hit counter script
Toshiba B-EX Series Key Operation Specification
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Barcode Reader
  5. B-EX Series
  6. Key operation specification

Toshiba B-EX Series Key Operation Specification

Hide thumbs Also See for B-EX Series:
Table of Contents

Advertisement

Quick Links

Download this manual
TOSHIBA Barcode Printer
B-EX4T3 (B-EX Series OLD menu)
Key Operation Specification
32.0 Edition: Mar. 28, 2022
BS22001600-EN

Advertisement

Table of Contents
loading

Related Manuals for Toshiba B-EX Series

Summary of Contents for Toshiba B-EX Series

  • Page 1 TOSHIBA Barcode Printer B-EX4T3 (B-EX Series OLD menu) Key Operation Specification 32.0 Edition: Mar. 28, 2022 BS22001600-EN...

  • Page 2: Table Of Contents

    Table of Contents Page SCOPE ............................1 OUTLINE ............................1 OPERATION PANEL ........................1 OUTLINE OF EACH MODE ......................2 ONLINE MODE ..........................2 4.1.1 Threshold setting mode ........................2 4.1.2 RFID calibration mode ........................2 4.1.3 Information mode ..........................2 SYSTEM MODE ...........................
  • Page 3 6.10.1 Outline of the Log Data Saving ..................... 28 6.10.2 Conditions ............................. 28 6.10.3 Data to be Saved .......................... 28 6.10.4 Time Required ..........................28 6.10.5 Log Save Operation Example ....................... 29 6.11 LCD MESSAGES AND LED INDICATIONS ................30 DISPLAY PATTERN AND KEY OPERATION FOR SYSTEM MODE AND USER SYSTEM MODE LIST BOX WITH SCROLLBAR ....................
  • Page 4 8.6.9 FACTORY TEST ......................... 119 8.6.10 AUTO PRINT (TRANS.) ......................120 8.6.11 AUTO PRINT (REFL.) ......................... 120 SENSOR ADJUST ........................121 8.7.1 TEMPERATURE ......................... 121 8.7.2 REFLECT ............................ 121 8.7.3 TRANS............................121 8.7.4 PE REFL./TRANS........................122 8.7.5 RIBBON ............................122 RAM CLEAR ..........................
  • Page 5 AUTO CONFIGRATION FILE ....................183 11.3.1 Format ............................183 11.3.2 Model Information ........................183 11.3.3 Display Message ......................... 183 11.3.4 Firmware File to be Downloaded ....................183 POWER SAVING FUNCTION ....................184 Copyright ©2011-2022 Toshiba Tec Corporation All rights reserved...

  • Page 6: Scope

    1 SCOPE This specification describes key operations using both the keys and the LCD of B-EX4T3 and the B-EX4T1/T2/D2 following FW version. B-EX4T1-QM/CN less than C3.2 B-EX4T2 less than C2.0 B-EX4T2-H less than C2.0 B-EX4D2 less than D2.0 2 OUTLINE Key operations are different depending on the printer mode: The online mode in which operations are carried out through the keys and error messages are displayed while the printer is connected to the host such as a PC, and the system mode in which self-diagnosis and setting of various parameters are performed.

  • Page 7: Outline Of Each Mode

    4 OUTLINE OF EACH MODE This chapter describes the outline of each mode supported by the printer. Refer to each chapter for detailed information. 4.1 ONLINE MODE This mode is mainly used by users (operators). The label or tag can be issued in the online mode. When an error occurs, the help function shows its cause, troubleshooting, and the recovery method.

  • Page 8: User System Mode

    4.3 USER SYSTEM MODE The user system mode is accessible from the online mode. This mode is mainly used by users (administrators) or service technicians, and contains the menus which might be frequently changed. In addition to the menus common to the system mode, such as parameter setting, fine adjustment, and BASIC setting, there are LAN/WLAN setting, auto calibration, and a dumping function which enables the printer to dump received data.

  • Page 9: General View Of Key Operation

    5 GENERAL VIEW OF KEY OPERATION [Power OFF] Power on Online mode [FEED] key [Feeds one label] [Online] [RESTART] key [PAUSE] key [Pause] Display Threshold setting mode Hold down the [PAUSE] key for a few seconds. RFID calibration mode Hold down the [ENTER] key for a few seconds.
  • Page 10 <Continued from the previous page.> Download mode Turn the power on while holding down the [FEED], [RESTART] and [PAUSE] keys. System mode Turn the power on while holding down the [FEED] and [PAUSE] keys simultaneously or holding down the [MODE] key. Auto configuration mode Turn the power on while holding down the [CANCEL] key.

  • Page 11: Online Mode

    6 ONLINE MODE 6.1 KEY FUNCTION The printer behavior is not guaranteed when a undefined key is operated. 6.1.1 Online Mode Screen Function [FEED] (1) Feeds and ejects one piece of the media. This is also sed to adjust the media to the proper position. If printing is attempted with the media improperly positioned, print data is not printed at the correct position.

  • Page 12: Help Screen

    6.1.2 Help Screen Function [FEED] (1) Ends the help message screen. [RESTART] (1) Ends the help message screen. [PAUSE] (1) Ends the help message screen. [MODE] (1) Ends the help message screen. [CANCEL] (1) Ends the help message screen. (2) Returns to the previous help page. (3) Ends the help message screen.

  • Page 13: Led Function

    6.2 LED FUNCTION [ONLINE] LED Indicates that the printer is in online state. Flashes when the printer is communicating with the host. Flashes (ON: 250 ms, OFF: 250 ms) in synchronization with the [ERROR] LED when the printer is turned off. Flashes in the power saving mode (ON: 1000 msec., OFF: 1000 msec.) (*2) [ERROR] LED Indicates that the printer is in error state.
  • Page 14 Head open ← Number of remaining labels to print (*2) ← Message ← 1 line of the error message ← 2 line of the error message ← Icon, Help guide (*3) * Whether to display or hide the 1 and 4 lines of the online mode display can be selected in the system mode.

  • Page 15: Icon

    6.4.2 Icon Five kinds of icons are displayed in the bottom line of the online mode screen. These icons are displayed only in the online mode screen. Icon Explanation Wireless LAN icon Displayed and used when the wireless LAN module is installed. ...

  • Page 16: Online Mode Screen Transition And Operation Example

    6.4.3 Online Mode Screen Transition and Operation Example Idling or normal issuing When the [RESTART] key is pressed, When the [PAUSE] key the printer resumes printing if there is is pressed while printing: remaining data to print. Printing is stopped if it is in progress.

  • Page 17: Help Screen

    6.5 HELP SCREEN 6.5.1 Explanation of Help Display When “Help” is displayed at the lower right of the online mode display, pressing the [RIGHT] or [ENTER] key causes the help message to be shown. The help message is displayed on the upper four lines. When the message exceeds four lines, the up and down arrows are shown on the scrollbar on the left, and the hidden lines can be displayed by scrolling down.

  • Page 18: Help Screen Transition And Operation Example

    6.5.2 Help Screen Transition and Operation Example The help screen consists of three pages, which are Help 1, Help 2 and Help 3. Help 1 shows the detail of the error, Help 2 shows a troubleshooting, and Help 3 shows how to recover from the error.

  • Page 19: Manual Threshold Setting

    6.6 MANUAL THRESHOLD SETTING 6.6.1 Outline of Threshold setting When a label stock is printed, the printer automatically corrects the print position by detecting gaps between the labels using a transmissive sensor to maintain a constant print position. However, when pre-printed media stock is used, print positions may not be detected correctly depending on the ink type used for preprints.

  • Page 20: Threshold Setting Operation Example

    6.6.2 Threshold Setting Operation Example [Online mode] 1. Normal state ↓ Press the [PAUSE] key. [Online mode] 2. Pause state ↓ Hold down the [PAUSE] key for 3 seconds. [Threshold setting] Move the cursor with the Media sensor [UP] or [DOWN] key. selection ↓...
  • Page 21 ↓ ↓ [Threshold setting] ↓ Pressing the [LEFT] key ↓ Detail: NG (1) returns the screen to “6b. ↓ Judgment”. ↓ Press the [RIGHT] key. [Threshold setting] The operation is same as Pressing [PAUSE], 8a. Sensor fine that for 8.5.9 reflective [ENTER] [CANCEL] adjustment...
  • Page 22 Details of the result Display example Displayed item Explanation Sensor type The calibration result and the threshold voltage • Peak value are displayed. • Threshold voltage Pressing the [RIGHT] key enables setting a • Baseline voltage threshold fine adjustment value. •...
  • Page 23 (9) While the result of the fine adjusted threshold setting is shown, pressing the [LEFT] key returns the screen to the threshold fine adjustment screen and pressing the [RIGHT] key shows the details of the result. (10) During threshold setting, the media is fed at the same speed with that for the previous issue. (11) Whether the threshold setting succeeded or not can be checked with the following methods.
  • Page 24  Issue command sending 1. While the judgment result is displayed, press the [FEED] key to terminate the threshold setting. → The printer is placed in the pause state. 2. Press the [RESTART] key to clear the pause state. → The printer is placed in the online state. 3.

