the grooves along the edges of the memory module with the locking tabs on the connector and insert the module into the connector firmly. If you find it difficult to install the memory module, gently prize the locking tabs outwards using the tip of your finger. Ensure that you hold the memory module along its left and right hand edges - the edges with the grooves in.

  • Page 137: Removing A Memory Module

    Removing a memory module To remove the memory module, make sure the computer is in boot mode then: 1. Set the computer to boot mode and turn the computer’s power off. Make sure the Power indicator is off. 2. Remove AC adaptor and all cables connected to the computer. 3.

  • Page 138: Battery Pack

    Battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. Refer to Chapter 6, and Power-Up AC adaptor If you frequently transport the computer between different sites such as...

  • Page 139: Using The Toshiba Assist Button Or Toshiba Presentation

    2. Connect the TV adaptor cable’s S-Video plug to the Video-out jack on the TV. 3. Press the TOSHIBA Assist button or TOSHIBA Presentation button. You can use the hot keys Fn + F5 to change the display device. Refer to Chapter 5, To open “TOSHIBA Controls”...

  • Page 140: Changing The Resolution

    If a television is connected to the computer (Intel Processor model), set the TV type in Display Properties. Follow the steps below. a. Click start and click Control Panel. b. Double-click the Display icon to open the Display Properties window. c.

  • Page 141: I.link (Ieee1394)

    There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. ■ Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.
  • Page 142 Connecting 1. Make sure the connectors are properly aligned and plug the i.LINK (IEEE1394) cable into the computer. Figure 8-17 Connecting the i.LINK (IEEE1394) cable into the computer 2. Plug the other end of the cable into the device. Note the following when you use i.LINK: ■...

  • Page 143: Advanced Port Replicator Iii Plus

    Advanced Port Replicator III Plus In addition to the ports available on the computer, the Advanced Port Replicator III Plus provides serial port and separate ports for PS/2 mouse and PS/2 keyboard. The Advanced Port Replicator III Plus connects directly to the docking interface on the underside of the computer. The AC adaptor connects the Advanced Port Replicator III Plus to a power source.

  • Page 144: Serial Port

    The following ports and accessories are available on the Advanced Port Replicator III Plus. ■ RJ45 LAN jack ■ RJ11 Modem jack ■ External monitor port ■ Parallel port ■ Serial port ■ PS/2 mouse port ■ PS/2 keyboard port ■...

  • Page 145: Security Lock

    Security lock Security locks enable you to anchor your computer and optional Advanced Port Replicator III Plus to a desk or other heavy object to help prevent unauthorized removal of the computer or Advanced Port Replicator III Plus. The computer has a security lock slot on the left side. Attach one end of a cable to a desk and the other end to the security lock slot.
  • Page 146 Optional Devices 8-18 User’s Manual...

  • Page 147: Troubleshooting

    Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 148: Preliminary Checklist

    Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 149: Hardware And System Checklist

    Hardware Before using a peripheral device or application software that is not an authorized Toshiba part or product, make sure the device or software can be used with your PC. Use of incompatible devices may cause injury or may damage your PC.

  • Page 150: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: ■...

  • Page 151: Ac Power

    Computer shuts down and its DC IN indicator is flashing green AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator. Refer to Chapter 6, for more information. Problem AC adaptor doesn’t power the computer (DC IN indicator does not glow green)
  • Page 152 If you frequently recharge a partially charged battery, the battery might not charge to its full potential. Fully discharge the battery, then try to charge it again. Check the power consumption settings in TOSHIBA Power Saver utility. Consider using a power saving mode. User’s Manual...

  • Page 153: Real Time Clock

    4. Press End key. Confirmation message will appear. 5. Press Y key. BIOS setup will terminate and the computer will be rebooted. Procedure Refer to the TOSHIBA Password Utility Chapter 6, Power and Power-Up Keyboard. Procedure Check that the numeric keypad overlay is not selected.

