Table of Contents
Advertisement
5.
Place the SATA/SAS/NVMe storage
device into the tray then secure it with
four screws.
6.
Insert the storage tray and storage
device assembly all the way into the
depth of the bay until just a small
fraction of the tray edge protrudes.
When installed, the SATA/SAS/NVMe connector on the storage device connects to the
SATA/SAS/NVMe interface on the backplane.
7.
Push the tray lever until it clicks and
secures the storage tray in place.
The storage tray is correctly placed
when its front edge aligns with the
bay edge.
8.
Repeat steps 1 to 7 to install the other
SATA/SAS/NVMe storage devices.
2-14
Chapter 2: Hardware Information
Advertisement
Table of Contents
