Table of Contents
Advertisement
_________________________________________________________________________________________________
10. NOTICES AND COPYRIGHT
12. NOTICES AND COPYRIGHT
NOTICE TO THE USER
Copyright © Cisco Systems Inc. All rights reserved. This manual and the software described
herein shall not, in whole or in part, be reproduced, translated or reduced to any machine-
readable form without the prior written consent of Cisco Systems Inc.
Cisco Systems Inc provides no warranty with regard to this manual, software or other
information contained herein, and hereby expressly disclaims any implied warranties of
merchantability or fitness for any particular purpose with regard to this manual, the software
or such other information. In no event shall Cisco Systems Inc be held liable for any
incidental, consequential or special damages, whether based on tort, contract or otherwise,
arising out of or in connection with this manual, the software or other information contained
herein, or use thereof.
Cisco Systems Inc reserves the right to make any modification to this manual or the
information contained herein at any time, without notice. The software described herein may
also be governed by the terms of a separate end-user license agreement.
Cisco is a registered trademark of Cisco Systems Inc.
MeshWizard, EasyMesh, FMQuadro, FluidThrottle, VOLO, Fluidity, Virtual Gig, ENDO and
MOBI are trademarks of Cisco Systems Inc, Microsoft, Windows, Internet Explorer and
Microsoft Edge are registered trademarks of the Microsoft Corporation in the United States
and/or other countries.
Ethernet is a registered trademark of the Xerox Corporation.
__________________________________________________________________________
© 2021 Cisco and/or its affiliates.
WARNING
Installation of Cisco hardware devices and their
supporting infrastructure must be done by suitably qualified
personnel only. In some countries, installation by a certified
electrician may be required.
Cisco hardware installations must comply with all
applicable local legislation.
WARNING
To avoid danger from non-ionizing radiation and/or electric
shock and/or high-intensity laser or LED light sources, be
sure to install the unit only in a location with restricted
access.
WARNING
To avoid danger from electric shock, do not expose the unit
to water or high humidity if the unit is powered ON, or if any
access covers have been removed from the unit enclosure.
Do not place liquid-filled objects on or above the unit.
All rights reserved
Command-line interface user manual
Page 28 of 37
Advertisement
Table of Contents