  • Page 154: Internal Lcd Display Panel

    Internal LCD display panel Apparent LCD problems may be related to the computer’s setup. Refer to Chapter 7, Problem No display Markings appear on the LCD screen. Problems above remain unresolved or other problems occur Hard disk drive Problem Computer does not boot from hard disk drive Slow performance...
  • Page 155 CD-ROM drive Problem You cannot access a CD in the drive Some CDs run correctly, but others do User’s Manual Procedure Make sure the drive’s disc tray is securely closed. Press gently until it clicks into place. Check whether the drive power is on. If the power is off, click on the optical disk drive icon in the task tray and turn on the power.
  • Page 156 DVD-ROM drive Problem You cannot access a CD/DVD in the drive Some CD/DVDs run correctly, but others do 9-10 Procedure Make sure the drive’s disc tray is securely closed. Press gently until it clicks into place. Check whether the drive power is on. If the power is off, click on the optical disk drive icon in the task tray and turn on the power.
  • Page 157 DVD-ROM&CD-R/RW drive For more information, refer to Chapter 4, Problem You cannot access a CD/DVD in the drive Some CD/DVDs run correctly, but others do User’s Manual Operating Procedure Make sure the drive’s disc tray is securely closed. Press gently until it clicks into place. Check whether the drive power is on.
  • Page 158 9-12 Procedure If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
  • Page 159 Some CD/DVDs run correctly, but others do USB floppy disk drive For more information, refer to Chapter 4, Problem Drive does not operate There may be a faulty cable connection. Check Some programs run correctly but others do You cannot access the external 3 1/2"...

  • Page 160: Pointing Device

    Device tab. Then click the Detail Setting button and click the Device Select tab. Check that the Touch Pad is not selected. Pressing Fn + F9 to enables TOSHIBA Dual Pointing Device. The system might be busy. If the pointer is shaped as an hourglass, wait for it to return to its normal shape and try again to move it.

  • Page 161: Usb Mouse

    Problem Double-tapping (Touch Pad) does not work USB mouse Problem On-screen pointer does not respond to mouse operation Double-clicking does not work The mouse pointer moves too fast or too slow The mouse pointer moves erratically User’s Manual Procedure Try changing the double-click speed setting in the mouse control utility.

  • Page 162: Usb Device

    USB device Refer also to your USB device’s documentation. Problem USB device does not work Bios Beep Sounds Problem Beep sounds 9-16 Procedure Check for a firm cable connection between the USB ports on the computer and the USB device. Make sure the USB device drivers are properly installed.
  • Page 163 Memory expansion Refer also to Chapter 8, memory modules. Problem If there is a memory malfunction, the power LED flashes (on for 0.5 seconds, off for 0.5 seconds) in the following ways; If there is only an error in Slot A: repeatedly flashes orange twice, then green.
  • Page 164 External monitor Refer also to Chapter 8, documentation. Problem Monitor does not turn No display Display error occurs i.LINK (IEEE1394) device Problem i.LINK device does not function Modem Problem Communication software can’t initialize modem You can hear a dial tone but can’t make a call 9-18 Optional...
  • Page 165 Problem You place a call, but a connection can’t be made After making a call you can’t hear a ring Communication is cut off unexpectedly A CONNECT display is quickly replaced by NO CARRIER Character display becomes garbled during a communication session You cannot receive an...
  • Page 166 Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Problem Cannot access Wireless LAN Bluetooth For more information on wireless communication, refer to Chapter 4, Operating Basics.

  • Page 167: Tv Output Signal

    Problem Computer/printer do not communicate Printer error TV output signal Problem Display on TV is poor No display Disposing of PC and PC batteries ■ Discard this PC in accordance with applicable laws and regulations. For further information, contact your local government. ■...

  • Page 168: Toshiba Support

    All data deletion costs will be borne by you. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.

  • Page 169: Chapter 10 Legal Footnotes

    86°F) or >25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to your PC documentation or visit the Toshiba website at www.pcsupport.toshiba.com for details). User’s Manual...
  • Page 170 Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
  • Page 171 Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode. The screen will dim when the computer is operated on battery power and you may not be able to increase the brightness of the screen.
  • Page 172 Legal Footnotes 10-4 User’s Manual...

  • Page 173: Specifications

    Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Weight (typical) Size Weight and size will vary with other configurations. Above weights are measured at specific criteria. They are not guaranteed as the maximum weight/size of the actual product. Environmental Requirements Conditions Operating...

  • Page 174: Power Requirements

    Power Requirements AC adaptor Computer Built-in Modem Network control unit (NCU) Type of NCU Type of line Type of dialing Control command Monitor function Communication specifications Communication system Communication protocol Communication speed 100-240 volts AC 50 or 60 hertz (cycles per second) 15 VDC 4.0 amperes Telephone line (analog only)
  • Page 175 Transmitting level Receiving level Input/output impedance Error correcting Data compression Power supply User’s Manual -10 dBm -10 to -40 dBm 600 ohms ±30% MNP class 4 and ITU-T V.42 MNP class 5 and ITU-T V.42bis +3.3V (supplied by computer)
  • Page 176 Specifications User’s Manual...