  • Page 25: Rfid Calibration

    6.7 RFID CALIBRATION Applicable model: B-EX4T1-G/T-QM/CN with firmware version of C1.4 or later The supported RFID module and RFID tag types are as follows: Module: B-EX700-RFID-U4-EU-R Tag: Following tag type only (The others are unusable.) • TSE Web (Supplier: SMARTRAC, Chip: NXP U-Code G2iL) Feed direction Label pitch Label length...

  • Page 26: Outline Of The Rfid Calibration

    6.7.1 Outline of the RFID Calibration The RFID calibration is a function to determine automatically the distance to the optimum write/read position and AGC value required for properly writing/reading data on/from RFID tags. When the result of an RFID calibration is saved (by pressing the [ENTER] key) while the detected values are shown on the screen, the value obtained through the RFID calibration is set for the CALIB.

  • Page 27: Rfid Calibration Operation Example

    6.7.2 RFID Calibration Operation Example Note: Be sure to complete the following items before performing the RFID calibration. 1. Select a usable antenna position in the system mode. (Refer to Section 6.7.1 Outline of the RFID Calibration.) 2. Place the RFID media at the print start position in advance by performing the automatic calibration (<7>AUTO.

  • Page 28: Information Mode

    6.8 INFORMATION MODE 6.8.1 Outline of the Information Mode In the information mode, the total feed amount counted during feeding and printing operations is displayed on the LCD in units of centimeters and inches, and printed on request. The feed amount is counted at the end of feeding or printing, and saved in the non-volatile memory. Tip: The effective range of the feed amount is as follows.

  • Page 29: Information Mode Operation Example

    6.8.2 Information Mode Operation Example [Online mode] 1. Normal state ↓ Press the [PAUSE] key. [Online mode] 2. Pause state ↓ Hold down the [UP] key for 3 seconds. [Information mode] Press the [CANCEL] key Feed amount is returns the screen to 1. displayed.

  • Page 30: Information Mode Print Sample

    6.8.3 Information Mode Print Sample <Print sample 1> B-EX4T1: Max. number of digits: 25 mm, Center-aligned <Applicable model> B-EX4T1-G/T-QM/CN C1.1A 320000000cm Max. number of digits: 25 mm 125984251.9” Effective print width B-EX4T2: Max. number of digits: 25 mm, Left-aligned <Applicable model> B-EX4T2-G/T-QM/CN C1.1 320000000cm Max.
  • Page 31 <Print sample 2> B-EX4T1, B-EX4T3: Max. number of digits: 74 mm, Center-aligned <Applicable model> B-EX4T1-G/T-QM/CN C1.3 or later B-EX4T3 V1.4 B or later TOTAL COUNTER LIST MM-dd-yyyy hh:mm xxxxxxxxxxxxxxxx S/N:zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz PRINTER aaaaaaaaacm bbbbbbbbb.binch Max. number of digits: 74 mm Effective print width B-EX4T2/4D2: Max.

  • Page 32: Job Cancellation

    6.9 JOB CANCELLATION 6.9.1 Outline of the Job Cancellation The [CANCEL] key enables cancellation of subsequent print jobs. Holding down the [CANCEL] key for 3 seconds while the printer is in an error* or pause state causes the printer to start a quick reset and shift to the online mode. As long as the [CANCEL] key is held down, the data in the receive buffer is all discarded.

  • Page 33: Saving Log And Receive Buffer Data

    6.10 SAVING LOG AND RECEIVE BUFFER DATA 6.10.1 Outline of the Log Data Saving By operating the [ENTER] key, the log saving mode which saves log information can be used. When the [ENTER] key is held down for 3 seconds while the printer is in the online mode or a pause state, the printer saves log information and automatically restarts.

  • Page 34: Log Save Operation Example

    Log files are saved. (Nothing happens to the LCD.) ↓ The log file has been saved. After saving the log After saving the log file, the printer automatically B-EX Series Initializing... file, the printer restarts. Release the [ENTER] key at this timing. restarts.

  • Page 35: Lcd Messages And Led Indications

    6.11 LCD MESSAGES AND LED INDICATIONS Acceptance of Restoration by LCD Message Status Request indications the [RESTART] line Printer status and Reset (English) Command ERROR Yes/No LINE Yes/No ● In the online mode  In the online mode ●  ONLINE (Communicating) In the online mode with a ribbon...
  • Page 36  An abnormal condition occurred with the sensor for determining the torque of the ribbon motor. 12 RIBBON ERROR ●   A ribbon jam occurred.  The ribbon has been torn.  The ribbon has not been set. An overflow error has occurred in 13 REWIND FULL ●...
  • Page 37 Initializing DHCP CLIENT. 24 DHCP CLIENT INIT… ● ● * Only when DHCP is enabled RFID WRITE The printer failed in writing data ERROR ● onto the RFID tag after having  retried for the specified times. RFID ERROR The printer cannot communicate ●...
  • Page 38 Note: When there is a command error in received command, up to 42 bytes of error command, starting from the command code, are shown on the 3 and 4 lines of the LCD. (However, [LF] and [NUL] are not displayed. Also, 43 bytes and later are not displayed.) Display example (Example 1) [ESC] PC001;0A00,0300,2,2,A,00,B [LF][NUL]...
  • Page 39 LCD message (2 line) English German French ONLINE ONLINE PRETE HEAD OPEN Kopf offen. TÊTE OUVERTE PAUSE PAUSE PAUSE COMMS ERROR Kommunikations-Fehler ERREURS DE COMMUNICAT PAPER JAM PAPIERSTAU BOURRAGE PAPIER CUTTER ERROR Messer Fehler ERREUR MASSICOT NO PAPER Kein Papier. PAS DE PAPIER NO RIBBON KEIN FARBBAND...
  • Page 40 Dutch Spanish Japanese IN LIJN PREPARADA PRINTKOP OPEN. CABEZAL ABIERTO PAUZE PAUSA COMMUNICATIE FOUT ERROR DE COMUNICACION PAPIER STORING. ATASCO DE PAPEL FOUT SNIJMES ERROR DE CORTADOR GEEN PAPIER SIN PAPEL GEEN LINT SIN CINTA PRINTKOP OPEN. CABEZAL ABIERTO FOUT PRINTKOP ERROR DE CABEZAL PRINTKOP OVERHIT.
  • Page 41 Italian Portuguese Chinese ONLINE On Line PREPARADA Testina Aperta CABECA ABERTA 打印头打开 PAUSA PAUSA 暂停 Errore Seriale ERRO DE COMUNICACAO 通讯错误 Carta inceppata PAPEL ENCRAVADO 卡纸 Errore Taglierina ERRO DE CORTADOR 切刀错误 Manca Carta SEM PAPEL 缺纸 Manca Nastro SEM FITA 无碳带...
  • Page 42 Korean Turkish Polish ONLINE ONLINE 온라인 Kafa açık OTWARTA GŁOWICA. 헤드 열림 PAUSE PAUSE PAUZA İLETİŞİM HATASI BŁĄD COMMS 통신 에러. Kağıt sıkışması ZACIĘCIE PAPIERU 용지 잼 KESİCİ HATASI BŁĄD NOŻA 커터 에러 Kağıt yok BRAK PAPIERU 종이가 없습니다. Ribbon yok BRAK TAŚMY 리본이...

  • Page 43: Display Pattern And Key Operation For System Mode And User System Mode

    7 DISPLAY PATTERN AND KEY OPERATION FOR SYSTEM MODE AND USER SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR The list box is used for displaying the menus or items to be selected. It is comprised of the following. Title Knob Scroll line (up to 4 lines) Scrollbar The knob appears on the scrollbar when the number of scroll lines is over 4 lines.
  • Page 44 Key function (value setting screen) Substitute key Function [MODE] None Returns to the top menu without saving changes. [CANCEL] [FEED] + [RESTART] Returns to the upper-level menu without saving changes. [ENTER] [PAUSE] Saves the changes and returns to the upper-level menu. [UP] [RESTART] Moves the cursor upward.
  • Page 45 Cursor position when shifting from upper-level menu to its sub menu When shifting from upper-level menu to its sub menu, the cursor is positioned at the topmost item except for the RFID setting menu (because the RFID menu items show the setting value). Cursor position when shifting from upper-level menu to its subordinate value setting screen When shifting from upper-level menu to its subordinate value setting screen, the cursor is positioned at the currently selected item.

