Table of Contents
Advertisement
EBU24717
Adjusting the parking brake free play
1. Adjusting bolt
2. Cable length "A"
3. Locknut
8
Cable length "A":
47–51 mm (1.85–2.01 in)
Periodically check the cable length "A" and adjust
if necessary.
1. Release the parking brake by moving the
parking brake lever to the right.
2. Fully loosen the locknut and the adjusting bolt
at the rear brake caliper.
2
3
1
3. Slide the rubber cover back at the brake ca-
ble.
4. Loosen the locknut.
5. Turn the parking brake free play adjusting nut
in direction (a) to increase the cable length,
and in direction (b) to decrease it.
1. Locknut
2. Parking brake free play adjusting nut
3. Rubber cover
TIP
If the cable length cannot be adjusted to specifi-
cation, consult a Yamaha dealer.
6. Tighten the locknut on the brake cable.
7. Slide the rubber cover to its original position.
8-33
(a)
(b)
3
2
1
Advertisement
Table of Contents
Troubleshooting
