Table of Contents
Advertisement
Status LEDs
1
Power
Power supply status:
• Off —Power supply off.
• Green—Power supply on.
3
Active
Status of the failover pair:
• Off— Failover is not operational.
• Green—Failover pair operating normally.
• Amber—When the chassis is in a high
Cisco Firepower 1010 Hardware Installation Guide
10
The LED is green always unless the chassis
in a high availability pair.
availability pair, the LED is amber for the
standby unit.
2
Status
System operating status:
• Off—System has not booted up yet.
• Green, flashing quickly—System is booting
up.
• Green—Normal system function.
• Amber—Critical alarm indicating one or
more of the following:
• Major failure of a hardware or software
component.
• Over-temperature condition.
• Power voltage outside the tolerance
range.
• Green, flashing slowly (twice in 5
seconds)—Cloud connected.
Cisco Defense Orchestrator
Note
(CDO) is valid for FTD 6.7 and
later.
• Green and amber, flashing—Cloud
connection failure.
• Green—Cloud disconnected.
Note
The CDO LED pattern applies to low
touch provisioning (LTP). See the
Firepower Easy Deployment Guide for
Cisco Firepower 1000 or 2100
Firewalls
for more information.
4
Network
Status of the network ports.
Link status (L):
• Off—No link, or port is not in use.
• Green—Link established.
• Green, flashing—Link activity.
Overview
Advertisement
Table of Contents
