Sharp SMD2489ES Installation Manual
Microwave drawer oven
Hide thumbs
Also See for SMD2489ES:
- Operation manual (28 pages) ,
- Wi-fi connect manual (8 pages) ,
- Installation manual (8 pages)
Table of Contents
Advertisement
Quick Links
Sharp Microwave Drawer
SPECIAL WARNING
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE this installation manual FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CLEARANCES AND DIMENSIONS
For SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the stated
clearances and dimensions on pages 2 - 5. See Figures 1 - 7.
UNPACKING YOUR MICROWAVE DRAWER
• Remove a l l pa ck i ng
materials from inside the
Microwave Drawer. DO
NOT R EMOVE THE
WAVEGUIDE COVER,
which is located on the
top of the Microwave
Drawer.
• Remove the feature stick-
er, if there is one. Check
the drawer for any dam-
age, such as misaligned
or bent drawer, damaged
drawer seals and seal-
ing surfaces, broken or
loose Microwave Drawer
guides and dents inside
the cavity or on the front side of the drawer. If there is any damage,
do not operate the Microwave Drawer and contact your dealer or
a SHARP AUTHORIZED SERVICER.
IMPORTANT NOTES TO THE INSTALLER
• Read all of the Installation Manual before installing the
Microwave Drawer.
• Remove all packing material before connecting the electrical
supply.
• Observe all governing codes and ordinances.
• Be sure to leave these instructions with the consumer.
INSTALLATION MANUAL
Sealing
Surface
Waveguide
Cover
Oven: SMD2489ES, SMD2479JS
™
IMPORTANT NOTES TO THE CONSUMER
Keep this manual with your Operation Manual for future reference.
• As when using any microwave oven generating heat, there are
certain safety precautions you should follow. These are listed
in the Operation Manual. Read all and follow carefully.
• Be sure your Microwave Drawer is installed and grounded
properly by a qualified installer or service technician.
• This unit comes equipped with a Wi-Fi connectivity option.
In order to activate the Wi-Fi functionality, the area in which
the unit is installed requires a Wi-Fi signal. Please see the
operation manual for the minimum Wi-Fi specifications.
Sealing
Surface
IMPORTANT SAFETY INSTRUCTIONS
Oven
Cavity
exactly, a fire or electrical shock may result that could cause property
damage, personal injury or death.
must be secured by a properly installed Anti-Tip block.
• This Microwave Drawer must be electrically grounded in
accordance with local codes.
• Make sure the wall coverings and the cabinets around the
Microwave Drawer can withstand the heat generated by the
Microwave Drawer.
TENDED IN THE AREA WHERE A MICROWAVE DRAWER
IS IN USE. NEVER LEAVE THE DRAWER OPEN WHEN THE
MICROWAVE IS UNATTENDED.
DRAWER MAY RESULT IN SERIOUS INJURIES AND CAN
ALSO CAUSE DAMAGE TO THE MICROWAVE DRAWER.
• Do not use the Microwave Drawer as a storage space. This
creates a potentially hazardous situation.
• Check that the time-of-day is in the display. If not, touch STOP/
CLEAR for safety reasons and to prevent unintended use.
1
1
If the information in this manual is not followed
To reduce the risk of tipping, the Microwave Drawer
NEVER LEAVE CHILDREN ALONE OR UNAT-
STEPPING, LEANING OR SITTING ON THE
Advertisement
Table of Contents
Related Manuals for Sharp SMD2489ES
Summary of Contents for Sharp SMD2489ES
- Page 1 Sharp Microwave Drawer Oven: SMD2489ES, SMD2479JS ™ INSTALLATION MANUAL SPECIAL WARNING INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER. IMPORTANT: SAVE this installation manual FOR LOCAL ELECTRICAL INSPECTOR’S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. CLEARANCES AND DIMENSIONS For SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the stated clearances and dimensions on pages 2 - 5.
-
Page 2: Clearances And Dimensions
O. 24" (609.60 mm) bottom of Anti-Tip block cord access hole in cabinet should be a minimum 1 " diameter hole cabinet minimum and deburred of all sharp edges. I. Allow " (22.22 mm) P. 15 " (395.29 mm) overlap... - Page 3 Figure 3 represents a typical standard cabinet. If installed in Move oven location downward for custom cabinets with extended countertops, take into account extended countertops visibility and access to controls. See Figure 4. Extended countertops Figure 4 Figure 3 A. 25" (635 mm) E.
- Page 4 24" MICROWAVE DRAWER FLUSH MOUNT AND MEASUREMENTS Prepare cabinet opening as shown in Figures 5, 6, 7 A. 6" (152.40 mm) B. Suggested electrical outlet location C. Anti-Tip block D. 5" (127 mm) E. 3 " (88.90 mm) F. 4" (101.60 mm) G.
-
Page 5: Anti-Tip Block
ANTI-TIP BLOCK GROUNDING INSTRUCTIONS This appliance must be grounded. The Microwave Drawer is NORMAL INSTALLATION STEPS equipped with a 48" cord having a grounding wire with a ANTI-TIP BLOCK INSTALLATION INSTRUCTIONS grounding plug. It must be plugged into a wall receptacle that is To reduce the risk of tipping of the drawer, the Anti-Tip block must properly installed and grounded in accordance with the National be properly installed located 14... -
Page 6: Model And Serial Number Location
CARE, CLEANING AND MAINTENANCE Refer to the warranty in your Operation Manual for Sharp’s toll-free service number and address. Please call or write if you Refer to the Operation Manual for cleaning instructions. - Page 8 100 Paragon Drive, Montvale, NJ 07645, USA • 1-800-BE-SHARP (237-4277) TINSEB 572MR R1...