Advertisement
Quick Links
ART10*
Disassembly
1
Position the screen vertically.
4
Position the screen horizontally and
disassemble the cable holder screw.
M4L10
1X
7
Press the plug lock, push it in the direction of the arrow,
and then disassemble the screen completely.
※ Do not lift the plug or pull it downward
*MFL718019022307REV00*
2
Push the top of the screen lightly in the
direction of the arrow to disassemble
a part of the cover space.
5
Lower the rear lever and push the bottom
of the screen forward, as shown in the figure.
Plug lock
when disassembling the screen.
※ Caution
Avoid pushing it hard.
There is a risk of damage.
8
Lay the stand on the box packaging, remove the four screws,
and then disassemble the stand bar.
4X
3
Use a wedge or pull it with your hand
to completely disassemble the cover.
6
Lift the screen, separate the top
of the screen, and hold the screen.
Keep the disassembled screen
close to the stand at a distance
of 10 cm or less.
Advertisement
Related Manuals for LG ART10 Series
Summary of Contents for LG ART10 Series
- Page 1 *MFL718019022307REV00* ART10* Disassembly Position the screen vertically. Push the top of the screen lightly in the Use a wedge or pull it with your hand direction of the arrow to disassemble to completely disassemble the cover. a part of the cover space. ※...
- Page 2 27ART10AKPL 1077 ~ 1277 29.9 17.5 Power requirement 19 V 4.0 A 90°...
- Page 3 Installation *MFL718845022201rev01* User Install Guide A Insert the stand base into the styrofoam groove as shown in the gure. B Insert the bar into the hole of the stand base along the groove until it reaches the parting line.
- Page 4 Check the orientation of the power cable and cable holder. Power plug Cable holder Power cable Hold the screen and secure the power plug. Secure the screen to the stand. A Check the position of the power plug on the back cover of the screen. A Insert the stand hook into the back cover groove and tighten while pushing the lower part, as shown in the gure.