Epson ET-2700 - All-In-Ones Printer Quick Installation Guide

Start Here

Read these instructions before using your product.

Unpack

Note: Do not open the ink bottles until you are ready to fill the ink tanks. The ink bottles are vacuum packed to maintain reliability.

1. Remove all protective materials from the product.
   
2. Lift up the scanner unit. Remove all protective materials from inside the product.
   

Do not touch the flat white cable or the ink tubes and their translucent cover.

Fill ink tanks

Note: This product requires careful handling of ink. If ink spills, wipe it off immediately with a damp towel to avoid permanent stains. If ink gets on your clothes or belongings, it may not come off.

Keep the ink bottles out of the reach of children and do not drink the ink.

1. Open the ink tank cover, then open the cap for the ink tank you are going to fill.
   
2. Unpack one of the ink bottles. Hold the ink bottle upright and slowly turn the bottle cap to remove it.
   

Do not shake or squeeze the ink bottles. Do not touch the top of the ink bottle after its cap is removed.

3. Position the top of the ink bottle along the slot in front of the filling port, then slowly stand the bottle up to insert it.
   
   Note: Refer to the color-coded sticker to identify the color of each tank. Do not force the bottles into position; they are keyed for each color.
4. Wait for the ink to fill the tank. Do not squeeze the bottle. Ink flows into the tank and stops automatically when the ink is filled to the upper line.
   Note: If ink does not flow from the bottle, lift and reinsert the bottle.
   
5. When the ink tank is full, remove the ink bottle and securely close the ink tank cap. Place the remaining ink aside; you will need it later.
   
   Note: Replace the bottle cap and tighten it.
6. Repeat the previous steps for the other colors.
7. Close the ink tank cover and then the scanner unit.
   
8. Connect the power cord to the back of the product and to an electrical outlet.
   
   Caution: Do not connect to your computer yet.
9. Press the power button to turn on the product.
   Note: If all lights are flashing, turn off the product and check that no protective material has been left inside the product.
10. Press and hold the stop button for 3 seconds until the power light starts to blink and ink charging begins. Ink charging takes about 10 minutes. When the power light stops blinking, ink charging is complete.
    
    
    Do not turn off the product, raise the scanner unit, or load paper while the product is charging or you'll waste ink.
    
    Note: After some ink is used for charging, the rest is available for printing.
11. To complete filling the ink tanks, repeat steps 1 through 6 using the remaining ink in the bottles.
    Note: Replace the bottle cap before disposing of the bottles.
12. Close the ink tank cover and scanner unit.

Load paper

See the online User's Guide for information about loading capacity and available paper types and sizes.

1. Make sure the product is not charging. Then flip the feeder guard forward, raise the paper support, and tilt it backwards slightly.
   
2. Slide the edge guide all the way out.
   
3. Load paper, glossy or printable side up and short edge first, in the middle of the rear paper feed slot.
   
4. Slide the edge guide against the paper, but not too tightly.
   
5. Pull out the output tray.
   

Install software

Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is required to obtain the product software.

To print from a Chromebook™, go to www.epson.com/support/gcp (U.S.) or www.epson.ca/support/gcp (Canada) for instructions.

1. Make sure the product is NOT CONNECTED to your computer.
   Windows^®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable.
   
2. Insert the product CD or download and run your product's software package: www.epson.com/support/et2700 (U.S.) or www.epson.ca/support/et2700 (Canada)
3. Follow the instructions on the computer screen to run the setup program.
4. When you see the Select Your Connection screen, select one of the following:

• Wireless connection
  In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password.
• Direct USB connection
  Make sure you have a USB cable (not included).

Mobile printing

Connect wirelessly from your smartphone, tablet, or computer. Print documents and photos from across the room or around the world:

• Print directly from a smartphone or tablet using iOS or Android with Epson iPrint™. Simply connect your printer and device to the same network and tap the action icon to select the print option.
• Use Epson Print Enabler (free from Google Play™) with Android™ devices (v4.4 or later). Then connect your printer and device to the same network and tap the menu icon to select the print option.
• Print remotely with Epson Connect™ and Google Cloud Print™. See your online User's Guide for instructions or learn more at www.epson.com/connect (U.S.) or www.epson.ca/connect (Canada).

Any problems

Network setup was unsuccessful.

• Make sure you select the right network name (SSID).
• Restart your router (turn it off and then on), then try to connect to it again.
• The printer can only connect to a network that supports 2.4 GHz connections. If your router offers both 2.4 GHz and 5 GHz connections, make sure 2.4 GHz is enabled.
• If you see a firewall alert message, click Unblock or Allow to let setup continue.

There are lines or incorrect colors in my printouts.
Run a nozzle check to see if there are any clogged nozzles. Then clean the print head, if necessary. See the online User's Guide for more information.

Setup is unable to find my product after connecting it with a USB cable.
Make sure your product is on and securely connected as shown:

Any questions

Quick Guide
Basic information, troubleshooting, and limited warranty.

User's Guide
Windows: Click the icon on your desktop or Apps screen to access the online User's Guide.
Mac: Click the icon in Applications/Epson Software/Guide to access the online User's Guide.
If you don't have a User's Guide icon, go to the Epson website, as described below.

Technical support

Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product to download drivers, view manuals, get FAQs, or contact Epson.

Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 am to 8 pm Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Recycling

Epson offers a recycling program for end of life hardware and ink bottles. Please go to www.epson.com/recycle (U.S.) or www.epson.ca/recycle (Canada) for information on how to return your products for proper disposal.

Need paper and ink?
Ensure peak performance and brilliant results with Genuine Epson^® Ink and specialty papers, engineered specifically for Epson printers. Find Genuine Epson Ink and specialty papers at www.epson.com (U.S. sales) or www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766).


Epson printers, ink and speciality papers.

ET-2700 replacement inks

Color	Part number
Black	502
Cyan	502
Magenta	502
Yellow	502