Table of Contents
Advertisement
Quick Links
22in Recycler
Model No. 20337HD—Serial No. 404320000 and Up
Introduction
This rotary-blade, walk-behind lawn mower is intended
to be used by residential homeowners. It is designed
primarily for cutting grass on well-maintained lawns on
residential properties. Using this product for purposes
other than its intended use could prove dangerous to
you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Figure 1
Figure 1
Register at www.Toro.com.
Lawn Mower
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
The enclosed engine owner's manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
Gross or Net Torque: The gross or net torque
of this engine was laboratory rated by the engine
manufacturer in accordance with the Society of
Automotive Engineers (SAE) J1940 or J2723. As
configured to meet safety, emission, and operating
requirements, the actual engine torque on this class
of mower will be significantly lower. Please refer to
the engine manufacturer's information included with
the machine.
g282707
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Form No. 3423-291 Rev A
Operator's Manual
Figure 2
Safety-alert symbol
WARNING
CALIFORNIA
Proposition 65 Warning
Original Instructions (EN)
All Rights Reserved *3423-291* A
Printed in Mexico
g000502
Advertisement
Table of Contents
Related Manuals for Toro Recycler 20337HD
Summary of Contents for Toro Recycler 20337HD
-
Page 1: Introduction
Authorized Service The enclosed engine owner's manual is supplied Dealer or Toro Customer Service and have the model for information regarding the US Environmental and serial numbers of your product ready. -
Page 2: Table Of Contents
Contents Safety Introduction ............... 1 This machine has been designed in accordance with Safety ............... 2 ANSI B71.1-2017. General Safety ........... 2 Safety and Instructional Decals ......3 General Safety Setup ................ 4 1 Assembling and Unfolding the Handle....4 This product is capable of amputating hands and 2 Installing the Recoil-Starter Rope in the feet and of throwing objects. -
Page 3: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decaloemmarkt Manufacturer's Mark 1. This mark indicates that the blade is identified as a part from the original machine manufacturer. -
Page 4: Setup
Setup Important: Remove and discard the protective plastic sheet that covers the engine and any other plastic or wrapping on the machine. Assembling and Unfolding the Handle No Parts Required Procedure Note: Ensure that the cables are routed on the outside of the handle and are not pinched (D of Figure g236451 Figure 3... -
Page 5: Installing The Recoil-Starter Rope In The Rope Guide
Installing the Recoil-Starter Rope in the Rope Guide No Parts Required Procedure Important: To start the engine safely and easily whenever you use the machine, install the recoil-starter rope in the rope guide. g230719 Figure 4... -
Page 6: Filling The Engine With Oil
Filling the Engine with Oil No Parts Required Procedure Important: Your machine does not come with oil in the engine, but it does come with a bottle of oil. Before starting the engine, fill the engine with oil. g235721 Figure 5 Assembling the Grass Bag No Parts Required Procedure... -
Page 7: Product Overview
Product Overview Operation Note: Determine the left and right sides of the machine from the normal operating position. Before Operation Before Operation Safety General Safety • Always shut off the machine, wait for all moving parts to stop, and allow the machine to cool before adjusting, servicing, cleaning, or storing it. -
Page 8: Filling The Fuel Tank
– Avoid prolonged breathing of vapors. Fill the fuel tank with fresh unleaded regular gasoline from a major name-brand service station (Figure – Keep your hands and face away from the nozzle and the fuel-tank opening. Important: To reduce starting problems, add fuel stabilizer/conditioner to fresh fuel as directed by –... -
Page 9: Adjusting The Handle Height
Adjusting the Handle Height You can raise or lower the handle in 1 of 2 positions that is more comfortable for you (Figure 11). g269686 Figure 11 Remove both handle knobs. Move the handle to the desired height position. Secure the handle with the previously removed handle knobs. Adjusting the Cutting Height CAUTION If the engine has been running, the muffler will be hot and can severely burn you. -
Page 10: During Operation
Check the grass catcher components and the discharge chute frequently for any wear or • Use your full attention while operating the deterioration and replace them with genuine Toro machine. Do not engage in any activity that parts when necessary. causes distractions; otherwise, injury or property damage may occur. -
Page 11: Shutting Off The Engine
g233423 Figure 14 Note: If the machine does not freely roll backward after self-propelling, stop walking, hold your hands in place, and allow the machine to roll a couple of centimeters (inches) forward to disengage the wheel drive. You can also try reaching just under the upper handle to the metal handle and pushing the machine forward a couple of centimeters (inches). -
Page 12: Bagging The Clippings
Bagging the Clippings Use the grass bag when you want to collect grass and leaf clippings from the lawn. If the side-discharge chute is on the machine, remove it; refer to Removing the Side-Discharge Chute (page 13). If the bag-on-demand lever is in the recycling position, move it to the bagging position; refer to Operating the Bag-on-Demand Lever (page 12). -
Page 13: Side-Discharging The Clippings
bag-on-demand lever from 1 position to another. g024438 Figure 17 1. Clean here Side-Discharging the Clippings Use the side discharge for cutting very tall grass. If the grass bag is on the machine and the bag-on-demand lever is in the Bagging position, move the lever to the Recycling position;... -
Page 14: Operating Tips
• For best performance, install a new blade before the cutting season begins. • Replace the blade when necessary with a Toro replacement blade. Cutting Grass • Cut only about a third of the grass blade at a time. -
Page 15: After Operation
After Operation After Operation Safety General Safety • Always shut off the machine, wait for all moving parts to stop, and allow the machine to cool before adjusting, servicing, cleaning, or storing it. • Clean grass and debris from the machine to help prevent fires. -
Page 16: Folding The Handle
Folding the Handle Insert the carriage bolt (with the bolt head toward the inside) through the handle bracket and the upper hole in the handle end. Ensure that the WARNING square edges of each carriage bolt fits into the upper or lower square hole in its related handle Folding or unfolding the handle improperly bracket (Figure... -
Page 17: Maintenance
• To ensure optimum performance of the machine, Figure 23 use only genuine Toro replacement parts and 1. Spark-plug wire accessories. Replacement parts and accessories made by other manufacturers could be dangerous, and such use could void the product warranty. -
Page 18: Servicing The Air Filter
Servicing the Air Filter Changing the Engine Oil Service Interval: Yearly Service Interval: Yearly Press down on the latch tabs on top of the Note: Run the engine a few minutes before changing air-filter cover (Figure 24). the oil to warm it. Warm oil flows better and carries more contaminants. -
Page 19: Replacing The Blade
Replacing the Blade Service Interval: Yearly Important: You will need a torque wrench to install the blade properly. If you do not have a torque wrench or are uncomfortable performing this procedure, contact an Authorized Service Dealer. Examine the blade whenever you run out of fuel. If the blade is damaged or cracked, replace it immediately. -
Page 20: Adjusting The Self-Propel Drive
Adjusting the Self-Propel Drive For Self-Propel-Drive Models Only Whenever you install a new self-propel cable or if the self-propel drive is out of adjustment, adjust the self-propel drive. Turn the adjustment nut counterclockwise to loosen the cable adjustment (Figure 28). g231390 Figure 28 g269307... -
Page 21: Storage
Preparing the Machine for Storage On the last refueling of the year, add fuel stabilizer (such as Toro Premium Fuel Treatment) to the fuel as directed on the label. Dispose of any unused fuel properly. Recycle it according to local codes or use it in your automobile. - Page 22 Notes:...
- Page 23 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.