  • Page 46: Value Setting Display

    7.2 VALUE SETTING DISPLAY The value setting screen is used for setting a value by increasing or decreasing it. It is comprised of the following. Display example Title Setting range Setting value The currently programmable item is highlighted. The display of the symbols like “+” and “-“, and the unit of measure like “mm” and “step” differs depending on the item to be set.
  • Page 47 Key operation (Setting screen with multiple fields (horizontal)) Substitute key Function [MODE] None Returns to the top menu without saving changes. [CANCEL] [FEED] + [RESTART] Returns to the upper-level menu without saving changes. [ENTER] [PAUSE] Saves the changes and returns to the upper-level menu. [UP] [RESTART] Increases the setting value by specified step.

  • Page 48: Information Display

    7.3 INFORMATION DISPLAY The information display is used when no input or setting is performed. It is comprised of the following. Display example Title Information Display Scroll RFID tag read Key function Substitute key Function [MODE] None Displays the top menu. [CANCEL] [FEED] + [RESTART] Displays the upper-level menu.
  • Page 49 Key function (Scroll) Substitute key Function [MODE] None Displays the top menu. [CANCEL] [FEED] + [RESTART] Displays the upper-level menu. [ENTER] [PAUSE] Displays the upper-level menu. [UP] [RESTART] Moves the cursor upward. The cursor does not move any further when it is positioned at the top. [DOWN] [FEED] Moves the cursor downward.

  • Page 50: Sensor Adjustment Display

    7.4 SENSOR ADJUSTMENT DISPLAY The sensor adjustment screen is used only when the level of the sensors on the printer is required to be adjusted. It is comprised of the following. Display example Title Message Sensor level Display Before adjustment After adjustment Key function (before adjustment) Substitute key...
  • Page 51 Key function (after adjustment) Substitute key Function [MODE] None Displays the top menu. [CANCEL] None Displays re-adjustment menu. [ENTER] None Displays the upper-level menu. [UP] None No function [DOWN] None No function [LEFT] None No function [RIGHT] None No function The asterisk “*”...

  • Page 52: Temperature Display Screen

    7.5 TEMPERATURE DISPLAY SCREEN The temperature screen is used only for displaying the print head temperature and ambient temperature. It is comprised of the following. Display example Title Print head temperature Ambient temperature Display Key function Substitute key Function [MODE] None Displays the top menu.

  • Page 53: File Selection Screen

    7.6 FILE SELECTION SCREEN The file selection screen is used for selecting a file when copying data from a USB memory to the printer. It is comprised of the following. Display example Title Scroll bar Scroll lines (4 lines) The scrollbar knob on the file selection screen is not displayed regardless of the number of files. Type of the file selection screens Copy data selection screen CFG file selection screen...

  • Page 54: System Mode

    8 SYSTEM MODE 8.1 OUTLINE OF THE SYSTEM MODE The printer enters the system mode by being turned on using either of the following operations. Holding down the [FEED] and [PAUSE] keys simultaneously. ・ Holding down the [MODE] key. ・ The system mode is intended for performing self-testing and various parameter settings.

  • Page 55: Reflecting The System Mode Settings In The Printer

    DIAG. Performs self diagnosis, prints out the result, checks for the print head broken elements. PARAMETER SET Sets the parameters for each printer function. ADJUST SET Adjusts the printer mechanism position and sensor. TEST PRINT Tests the print quality by printing slant lines, characters and barcodes. SENSOR ADJUST Displays the ambient temaprature and print head temparature, and adjusts each level of the media sensors.

  • Page 56: Diag

    8.3 DIAG The main firmware version is displayed on the right side of the title. Contents of the DIAG. menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <1>DIAG. MAINTENANCE CONT AUTO DIAGNOSTIC HEAD CHECK 7.3 INFORMATION DISPLAY 8.3.1 MAINTENANCE CONT This section describes how to print out the maintenance counter data.
  • Page 57 Menu operation example Display Procedure Turn on the printer while holding down the [FEED] and [PAUSE] keys simultaneously. The SYSTEM MODE screen is displayed. Select <1>DIAG. and press the [ENTER] key. The submenus of [<1>DIAG.] are displayed. Select [MAINTENANCE CONT] and press the [ENTER] key. The submenus of [MAINTENANCE CONT] are displayed.
  • Page 58 8.3.1.1 Counter Parameter Print Contents << COUNTER >> CONTRAST [40] TOTAL FEED 0.0km [QM] SYSTEM PASSWORD [OFF] << STORAGE AREA >> FEED 0.0km TTF AREA 0KB] FEED1 0.0km EXT CHR AREA 0KB] FEED2 0.0km BASIC AREA 0KB] FEED3 0.0km PC SAVE AREA 0KB] FEED4 0.0km...
  • Page 59 Applicable model: B-EX4T2 and B-EX4D2 only Applicable model: B-EX4T1-G/T-QM/CN C1.4 or later Applicable model: B-EX4T1-TS25-R V2.0B or later The display contents vary depending on the model. Model Display contents B-EX4T1-G/T-QM/CN C1.2 or later (RIBBON WIDTH TYPE1) B-EX4T2-G/T-QM/CN C1.2 or later RBN(FW) +0 RBN(FW) +0 B-EX4T2-H-QM/CN C1.1A or later...
  • Page 60 B-EX4T1-G, B-EX4T2-G,B-EX4D2-G: When the power is turned off, the print distance of 8.2 m or less is rounded down when backed up. B-EX4T1-T, B-EX4T2-T: When the power is turned off, the print distance of 5.6 m or less is rounded down when backed up. B-EX4T2-H, B-EX4T3-H: When the power is turned off, the print distance of 2.8 m or less is rounded down when backed up.
  • Page 61 BACK -9.9 mm to +9.9 mm Backfeed fine adjustment TONE (T) -20 to +10 step Print density fine adjustment (Thermal transfer print mode) TONE (D) -20 to +10 step Print density fine adjustment (Direct thermal print mode) RBN (FW) *1 -15 to +10 step Ribbon motor drive voltage fine adjustment (Take-up)
  • Page 62 FW/BK ACT. Forward feed standby MODE1 Stops after 13.7-mm switching action forward feeding. MODE2 Stops after 6-mm Note: Models supporting MODE3: backward feeding B-EX4T1-G/T-QM/CN C1.2 or later 3-mm forward feeding. B-EX4T1-TS25-R V2.1 or later (Only when the cut mode, thermal transfer, and feed gap sensor is selected.) In other cases, the printer stops...
  • Page 63 Back feed follows the ON →ON TRANS. REFLECT printer REFLECT+Bfeed ON REFLECT+Bfeed behavior →ON REFLECT ON ALL+Bfeed Back feed follows the ON ON ALL+Bfeed ALL printer behavior. →ON ALL PEEL OFF MODE Peel-off pre-print operation MODE1 Standard MODE2 Peel-off pre-print Applicable model: B-EX4T3-HS V1.3 operation added or later...
  • Page 64 LBL/RBN END Label end/ribbon end process TYPE1 When a label end or setting ribbon state detected, the printer stops immediately. TYPE2 When a label end or ribbon state detected, the printer prints the current label as far as possible, and then stops. MAXI CODE SPEC.
  • Page 65 C1.4 or before> Resin2 Resin 2 Resin3 (*1) Resin 3 (*1) (*1) “Resin3” shall not be selected for Reserve2 Reserved the B-EX4T1-T (QM/CN) model. Reserve3 Reserved Reserve4 Reserved Reserve5 Reserved Reserve6 Reserved <For B-EX4T1-G/T- QM/CN Semi resin1 Semi resin 1 C1.5 or later>...
  • Page 66 before> Resin2 Resin 2 Reserve1 Reserved Reserve2 Reserved Reserve3 Reserved Reserve4 Reserved Reserve5 Reserved Reserve6 Reserved Reserve7 Reserved Reserve8 Reserved <For B-EX4T2-H C1.1A or Resin1 Resin 1 later> Resin2 Resin 2 Resin3 Resin 3 Reserve1 Reserved Reserve2 Reserved Reserve3 Reserved Reserve4 Reserved Reserve5...
  • Page 67 REFRECT reflective sensor used. TRANS. A transmissive sensor is used. REF-MANUAL1 reflective sensor-1 (manual) is used. REF-MANUAL2 reflective sensor-2 (manual) is used. REF-MANUAL3 reflective sensor-3 (manual) is used. REF-MANUAL4 reflective sensor-4 (manual) is used. REF-MANUAL5 reflective sensor-5 (manual) is used. TRN-MANUAL1 A transmissive sensor-1 (manual) is used.
  • Page 68 Applicable model: B-EX4T1-G/T-QM/CN C1.2 or later, B-EX4T2-G/T-QM/CN C1.2 or later B-EX4T2-H-QM/CN C1.1A or later, B-EX4D2-G-QM/CN D1.1 or later * This parameter is not used for B-EX4D2. If “CN” is selected for the RAM clear destination, the ENERGY TYPE parameter is not displayed. Applicable model: B-EX4T1-G/T-QM/CN C1.5 or later, B-EX4T2-G/T-QM/CN C1.3 or later Applicable model: B-EX4T3-HS V2.1 or later <<...
  • Page 69 38400 38400 bps 115200 115200 bps DATA LENG. Data length 7 bits 8 bits STOP BIT Stop bit length 1 bit 2 bits PARITY Parity NONE None EVEN Even CONTROL Transmission control XON/XOFF XON/XOFF protocol method (No XON output when the power is on, no XOFF output when the power is off) READY/BUSY...
  • Page 70 DHCP CLIENT ID DHCP client ID setting (Hex.) Max. 64 characters DHCP HOST NAME DHCP host name (ASCII) Max. 32 characters WLAN STANDARD Wireless LAN: Standard 11b/g 11b/g WLAN MODE Wireless LAN: Connection INFRASTRUCTURE Infrastructure setting mode ADHOC Adhoc mode ESS ID Wireless LAN: ESS ID Max.
  • Page 71 << RFID >> Item Description Value to be printed MODULE RFID module type NONE No RFID kit installed B-EX700-RFID-H1-QM- B-EX700-RFID-H2-R B-EX700-RFID-U2-EU/U S-R, B-EX700-RFID-U4-R, B-EX700-RFID-U4-EU/U S-R, U4 module preinstall model TAG TYPE RFID tag type NONE I-Code Tag-it C220 ISO15693 C210 C240 C320 EPC C1 Gen2...
  • Page 72 (ACCESS When PASS is selected, the following settings are PASSWORD) subsequently displayed: Password setting to protect error tag detection Enabled OFF: Disabled Automatic unlock function setting Enabled OFF: Disabled CALIB. MODE (*2) RFID calibration mode Disabled Enabled CALIB. AGC (*2) Optimum AGC value obtained 0 to 15 through RFID calibration...

