Cisco Firepower 1010 Getting Started Manual page 17
Hide thumbs
Also See for Firepower 1010:
- Getting started manual (190 pages) ,
- Hardware installation manual (50 pages) ,
- Getting started (42 pages)
Table of Contents
Advertisement
Firepower Threat Defense Deployment with CDO
Figure 4: Cisco SSO Dashboard
Step 6
Click the authenticator logo to choose Duo Security or Google Authenticator, if you have set up both
authenticators.
• If you already have a user record on an existing tenant, you are logged into that tenant.
• If you already have a user record on several tenants, you will be able to choose which CDO tenant to
• If you do not already have a user record on an existing tenant, you will be able to learn more about CDO
Onboard the Device Using Low-Touch Provisioning and the Serial Number
To onboard a Firepower device to CDO using LTP, you complete this procedure, connect the device to a
network that can reach the internet, and power on the device.
Before you begin
Low-touch provisioning (LTP) is a feature that allows a new factory-shipped Firepower 1010 series device
to be provisioned and configured automatically, eliminating many of the manual tasks involved with onboarding
the device to CDO.
Note
Your device needs to have Version 6.7 or greater installed to use LTP. If you want to use this method to
onboard an FTD device running on an older software version (6.4, 6.5, and 6.6), you need to perform a fresh
installation of the software on that device, not an upgrade.
Procedure
Step 1
In the navigation pane, click Devices & Services and click the blue plus button to Onboard a device.
Step 2
Click on the FTD card.
connect to.
or request a trial account.
Onboard the Device Using Low-Touch Provisioning and the Serial Number
Cisco Firepower 1010 Getting Started Guide
15
Advertisement
Chapters
Table of Contents
