Page 1
UHF Radio Kit Installation Guide Introduction The DXI-RADIO kits allows the Toro DXi irrigation controller to communicate with the Central via UHF radio. This document illustrates how to mount the radio kit in the following DXi base models: • DXI-PWM08 •...
Page 2
Connect the BNC from the cover Reattach the cover and secure Connect antenna’s cable to to the radio port. with screws and standoffs if necessary. BNC connector on cover. Antenna Installation To install a UHF antenna for the DXi: 4. The UHF radio uses the same frequency as the base radio.
Page 3
FCC & IC Label It is important to keep track of what wireless devices are installed in your DXi controller. Each DXi controller ships with a label showing important information such as Model number, Serial number, UL certification, and more Depending on the enclosure, this label might be found on the interior side of the enclosure door •...