Cisco Nexus 9508 Hardware Installation Manual page 45

Aci-mode switch

Hide thumbs Also See for Nexus 9508:

Table of Contents

Installing a Chassis

Step 3

Power up the power supply as follows:

a) Turn on the power source circuit breaker for both input lines.

Verify that the Input 1 (IN1) and Input 2 (IN2) LEDs light up on the power supply.

b) Turn the power switch on the power supply to ON (labeled 1 on the power supply).

The LEDs flash and then the OK LED turns on (green) in addition to the Input LEDs.

What to do next

You are ready to connect the switch to the network.

Connecting a 3-kW DC Power Supply to a DC Power Source

Cisco Nexus 9508 ACI-Mode Switch Hardware Installation Guide

Table of Contents