General; Configuration Setup - LG ES96 Series Installation Manual

Hide thumbs Also See for ES96 Series:

Table of Contents

General

Select RCU

• It is a mode to set whether to use Select RCU or not. When set to 'Enable' , You can adjust 'Number of RCU' menu.

Number of RCU

• Number of RCU value range 1~16. (When 'Select RCU' is set to 'Enable')

• Number of RCU value range 0. (When 'Select RCU' is set to 'Disable')

- RCU (Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV.

Please refer to below "How to set Multi IR" (Remote Control)

• How to set Multi IR (Remote Controller)

» 2.1 : When the Mute key is pressed for more than 5 seconds, the LED on the top right of the remote control will blink.

» 2.2 : When LED blinks, press the number you want to set, then press OK key.

» 2-3 : LED will stop blinking.

» 2-4 : If you do not press OK key within one minute, the LED stops blinking and maintains the previously set value.

Splash Offset Time

(Depending on model)

• Set the splash image display time.Number of RCU value range 0. (When 'Select RCU' is set to 'Disable')

• When Splash Offset Time is set to Off, logo(splash image) do not display.

• The time can be set to between 0 and 10 seconds.

Table of Contents