  • Page 73: Auto Diagnostic

    8.3.2 AUTO DIAGNOSTIC The procedure for printing the self-diagnosis result is the same as that for the maintenance counter data. 8.3.1 MAINTENANCE CONT. The following table shows the menu structure from the top menu of the system mode to AUTO DIAGNOSTIC.
  • Page 74 8.3.2.1 Auto Self-Diagnosis Printout <Printout for the models supporting SIO> B-EX4T1-TS25-R V2.0 or later B-EX4T1-G/T C1.1A or later B-EX4T2-G/T C1.1 or later B-EX4T2-H C1.1A or later B-EX4D2-G D1.1 or later PROGRAM B-EX4T1-T PROGRAM B-EX4T3-H MAIN XXXXXXXXX C1.1A:F300 MAIN XXXXXXXXX V1.0A:1A00 BOOT XXXXXXXXX V1.0A :0100 BOOT XXXXXXXXX V1.0 :8500 WMON XXXXXXXXX V1.0 :6100...
  • Page 75 PROGRAM B-EX4T3-H Model name B-EX MAIN 15OCT2010 V1.0A:1A00 Checksum Version Creation date (Day-Month-Year) Name PROGRAM: Program area BOOT 20SEP2010 V1.0:8500 Checksum Version Creation date (Day-Month-Year) Name BOOT: Boot area WMON 25OCT2010 V1.0:6100 Checksum Version Creation date (Day-Month-Year) Name WMON: (WLAN) HTML area FONT ANKCG :AE00 Checksum of ANK font...
  • Page 76 Sensor check details The value of non-installed sensor is unfixed. SENSOR1 0 0 0 0 0 0 0 0 , 0 0 0 0 0 0 0 0 Thermal head open sensor 1: Head closed (When the print head is unlocked, no printing performed.) Thermal head-up sensor 1: Head lowered...
  • Page 77 SENSOR2 [H]20ﾟC [A]22ﾟC Ambient temperature sensor status (0 to 86 °C, --°C if it cannot be detected) Thermal head temperature sensor status (0 to 86 °C) [R]4.2V [T]2.5V [E]2.7V Reflective sensor status for detecting the ribbon end state (0.0 to 5.0 V) Transmissive sensor status (0.0 to 5.0 V) Reflective sensor status (0.0 to 5.0 V) Note: For B-EX4D2, the status of the ribbon end sensor is always 0.0 V.
  • Page 78 LAN MAC 11-22-33-44-55-66 MAC Address for wired LAN Note: A wired LAN MAC address cannot be obtained depending on the combination among the system mode start-up method, whether a wireless LAN board is installed or not, and the LAN setting. In this case, “**- **-**-**-**-**”...
  • Page 79 Internal serial I/F check EX.232C NG OK: Normal data NG: Abnormal data or the loop-back jig is not connected Internal serial interface External serial I/F check (Applicable model: B-EX4T1-TS25-R V2.0 or later, B-EX4T1-G/T C1.1A or later, and B-EX4T2-G/T C1.1 or later) C NG (0111) Bit configuration (x3x2x1x0)
  • Page 80 B-EX700-RFID-U4-R Version LCD message B-EX700-RFID-U4-US-R Version LCD message KR2, CN2 (Use of CN2 is prohibited.) B-EX700-RFID-U4-EU-R Version LCD message U4 module preinstall model (B-EX4T1/EX4T2-GS18/TS18-CN-R) Version LCD message CN2, KR2, (Use of KR2 is prohibited.) Wireless LAN installation check WLAN OK: Installed NG: Not installed or setting of wireless LAN disabled Wireless LAN 00-11-22-33-44-55...
  • Page 81 USB memory installation check USB MEMORY NG OK: Installed NG: Not installed USB memory BASIC program check BASIC M NONE NONE: No program installed Version: Program installed BASIC main program BASIC S NONE NONE: No program installed Version: Program installed BASIC system program...

  • Page 82: Head Check

    8.3.3 HEAD CHECK The print head check procedure is the same as that for the maintenance counter data described in 8.3.1 MAINTENANCE CONT. The following table shows the menu structure from the top menu of the system mode to HEAD CHECK. MENU ITEM Display pattern and key operation SYSTEM MODE...

  • Page 83: Parameter Set

    8.4 PARAMETER SET Contents of the PARAMETER SET menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <2>PARAMETER SET PRINTER SET SOFTWARE SET PANEL PASSWORD 8.4.1 PRINTER SET Contents of the PRINTER SET submenu MENU ITEM Display pattern and key operation SYSTEM MODE...
  • Page 84 In the case the printer cannot detect a gap/black mark while feeding the media, an error occurs on the following condition. Regarding an error during feeding, refer to the External Equipment Interface Specification for the B-EX series, Section 7 Error Processing. When the relation between the programmed media pitch (A) and the media pitch...
  • Page 85 Note: 1. If the pitch of the media used for the previous issue was less than 20 mm, the forward wait will not be activated regardless of the parameter setting. <Supplement> In the case labels with the different pitch (less than 20 mm and 20 mm or longer) are alternately placed in one label roll, the forward feed is not activated for the labels with the pitch of less than 20 mm.
  • Page 86 8.4.1.6 RBN SAVE ・ TAG (Note 2) Enabled (When the head lever is set to the TAG position) ・ LABEL Enabled (When the head lever is set to the Label position) (Note 2) ・ OFF Disabled. ・ TAG2 Enabled (When the head lever is set to the TAG position) (Note 3) ・...
  • Page 87 8.4.1.10 PEEL OFF MODE ・ MODE1 Peel-off operation same as before ・ MODE2 Peel-off pre-print operation added * Applicable Model: B-EX4T3-H V1.3 or later Peel-off pre-print operation for B-EX4T3-H The printer feeds the media forward to the peel-off desk after printing is completed. Then after the media is removed, the printer feeds the media backward to the start position of the next printing.
  • Page 88 feeding). Moreover, when the [PAUSE] key is pressed before the peel-off pre-print operation, the remaining number of labels to be printed may not be displayed. 5. Fine adjustment for backward feeding is not reflected during the peel-off pre-print operation (backward feeding). 6.