  • Page 177: Appendix B Display Controller And Modes

    Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. ■ 15.4" WXGA, 1280 horizontal × 800 vertical pixels Because of the LCD’s increased resolution, lines may appear broken in DOS mode.
  • Page 178 Video mode Type 0, 1 Text 2, 3 Text 0*, 1* Text 2*, 3* Text 0+, 1+ Text 2+, 3+ Text 4, 5 Grph Grph Text Text Table1 Video modes (VGA) Resolution Character matrix (pels) 40 × 25 8 × 8 Characters 80 ×...
  • Page 179 Table1 Video modes (VGA) continued Video Type Resolution mode Grph Grph Grph Grph Grph Grph Grph User’s Manual Character matrix (pels) 320 × 200 8 × 8 Pels 640 × 200 8 × 8 Pels 640 × 350 8 × 14 Pels 640 ×...
  • Page 180 Table 2 Video modes (WXGA, Intel Resolution LCD colors 640 × 480 256/256K 800 × 600 256/256K 1024 × 768 256/256K 1280 × 800 256/256K 1280 × 1024 256/256K 1600 × 1200 256/256K (Virtual with LCD only) 1920 × 1440 256/256K (Virtual with LCD only)
  • Page 181 Table 2 Video modes (WXGA, Intel Resolution LCD colors 640 × 480 64K/64K 800 × 600 64K/64K 1024 × 768 64K/64K 1280 × 800 64K/64K 1280 × 1024 64K/64K 1600 × 1200 64K/64K (Virtual with LCD only) 1920 × 1440 64K/64K (Virtual with LCD only)
  • Page 182 Table 2 Video modes (WXGA, Intel Resolution LCD colors 640 × 480 16M/16M 800 × 600 16M/16M 1024 × 768 16M/16M 1280 × 800 16M/16M 1280 × 1024 16M/16M 1600 × 1200 16M/16M (Virtual with LCD only) 1920 × 1440 16M/16M (Virtual with LCD only)
  • Page 183 Table 3 Video modes (WXGA, Intel Resolution LCD colors 640 × 480 256/256K 800 × 600 256/256K 1024 × 768 256/256K 1280 × 800 256/256K 1280 × 1024 256/256K 1600 × 1200 256/256K (Virtual with LCD only) 1920 × 1440 256/256K (Virtual with LCD only)
  • Page 184 Table 3 Video modes (WXGA, Intel Resolution LCD colors 640 × 480 64K/64K 800 × 600 64K/64K 1024 × 768 64K/64K 1280 × 800 64K/64K 1280 × 1024 64K/64K 1600 × 1200 64K/64K (Virtual with LCD only) 1920 × 1440 64K/64K (Virtual with LCD only)
  • Page 185 Table 3 Video modes (WXGA, Intel Resolution LCD colors 640 × 480 16M/16M 800 × 600 16M/16M 1024 × 768 16M/16M 1280 × 800 16M/16M 1280 × 1024 16M/16M 1600 × 1200 16M/16M (Virtual with LCD only) 1920 × 1440 16M/16M (Virtual with LCD only)
  • Page 186 Display Controller and Modes B-10 User’s Manual...

  • Page 187: Wireless Lan

    Wireless LAN Card Specifications Form Factor Compatibility Network Operating System Media Access Protocol Data Rate Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless...

  • Page 188: Supported Frequency Sub-Bands

    Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 189 *1 Factory-set default channels *2 Refer to the sheet Approved Countries/Regions for use for the countries/regions that in which these channels can be used. When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point.
  • Page 190 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825 User’s Manual...

  • Page 191: Bluetooth Wireless Technology Interoperability

    Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ■ Bluetooth Specification Ver2.0+EDR, as defined and approved by The Bluetooth Special Interest Group.
  • Page 192 TOSHIBA portable computers. Always use Bluetooth™ Cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe...

  • Page 193: Bluetooth Wireless Technology And Your Health

    Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
  • Page 194 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20cm.

  • Page 195: Using Bluetooth™ Card From Toshiba Equipment In Japan

    3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. User’s Manual...

  • Page 196: Device Authorization

    (1) 2.4: This equipment uses a frequency of 2.4 GHz. (2) FH: This equipment uses FH-SS modulation. (3) 1: The interference range of this equipment is less than 10 m. 3. TOSHIBA Direct PC Monday - Friday : 10:00-17:00 Toll Free Tel...

  • Page 197: Ac Power Cord And Connectors

    AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Wire size:...
  • Page 198 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug configuration must be 6-15P (250V) or 5-15P (125V) as designated in the U.S.
  • Page 199 BIOS and Hard Disk Drive to gain access to the system. To set permission and limits for the TOSHIBA Anti-theft Protection Timer please use the TOSHIBA Password Utility. The settings can only be activated or modified by a user with supervisor authority.
  • Page 200 TOSHIBA Anti-theft Protection Timer User’s Manual...

