Advertisement
1. Height of cut
1. Height of cut
Installation
Note:
If the service cutting unit is used on Model
30411 or 30413, install the Deck Sensor Kit, Part No.
119-5307 on the cutting unit.
1.
Park the machine on a level surface, disengage
the PTO, lower the cutting unit, engage the
parking brake, and set the traction pedal in the
N
position, the PTO switch is O
EUTRAL
2.
Shut off the engine and remove the key from
the switch.
3.
Remove the bolts securing the hydraulic motors
to the cutting unit
106-4250
106-4251
FF
(Figure
1).
decal106-4250
1. Thrown object hazard—keep bystanders away from the
machine.
2. Cutting/dismemberment hazard of hand, mower
blade—stay away from moving parts; keep all guards and
shields in place.
decal106-4251
3. Cutting/dismemberment hazard of foot, mower blade—stay
away from moving parts; keep all guards and shields in
place.
.
1. Hydraulic motor
4.
Lift the motors off the cutting unit and lay them
on a surface that is clean and out of the way.
Note:
2
120-6604
133-8061
Figure 1
2. Mounting bolts
Do not damage aluminium couplers.
decal120-6604
decal133-8061
g011511
Advertisement