  • Page 89: Software Set

    8.4.2 SOFTWARE SET Contents of the SOFTWARE SET menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <2>PARAMETER SET SOFTWARE SET FONT CODE ZERO FONT CODE MANUAL 7.2 VALUE SETTING DISPLAY PEEL OFF STATUS 7.1 LIST BOX WITH SCROLLBAR USB I/F STATUS FEED KEY...
  • Page 90 8.4.2.1 FONT CODE ・ PC-850 ・ PC-852 ・ PC-857 ・ PC-8 ・ PC-851 ・ PC-855 ・ PC-1250 ・ PC-1251 ・ PC-1252 ・ PC-1253 ・ PC-1254 ・ PC-1257 ・ LATIN9 ・ Arabic ・ PC-866 ・ UTF-8 8.4.2.2 ZERO FONT ・ 0 Without slash ・...
  • Page 91 8.4.2.4 MANUAL Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure 0xFF 0x00 Hex. None None ・ CODE1 ・ CODE2 ・ CODE3 8.4.2.5 PEEL OFF STATUS ・ OFF Disabled ・ ON Enabled 8.4.2.6 USB I/F STATUS ・...
  • Page 92 8.4.2.9 EURO CODE Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure 0xFF 0x20 Hex. None None 8.4.2.10 AUTO HD CHK ・ OFF Disabled ・ ON Enabled 8.4.2.11 WEB PRINTER ・ OFF Disabled ・ ON INT Enabled (Internal memory used) ・...
  • Page 93 8.4.2.14 LBL/RBN END ・ TYPE1 When a label end or ribbon end status is detected, the printer stops immediately. ・ TYPE2 When a label end or ribbon end status is detected, the printer prints the current label as far as possible, then stops. TYPE1: When a label end or ribbon end is detected in the middle of printing, printing is immediately stopped.
  • Page 94 The mode specified by the command may be different from the actual one, depending on the status of this parameter. Also, the data transmission method differs partly. For details, refer to the B-EX Series External Equipment Interface Specification 8.4.2.16 XML ・...
  • Page 95 8.4.2.17 THRESHOLD SELECT ・ REFLECT Selects the threshold value for the reflective sensor. ・ TRANS. Selects the threshold value for the transmissive sensor. * For B-EX4T3-HS V2.1 or later, this setting is disregarded since this is carried out by means of the sensor setting in ISSUE CONTROL (refer to Section 9.11).
  • Page 96 8.4.2.18.1 TRANSFER <B-EX4T1-G/T-QM/CN C1.4 or before> ・ Semi resin1 Semi-resin 1 ・ Semi resin2 Semi-resin 2 ・ Resin1 Resin 1 ・ Resin2 Resin 2 ・ Resin3 Resin 3 (“Resin3” is not usable for the B-EX4T1-T model.) ・ Reserve2 to Reserve6 Reserved <B-EX4T1-G/T-QM/CN C1.5 or later>...
  • Page 97 <B-EX4T2-G/T C1.3 or later> ・ Wax1 Wax 1 ・ Wax2 Wax 2 ・ Semi resin1 Semi-resin 1 ・ Semi resin2 Semi-resin 2 ・ Resin1 Resin 1 ・ Wax3 Wax 3 ・ Semi resin3 Semi resin 3 ・ Resin2 Resin 2 ・...
  • Page 98 8.4.2.20 RIBBON WIDTH ・ TYPE1 ・ TYPE2 Applicable model: B-EX4T1-G/T-QM/CN C1.2 or later, B-EX4T2-G/T-QM/CN C1.2 or later, B-EX4T2-H-QM/CN C1.1A or later, and B-EX4D2-G-QM/CN D1.1 or later * This parameter is not used for B-EX4D2-G. 8.4.2.21 REPRT AFTER ERR ・ ON ・...

  • Page 99: Panel

    8.4.3 PANEL Contents of the PANEL menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <2>PARAMETER SET PANEL LCD LANGUAGE LCDISPLAY MACHINE NAME PRINT PAGE IP ADDRESS CONTRAST 7.2 VALUE SETTING DISPLAY 8.4.3.1 LCD LANGUAGE ・...

  • Page 100: Password

    8.4.3.5 CONTRAST Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure Decimal None Enabled None ・ + (Plus) Higher contrast ・ - (Minus) Lower contrast 8.4.4 PASSWORD Contents of the PASSWORD menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR...
  • Page 101 8.4.4.1 System mode and user system mode start screen when password is enabled When the password is enabled, the password entry screen is displayed at the time the system mode or user system mode is started. Password entry for the system mode Display Procedure Turn on the printer while holding down the [FEED] and [RESTART] keys...

  • Page 102: Adjust Set

    8.5 ADJUST SET Contents of the ADJUST SET menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <3>ADJUST SET FEED ADJ. 7.2 VALUE SETTING DISPLAY CUT ADJ. BACK ADJ. X ADJUST TONE ADJ. (TRANS.) TONE ADJ.

  • Page 103: Feed Adj

    8.5.1 FEED ADJ. Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure 50.0 -50.0 Decimal Exist None +0.0 mm Print start One label position +3.0 mm Print start One label position -3.0 mm Paper feed direction One label Print start position Note:...

  • Page 104: Cut Adj

    8.5.2 CUT ADJ Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure 50.0 -50.0 Decimal Exist None +0.0 mm Cut position +3.0 mm Cut position -3.0 mm Cut position Paper feed direction [Procedure for labels having a label pitch of less than 25.4 mm when the disc cutter is used] The minimum label pitch of a label which can be cut in normal use is 25.4 mm.
  • Page 105 Note: 1. If the bottom edge of the last label advances past the feed roller while the print head is lifted during label feeding to cut, the sensor may not be able to detect an error even if the label cannot be fed any more. 2.
  • Page 106 (b) Operation example Issue count: 2, Cut interval: 1 Cut position Head position ▼ ▼ (1) Idling (2) Completes printing the first label (A). (3) Feeds the label to the cut position, then cuts the gap in front of label (A). (4) Back feeds to the home position.
  • Page 107 [Procedure for label having less than the minimum label pitch for each issue speed when the rotary cutter is used] When the following conditions are all met, the cut operation for the last label to be cut is performed as follows. Forward feed to the cut position →...
  • Page 108 [Strip position fine adjustment] 0.0 mm +3.0 mm -3.0 mm 4 mm Printing in the strip issue mode is stopped at the position where the distance from the middle point of the gap 3 mm between labels to the end of the strip shaft is 4 mm, since the gap between labels is assumed to be 2 mm.

  • Page 109: Back Adj

    8.5.3 BACK ADJ. Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure -9.9 Decimal Exist None +0.0 mm Print start position (Home position after backward feeding) +3.0 mm Print start position (Home position after backward feeding) -3.0 mm Print start position (Home position after backward feeding)

  • Page 110: Adjust

    8.5.4 X ADJUST Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure 99.5 -99.5 Decimal Exist None X Y Z – 8.5.5 TONE ADJ. (TRANS.) Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit...

  • Page 111: Rbn Adj.

    8.5.7 RBN ADJ.<FW> The reference section depends on the model. Reference Applicable model 8.5.7.1 RBN ADJ.<FW> Other than below B-EX4T1-G/T-QM/CN C1.2 or later 8.5.7.2 RBN ADJ.<FW> B-EX4T2-G/T-QM/CN C1.2 or later 8.5.7.2.1 TYPE1 B-EX4T2-H-QM/CN C1.1A or later 8.5.7.2.2 TYPE2 B-EX4D2-G-QM/CN D1.1 or later Note: This parameter is not used for B-EX4D2-G.

  • Page 112: Rbn Adj.

    8.5.7.2.2 TYPE2 Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure Decimal Exist None Step The fine adjustment value is not effective for the reverse rotation. The fine adjustment value for the ribbon take-up motor is limited depending on the print speed. Print speed 6 ips or slower 8 ips...

  • Page 113: Threshold

    8.5.8.2 RBN ADJ.<BK> 8.5.8.2.1 TYPE1 Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure Decimal Exist None Step The fine adjustment value is not effective for the reverse rotation. All fine adjustment values are applicable to every print speed. 8.5.8.2.2 TYPE2 Max.

  • Page 114: Hddwnadj

    Fine adjustment of the head-down timing is required to be performed with @080 command, not through key operations on the printer. (For the @008 command, refer to External Equipment Interface Specification for the B-EX series.) The factory default is 0 msec. and the adjustment value will not be initialized by a RAM clearing.

  • Page 115: Test Print

    8.6 TEST PRINT Contents of the TEST PRINT menu (For the models other than B-EX4T3-H) MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <4>TEST PRINT PRINT CONDITION ISSUE COUNT PRINT SPEED SENSOR PRINT TYPE ISSUE TYPE LABEL PITCH 7.2 VALUE SETTING DISPLAY...