  • Page 201: If Your Computer Is Stolen

    What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.

  • Page 202: Toshiba Theft Registration

    TOSHIBA Theft Registration Send to: Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Satellite Pro A120) Model number: (e.g. PSAC1E- 005006G3) Serial number: (e.g. 12345678G) Date stolen: Owner’s details Last name, first name: Company: Street: Postal Code/City:...
  • Page 203 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-ReWritable...
  • Page 204 VRT: voltage reduction technology WXGA: wide extended graphics array XGA: extended graphics array AccuPoint: A pointing device integrated into the TOSHIBA computer keyboard. adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
  • Page 205 analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted. Voice communications are analog signals. ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements.
  • Page 206 buffer: The portion of the computer’s memory where data is temporarily stored. Buffers often compensate for differences in the rate of flow from one device to another. bus: An interface for transmission of signals, data or electric power. byte: The representation of a single character. A sequence of eight bits treated as a single unit;...
  • Page 207 commands: Instructions you enter at the terminal keyboard that direct the actions of the computer or its peripheral devices. communications: The means by which a computer transmits and receives data to and from another computer or device. See parallel interface; serial interface.
  • Page 208 DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries. default: The parameter value automatically selected by the system when you or the program do not provide instructions. Also called a preset value.
  • Page 209 (FDD): An electromechanical device that reads and writes to floppy disks. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 210 Fn, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 211 interface: 1) Hardware and/or software components of a system used specifically to connect one system or device to another. 2) To physically connect one system or device to another to exchange information. 3) The point of contact between user, the computer, and the program, for example, the keyboard or a menu.
  • Page 212 LSI: Large Scale Integration. 1) A technology that allows the inclusion of up to 100,000 simple logic gates on a single chip. 2) An integrated circuit that uses large scale integration. main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte.
  • Page 213 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver Utility: A TOSHIBA utility that lets you set the parameters for various power-saving functions. User’s Manual...
  • Page 214 A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. Random Access Memory (RAM): High speed memory within the computer circuitry that can be read or written to.
  • Page 215 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
  • Page 216 volatile memory: Random access memory (RAM) that stores information as long as power is supplied to the computer. warm start: Restarting or resetting a computer without turning it off. window: A portion of the screen that can display its own application, document or dialog box.
  • Page 217 5-5 brightness increase, 5-5 controller, B-1 hinge, 2-9 opening, 3-4 screen, 2-9 DLA for TOSHIBA, 1-15, 4-14 Docking interface, 1-8, 2-7 Documentation list, 1-3 Dual Pointing Device, 1-8 Problems, 9-14 Touch Pad, 1-8, 2-9, 4-1 Touch Pad control buttons, 2-9,...
  • Page 218 Floppy disk care, 4-17 Fn + Ctrl (enhanced keyboard simulation), 5-3 Fn + Enter, 5-3 Fn + Esc (sound mute), 5-3 Fn + F1 (instant security), 5-4 Fn + F10 (Arrow mode), 5-3 Fn + F11 (Numeric mode), 5-3 Fn + F12 (ScrLock), 5-3 Fn + F2 (power save mode), 5-4 Fn + F3 (standby), 5-4 Fn + F4 (hibernation), 5-4...
  • Page 219 LAN, 1-9, 4-26 cable types, 4-26 connecting, 4-26 disconnecting, 4-27 jack, 2-5 LAN active indicator, 2-6 Link indicator, 2-5 problems, 9-19 Media care, 4-17 CD/DVDs, 4-17 floppy disks, 4-17 SD card, 8-5 Memory, 1-4 expansion, 1-16, 8-6 problems, 9-17 Modem, 1-9, 4-19 connecting, 4-21 disconnecting, 4-22 jack, 2-5...
  • Page 220 TOSHIBA Assist, 1-14 TOSHIBA Assist button, 1-11 TOSHIBA ConfigFree, 1-15 TOSHIBA Controls, 1-13 TOSHIBA Mobile Extension, 1-15 TOSHIBA PC Diagnostic Tool, 1-14 TOSHIBA Power Saver, 1-13 TOSHIBA Presentation button, 1-11 TOSHIBA SD Memory Boot Utility, 1-14 TOSHIBA Theft Registration, G-4...

This manual is also suitable for:

Satellite pro a120-107Satellite pro a120-140Satellite pro a120-10kSatellite pro a120-146Satellite pro a120-159Satellite pro a120-160 ... Show all

Table of Contents