Table of Contents
Advertisement
The electrical circuit of the warning light can be
checked by turning the key to "
warning light should come on for a few seconds,
and then go off.
If the warning light does not come on initially when
the key is turned to "
light remains on, have a Yamaha dealer check the
electrical circuit.
EBU18067
Handlebar switches
1
2
3
1. Light switch "
/
/OFF"
2. Engine stop switch "
/
3. Start switch "
"
" (on). The
" (on), or if the warning
"
EBU18081
Engine stop switch "
Set this switch to "
The engine stop switch controls the ignition and
stops the engine when it is running. Use this
switch to stop the engine in an emergency situa-
tion. The engine will not start or run when this
switch is set to "
EBU18102
Start switch "
"
Push this switch to crank the engine with the start-
er. See the starting instructions on page 6-1 prior
to starting the engine.
EBU18157
Light switch "
Set this switch to "
and the taillight. Set the switch to "
the high beams and the taillight. Set the switch to
"OFF" to turn off all the lights.
ECB00046
NOTICE
Do not use the headlights with the engine
turned off for an extended period of time. The
battery may discharge to the point that the
4-3
/
"
" before starting the engine.
".
/
/OFF"
" to turn on the low beams
" to turn on
4
Advertisement
Table of Contents
Troubleshooting