  • Page 116: Print Condition

    8.6.1 PRINT CONDITION This menu enables setting print conditions for test printing. 8.6.1.1ISSUE COUNT ・ 1 ・ 3 ・ 5 ・ 10 ・ 50 ・ 100 ・ 500 ・ 1000 ・ 5000 8.6.1.2 PRINT SPEED Selectable printer speed differs depending on the resolution. B-EX4T TYPE 1 B-EX4T TYPE 2 B-EX6T...
  • Page 117 8.6.1.4 PRINT TYPE ・ TRANSFER ・ DIRECT 8.6.1.5 ISSUE TYPE ・ NO CUT ・ WITH CUT ・ PEEL OFF 8.6.1.6 LABEL PITCH Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure 999 (*1) Decimal None None 500 (*2)
  • Page 118 • For B-EX4T1-G, specifying less than 15.0-mm pitch label for 3 ips print speed or less than 30.0-mm pitch label for 6 ips, printing is performed without cut. • For B-EX4T1-T, specifying less than 15.0-mm pitch label for 3 ips print speed, less than 25.0-mm pitch label for 5 ips, or less than 38.0-mm pitch label for 8 ips, printing is performed without cut.

  • Page 119: Slant Line (1Dot) (Not Supported By B-Ex4T3-H)

    8.6.2 SLANT LINE (1DOT) (Not supported by B-EX4T3-H) 1-dot slant line Magnification of slant line 1-dot slant line (Black area ratio: 16.7%)

  • Page 120: Slant Line (3Dot)

    8.6.3 SLANT LINE (3DOT) 3-dot slant line Magnification of slant line 3-dot slant line (Black area ratio: 16.7%)

  • Page 121: Slant Line (4Dot) (B-Ex4T3-H Only)

    8.6.4 SLANT LINE (4DOT) (B-EX4T3-H only) 4-dot slant line Magnification of slant line 4-dot slant line (Black area ratio: 16.7%)

  • Page 122: Slant Line (7Dot) (B-Ex4T3-H Only)

    8.6.5 SLANT LINE (7DOT) (B-EX4T3-H only) 7-dot slant line Magnification of slant line 7-dot slant line (Black area ratio: 16.7%)

  • Page 123: Characters

    8.6.6 CHARACTERS Gothic + Mincho Gothic + Chinese...

  • Page 124: Barcode

    8.6.7 BARCODE 8.6.8 NON-PRINTING The printer feeds blank labels. 8.6.9 FACTORY TEST...

  • Page 125: Auto Print (Trans.)

    8.6.10 AUTO PRINT (TRANS.) The factory test printing is performed on the following conditions. The parameter settings and the print density fine adjustment value are ignored. After each test pattern is printed, the factory test printing is performed when the [ENTER] key (or its •...

  • Page 126: Sensor Adjust

    8.7 SENSOR ADJUST Contents of the SENSOR ADJUST menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <<5>SENSOR ADJUST TEMPERATURE 7.5 TEMPERATURE DISPLAY REFLECT 7.4 SENSOR ADJUSTMENT DISPLAY TRANS. PE REFL./TRANS. RIBBON 8.7.1 TEMPERATURE The ambient temperature and print head temperature are displayed.

  • Page 127: Pe Refl./Trans

    8.7.4 PE REFL./TRANS. The paper end level of the transmissive sensor and the reflective sensor is registered. Remove any media from the media sensor. The display of the currently detected value is updated every 200 msec. Hold down the [ENTER] key for 3 seconds or more. When the registration of “paper end level”...

  • Page 128: Ram Clear

    8.8 RAM CLEAR Contents of the RAM CLEAR menu <B-EX4T1, B-EX4T2, B-EX4T3> MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <6>RAM CLEAR NO RAM CLEAR MAINTE.CNT CLEAR ALL COUNTER FEED PRINT OTHER PARAMETER CLEAR QM TYPE JA TYPE CN TYPE...

  • Page 129: Mainte.cnt Clear

    8.8.2 MAINTE.CNT CLEAR The maintenance counter, including label distance covered, is cleared. Initial value after maintenance counter clear Item Initial value Label distance covered 0 km Print distance 0 km Cut count Head up/down count Ribbon motor drive time 0 hours Head-up solenoid driver time 0 hours RS-232C hardware error count...
  • Page 130 Back feed Ribbon type B-EX4T2, B-EX4D2 Peel-off pre-print operation B-EX4T1-TS25-R V2.6D or later Cut mode TYPE1 TYPE1 TYPE1 B-EX4T3 V2.0 or later Parameter setting/Software control setting Function Character code PC-850 PC-850 PC-850 0 character type None slash None slash None slash Control code AUTO AUTO...
  • Page 131 B-EX4T2-G/T-QM/CN C1.2 or later B-EX4T2-H-QM/CN C1.1A or later B-EX4D2-G-QM/CN D1.1later Multi label B-EX4T3 V1.4B or later Reprint after error releasing B-EX4T3 V2.1 or later Parameter setting/LCD display Function LCD display language English English English B-EX4T1 before C1.0 Chinese B-EX4T1 C1.0 or later B-EX4T2 B-EX4D2 LCD detail display: model...
  • Page 132 Manual 4 1.0 V 1.0 V Manual 5 1.0 V 1.0 V Transmissive sensor 1.4 V 1.4 V 1.4 V Other than B-EX4T3-H Transmissive sensor B-EX4T3-H Manual 1 1.4 V 1.4 V Manual 2 1.4 V 1.4 V Manual 3 1.4 V 1.4 V Manual 4...
  • Page 133 INTERFACE setting: USB Function USB serial ID INTERFACE setting: RS-232C Function Communication speed 9600bps 9600bps 9600bps Data length 8bit 8bit 8bit Stop bit 1bit 1bit 1bit Parity NONE NONE NONE Flow control XON+READY AUTO XON+READY AUTO XON+READY AUTO INTERFACE setting: Centro Function ACK/BYSY TYPE1...
  • Page 134 AGC value Read/write position +0.0 mm +0.0 mm Antenna position Not cleared Not cleared RFID write success label issue Not cleared Not cleared Not cleared number RFID write failure label issue Not cleared Not cleared Not cleared number *1. Applicable model: B-EX4T1-G/T-QM/CN C1.4 or later *2.
  • Page 135 Issue control Function Sensor Command Command Command Mode Command Command Command Print speed Command Command Command Ribbon Command Command Command Direction Command Command Command Auto status Command Command Command Applicable model: B-EX4T3-HS V2.1 or later...

  • Page 136: Interface

    8.9 INTERFACE Contents of the INTERFACE menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <7>INTERFACE NETWORK LAN/WLAN SNMP SETTING RS-232C CENTRO. 8.9.1 NETWORK Structure of the NETWORK menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <7>INTERFACE...
  • Page 137 8.9.1.3 SETTING MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <7>INTERFACE NETWORK SETTING BASIC INFORMATION 7.3 INFORMATION DISPLAY IP ADDRESS 7.2 VALUE SETTING DISPLAY GATEWAY ADDRESS SUBNET MASK SOCKET PORT 7.1 LIST BOX WITH SCROLLBAR PORT NUMBER 7.2 VALUE SETTING DISPLAY DHCP...
  • Page 138 8.9.1.3.5 SOCKET PORT ・ OFF ・ ON 8.9.1.3.6 PORT NUMBER A socket port number is displayed and set. 8.9.1.3.7 DHCP ・ OFF ・ ON 8.9.1.3.8 DHCP CLIENT ID ・ ASCII A DHCP client ID is entered with ASCII code. ・ HEX A DHCP client ID is entered with hex.
  • Page 139 8.9.1.3.11 WLAN MODE Combination between the wireless LAN connection mode and authentication ADHOC OPEN WEP40 WEP104 INFRA OPEN WEP40 WEP104 SHARED WEP40 WEP104 802.1x OPEN WEP40 WEP104 TTLS WEP40 WEP104 LEAP WEP40 WEP104 PEAP WEP40 WEP104 WEP40 WEP104 EAP-FAST WEP40 WEP104 SHARED EAP-MD5...
  • Page 140 8.9.1.3.12 DEFAULT KEY Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure Decimal None None None 8.9.1.3.13 802.11b CHANNEL Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure Decimal None None...

  • Page 141: Usb

    8.9.1.3.18 WINS ADDRESS WINS Address is displayed and set. 8.9.1.3.19 LPR ・ OFF ・ ON 8.9.2 USB Structure of the USB menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <7>INTERFACE 8.9.2.1 USB SERIAL ID ・...

  • Page 142: Rs-232C

    8.9.3 RS-232C Structure of the RS-232C menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <7>INTERFACE RS-232C SPEED DATA LENGTH STOP BIT PARITY CONTROL 8.9.3.1 SPEED ・ 2400 bps ・ 4800 bps ・ 9600 bps ・...

  • Page 143: Centro

    8.9.4 CENTRO. Structure of the CENTRO. menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <7>INTERFACE CENTRO. ACK/BUSY INPUT PRIME PLUG & PLAY 8.9.4.1 ACK/BUSY ・ TYPE1 ・ TYPE2 8.9.4.2 INPUT PRIME ・ OFF ・...

  • Page 144: Basic

    8.10 BASIC Contents of the BASIC menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <8>BASIC BASIC FILE MAINTENANCE 7.3 INFORMATION DISPLAY TRACE 7.1 LIST BOX WITH SCROLLBAR EXPAND MODE 8.10.1 BASIC ・ OFF ・...

  • Page 145: For Factory

    8.11 FOR FACTORY Contents of the FOR FACTORY menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <9>FOR FACTORY HEAD UP ADJUST PANEL TEST KEY TEST 8.11.1 HEAD UP ADJUST The head-up solenoid is turned on for 10 seconds. 8.11.2 PANEL TEST The test is performed in the following order.

  • Page 146: Key Test

    ONLINE LED turns on. ERROR LED turns on. Backlight turns on. A 1-dot check pattern is displayed. The upper left corner dot is white. Press any key. Character display test ONLINE LED turns on. ERROR LED turns on. Backlight turns on. Characters are displayed.
  • Page 147 PAUSE KEY PRESS TEST Press the [PAUSE] key. UP KEY PRESS TEST Press the [UP] key. RIGHT KEY PRESS TEST Press the [RIGHT] key. DOWN KEY PRESS TEST Press the [DOWN] key. LEFT KEY PRESS TEST Press the [LEFT] key. MODE KEY PRESS TEST Press the [MODE] key.

  • Page 148: Rfid

    8.12 RFID Contents of the RFID menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <10>RFID TEST ID READ 7.3 INFORMATION DISPLAY MODULE 7.1 LIST BOX WITH SCROLLBAR MODULE TYPE COUNTRY RF CHANNEL RETRY ADJ RETRY POSITION 7.2 VALUE SETTING DISPLAY ISSUE RETRY LABELS...
  • Page 149 8.12.1.1 ID READ The printer enters the read test mode, and a read test is performed each time the [ENTER] key is pressed. When the data of a tag can be read, it is displayed on the LCD. When the read test failed, the following message is displayed on the LCD. Error message Error description MODULE TYPE ERROR...

  • Page 150: Module

    8.12.2 MODULE The following information related to the module setting is displayed. ・ MODULE TYPE ・ COUNTRY ・ TAG ・ RF CHANNEL 8.12.2.1 MODULE TYPE ・ NONE No RFID module is installed. ・ H1 B-EX700-RFID-H1-QM-R ・ H2 B-EX700-RFID-H2-R ・ U2 B-EX700-RFID-U2-EU-R (Europe, India) B-EX700-RFID-U2-US-R (North America, Australia, Taiwan, Korea) B-EX700-RFID-U4-R (Japan)

  • Page 151: Retry

    8.12.2.3 TAG Selectable tag types vary according to the module setting. The number in the table indicates the scroll line number. NONE U2 (*1) NONE I-Code Tag-It C220 ISO15693 C210 C240 C320 EPC C1 Gen2 *1: U4 and U4 module preinstall models are included. 8.12.2.4 RF CHANNEL A channel used for RFID tag write is set.
  • Page 152 8.12.3.1 ADJ RETRY POSITION If writing data on a tag failed, the printer feeds the RFID tag forward or backward for specified length, in order to retry data writing. When “0” is set for this parameter, this function and retrying are not performed.

  • Page 153: Uhf Setting

    8.12.3.4 WRITE RETRY The number of times tag write is retried and the timeout for write retry are set. The printer retries to write data onto an RFID tag for up to specified number of times. If the timeout period expired before the maximum number of retries have been done, the printer stops the retries at the time.
  • Page 154 8.12.4.2 Q VALUE This is effective only for B-EX700-RFID-U2-EU/US-R, B-EX700-RFID-U4-R, B-EX700-RFID-U4-EU/US-R, U4 module preinstall model (B-EX4T1/EX4T2-GS18/TS18-CN-R). In the case multiple RFID tags are read at the same time, this menu is useful to focus on a target tag. Set the Q value to “1” or greater (2 is recommended) with the [UP] or [DOWN] key. Q value “0” causes the tags to interfere with each other and disables proper data write.
  • Page 155 Max. Min. value Step Display Sign Integer Decimal 0-padding Unit of value digit place measure Decimal None None None 8.12.4.5 WRITE RETRY MIN AGC This is effective only for B-EX700-RFID-U2-EU/US-R, B-EX700-RFID-U4-R, B-EX700-RFID-U4-EU/US-R, U4 module preinstall model (B-EX4T1/EX4T2-GS18/TS18-CN-R). When the Q value is set to “1” or greater, the AGC threshold lower limit for retrying becomes effective. Even if a tag’s gain is lower than the AGC threshold for data writing, a data writing to the tag may be successful in a retry if the gain is greater than the lower limit.
  • Page 156 POSITION parameter before writing/reading RFID tag. Therefore, @003 command’s parameters “a” and “bbbb” become invalid. (For details of the @003 command, refer to the External Equipment Interface Specification for the B-EX Series.) When the values obtained by an RFID calibration are set, this parameter will automatically turn ON.

  • Page 157: Other

    8.12.4.9 ANTENNA POSITION ・ FRONT … Reserved ・ CENTER … Reserved ・ REAR This parameter, used for an RFID calibration, is to select the combinational position of the RF antenna and the wave director. A “usable” antenna position must be selected for this parameter. Otherwise, the printer operation is not guaranteed.
  • Page 158 To prevent unauthorized changes of the setting, a password can be set to protect the error tag detection setting. Display Operation When the TAG CHECK parameter is set to ON (ACCESS PASSWORD)”, an entry of the password is requested. The following explanation is for when protected password is enabled. Enter the default password “0000”...
  • Page 159 8.12.5.3 HEADUP ACTION This function is used for setting the head-up action during backward feeding of an RFID tag. ・ MODE1 Whether the print head is raised or not is determined depending on the system mode setting (RBN SAVE) or command (issue command, feed command, or reverse feed command).
  • Page 160 8.12.5.4 CARRIER SENSE The printer enters the carrier sense mode, and performs a carrier sense. Environmental radio wave of each channel is picked up for about 30 times during 5 seconds. (This function is enabled only when B-EX700-RFID-U4-R is used.) Display example Display ・...

  • Page 161: Rtc

    8.13 RTC Contents of the RTC menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <11>RTC DATE TIME 7.2 VALUE SETTING DISPLAY BATTERY CHECK 7.1 LIST BOX WITH SCROLLBAR RENEWAL 8.13.1 DATE TIME This setting is effective only when the optional RTC module is installed. Date and time are set.

  • Page 162: Emulation Mode

    8.14 EMULATION MODE Contents of the EMULATION menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <12>EMULATION MODE AUTO DETECT ON AUTO DETECT OFF Z MODE ON Z MODE ON SET D MODE ON This menu is displayed only when the destination is other than JA.
  • Page 163 The result of mode determination for each control character is as follows. Control character Result 0x01 D Mode 0x02 D Mode 0x25, 0x30, 0x31 D Mode 0x25, 0x30, 0x32 D Mode ^（Other than ^01/^02） 0x5E Z Mode 0x5E, 0x30, 0x31 D Mode 0x5E, 0x30, 0x32 D Mode...

  • Page 164: Usb Memory

    8.15 USB MEMORY The following table shows the error messages and descriptions which may be displayed while a USB memory is used. After the error message is displayed, the operation is not retried. Message Description FORMAT ERROR Format error or no memory installed Check the settings.

  • Page 165: Usb To Printer

    8.15.1 USB TO PRINTER ・ COPIED DATA ・ CONFIG FILE The data stored in a USB memory is copied to the printer. • COPIED DATA File (*.DAT) containing firmware (BOOT/MAIN/ CG/KANJI/HTML), storage area information, and parameter settings The file is created in binary format when “PRINTER TO USB” is executed. •...

  • Page 166: Printer To Usb

    8.15.2 PRINTER TO USB ・ ALL The firmware (BOOT/MAIN/CG/KANJI/HTML), storage area information, and parameter settings are copied to a USB memory. When an item to be saved is selected, the confirmation screen is shown and the data is stored in the USB memory.

  • Page 167: Reset

    8.16 RESET Contents of the RESET menu MENU ITEM Display pattern and key operation SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <14>RESET The printer is reset.

  • Page 168: User System Mode

    9 USER SYSTEM MODE 9.1 OUTLINE OF USER SYSTEM MODE The printer enters the user system mode when the following operation is performed from the online state. ・ Press the [PAUSE] key to place the printer in a pause state, then hold down the [RESTART] key for a few seconds.

  • Page 169: Reset

    9.2 RESET Same as 8.16 RESET of the system mode. Contents of the RESET menu MENU ITEM Display pattern and key operation USER SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <1>RESET 9.3 PARAMETER SET Same as 8.4 PARAMETER SET of the system mode. Contents of the PARAMETER SET menu MENU ITEM Display pattern and key operation...

  • Page 170: Lan/Wlan

    9.5 LAN/WLAN Contents of the LAN/WLAN menu MENU ITEM Display pattern and key operation USER SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <4>LAN/WLAN LAN/WLAN SNMP 9.5.1 LAN/WLAN ・ OFF ・ ON (AUTO) ・ ON (LAN) ・ ON (WLAN) The printer status differs depending on whether the wireless LAN module is installed or not. LAN connection Wired LAN Wireless LAN...

  • Page 171: Basic

    9.6 BASIC Same as 8.10 BASICof the system mode. Contents of the BASIC menu MENU ITEM Display pattern and key operation USER SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <5>BASIC BASIC FILE MAINTENANCE 7.3 INFORMATION DISPLAY TRACE 7.1 LIST BOX WITH SCROLLBAR EXPAND MODE 9.7 EMULATION MODE Same as 8.14 EMULATION MODE of the system mode.

  • Page 172: Auto Calib

    9.8 AUTO CALIB Contents of the AUTO CALIB menu MENU ITEM Display pattern and key operation USER SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <7>AUTO CALIB AUTO CALIB ・ OFF ・ ON TRANS. ・ ON REFLECT ・ ON ALL ・ ON TRANS.+Bfeed Note: Since the head-up function is not provided to B-EX4T2-G/T/H, B-EX4T3-H and B-EX4D2-G, the setting and the printer behavior will automatically be changed to “ON TRANS.”...
  • Page 173 4. When the auto calibration with the transmissive sensor is selected, the highest voltage detected by the transmissive sensor is considered as a gap level. After subtracting the threshold fine adjustment value from this voltage, the result will be stored as a threshold. 5.

  • Page 174: Dump Mode

    9.9 DUMP MODE Contents of the DUMP MODE menu MENU ITEM Display pattern and key operation USER SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <8>DUMP MODE BUFFER DUMP LIST USB MEMORY 7.3 INFORMATION DISPLAY PRINT 9.9.1 BUFFER ・ RS-232C RS-232C receive buffer ・...
  • Page 175 9.9.2.2 PRINT ・ ON DEMAND Prints 166 lines of data (approx. 50 cm), then stops displaying “Printing…”. Pressing the [CANCEL] key causes the printing to stop and the display to return to the upper-level menu. Pressing the [ENTER] key (or any other key than the [CANCEL] key) restarts printing.
  • Page 176 Size of the receive buffer B-EX4T1, B-EX4T2, B-EX4D2 RS-232C: 1 MB (Max. 65536 lines) Centronics: 1 MB (Max. 65536 lines) Network I/F: 1 MB (Max. 65536 lines) BASIC1: 8 KB (Max. 512 lines) BASIC2: 8 KB (Max. 512 lines) USB: 1 MB (Max.

  • Page 177: Log

    9.10 LOG Contents of the LOG menu MENU ITEM Display pattern and key operation USER SYSTEM MODE 7.1 LIST BOX WITH SCROLLBAR <9>LOG PRINTER TO USB 9.10.1 PRINTER TO USB Print logs are saved in a USB memory. When the print logs are saved in the USB memory, a file is automatically created in it and named in the following formatted based on the printer model and saved data.
  • Page 178 Hour (00 to 24) Minute (00 to 59) Second (00 to 59) Detailed status For details, refer to Section 8 Status Response in the B-EX Series External Equipment Interface Specification. Status type (Fixed to 2: Automatic status transmission) CCCC Remaining labels to print (0000 to 9999) <CASE 2>...
  • Page 179 Note: In the case the printer information, which was obtained with the parameter setting menu of the B-EX Setting Tool, is updated, a reboot of the printer will be prompted when the printer is restored to the online mode. As the print log is cleared when the printer is rebooted, the parameter settings should not be updated before saving the print log.
  • Page 180 Print Log Size Print logs are stored in two files in the RAM, and they are unified into one when they are saved in a USB memory. The maximum log size of each file in the RAM is 10 KB. If the log size exceeds 10 KB, the oldest file will be erased to create a new file.

  • Page 181: Issue Control

    9.11 ISSUE CONTROL Applicable model: B-EX4T3-HS V2.1 or later 1. Sensor ・ COMMAND ・ NO ・ REFLECTIVE ・ TRANSMISSIVE ・ TR.Threshold1 ・ TR.Threshold2 ・ TR.Threshold3 ・ TR.Threshold4 ・ TR.Threshold5 ・ RE.Threshold1 ・ RE.Threshold2 ・ RE.Threshold3 ・ RE.Threshold4 ・ RE.Threshold5 Note: This setting is disabled when the auto calibration setting is enabled.
  • Page 182 5. Direction ・ COMMAND ・ BOTTOM ・ TOP ・ BOTM/Mir ・ TOP/Mir 6. Auto status ・ COMMAND ・ OFF ・ ON <Explanation> The issue control settings are effective for the TPCL mode only.

  • Page 183: Show Issue Cond

    9.12 SHOW ISSUE COND Applicable model: B-EX4T3-HS V2.1 or later Contents of the SHOW ISSUE COND. menu MENU ITEM <11> SHOW ISSUE COND. Sensor (*1) Mode (*1) Print speed (*1) Ribbon (*1) Direction (*1) Media pitch (*1) Print length (*1) Print width (*1) Media width...
  • Page 184 5. Direction ・ COMMAND ・ BOTTOM ・ TOP ・ BOTM/Mir ・ TOP/Mir 6. Media pitch ・ (***.*)mm Note: “***” indicates the number or space. 7. Print length ・ (***.*)mm Note: “***” indicates the number or space. 8. Print width ・ (***.*)mm Note: “***”...

  • Page 185: Download

    10 DOWNLOAD Power OFF (1) Power off state [FEED] (2) Turn the power on while holding down the [FEED], [RESTART] [RESTART] and [PAUSE] keys simultaneously. [PAUSE] (3) Download mode display Start of download (4) Send a download command. (5) The printer starts receiving data. (6) The printer is receiving the data.
  • Page 186 Note: DOWNLOAD MODE2 is unused. There is no difference in downloading procedure from DOWNLOAD MODE. When an error occurs while downloading data in the download mode, the following error message is displayed. Error message Error message Description Communication error (Command error) The checksum of the boot program does not end with “00”.

  • Page 187: Auto Configuration Mode

    11 AUTO CONFIGURATION MODE 11.1 OUTLINE OF THE AUTO CONFIGURATION MODE When turning on the printer while holding down the [CANCEL] key, the printer starts the auto configuration mode. The auto configuration mode allows for automatically downloading the master firmware and restarting the printer.

  • Page 188: Auto Configration File

    11.3 AUTO CONFIGRATION FILE To execute the auto configuration mode, it is required to create the auto configuration file, which is an exclusive CFG file, in the USB memory in advance. The auto configuration file is stored under the following path under the name of “AUTO CONFIG.CFG”. /ATA0/SYSTEM/AUTOCONFIG.CFG 11.3.1 Format Auto configuration file has the following formats.

  • Page 189: Power Saving Function

    12 POWER SAVING FUNCTION Printer status allowing shift to the power saving mode When the following status continues for a specified length of time, the printer will enter the power saving mode. ONLINE (Idle, communicating) • Pause • Error • Waiting for removal of a label from the media outlet •...
  • Page 190 Message in the power saving mode The supported language differs depending on the printer status before the printer enters the power saving mode. Multi-language Online mode (except for manual threshold setting) Japanese/English System mode, User system mode and manual threshold setting in the online mode Message Display...

This manual is also suitable for:

B-ex4t3B-ex4t1B-ex4t2B-ex4d2B-ex4t1-qmEx4t1-cn ... Show all

Table of Contents