hit counter script
Download
Share
Print this page
Canon CX-G6400 Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. CX-G6400
  6. Manual
Canon CX-G6400 Manual

Canon CX-G6400 Manual

Color card printer
Hide thumbs Also See for CX-G6400:

Advertisement

Quick Links

Download this manual
CX-G6400
COLOR CARD PRINTER
Moving or Transporting the Printer
This manual describes the procedures for moving or transporting the printer. Be sure to read
this manual prior to this operation.
CAUTION:
The printer is not designed to be moved once the inks are installed and the printer is
●
powered on. Moving the printer after this point can cause ink to leak, splash, splatter,
spill, etc. ("leakage"), resulting in injury and/or damage to people and/or property,
including but not limited to re or electrical shock arising from ink coming into contact
with printer components.
If the printer has to be moved, follow the procedures in this manual that describe how
●
to move or transport the printer to help you avoid injury and minimize ink leakage
and/or damage arising from ink leakage. However, these procedures do not guarantee
the ink will not leak and cause injury and/or damage.
●
DISCLAIMER: Canon disclaims all warranties and/or liability for damage caused by ink
leakage resulting from moving or transporting the printer after inks are installed and
the printer is powered on. If you move the printer after inks are installed and the printer
is powered on, you do so at your own risk.
●
Refer to the printer's warranty for additional details.

Advertisement

loading

Related Manuals for Canon CX-G6400

Summary of Contents for Canon CX-G6400

  • Page 1 ● DISCLAIMER: Canon disclaims all warranties and/or liability for damage caused by ink leakage resulting from moving or transporting the printer after inks are installed and the printer is powered on. If you move the printer after inks are installed and the printer is powered on, you do so at your own risk.

  • Page 2: Table Of Contents

    Table of Contents Before You Begin ..................... 1 Moving the Printer Indoors ..............2 Transporting the Printer ................10 Initiating [Preparation for transporting the Printer] from the Printer Driver ..10 Packing the Printer....................18 Installing the Printer ..................23 Installation ....................23 How to Install ...................25 When moving the printer indoors: ●...

  • Page 3: Before You Begin

    Instructions including notes for operation and additional explanations. Sample Screens ■ • The sample CX-G6400 printer driver screens displayed in this manual were created with Windows 10. Trademarks ■ • Canon and the Canon logo are trademarks of Canon Inc.

  • Page 4: Moving The Printer Indoors

    Moving the Printer Indoors When moving the printer on the same floor or to another floor, follow the procedure below. Important • Administrative privileges may be required to configure printer settings. For more details, see "Using Utility Features" in the User's Guide. •...
  • Page 5 Remove the paper from the feeder lift tray, and then close the auxiliary tray. Check the maintenance cartridge warning lamp When the maintenance cartridge warning lamp is lit, replace the maintenance cartridge with a new one. Note • To replace the maintenance cartridge, refer to "Replacing the Maintenance Cartridge" in the User's Guide.
  • Page 6 Open [Devices and Printers]. For Windows 10: Right-click on Start and then select Windows System Tools -> Control Panel -> Hardware and Sound -> Devices and Printers. For Windows 8.1: From the Desktop charms, select Settings -> Control Panel -> Hardware and Sound -> Devices and Printers.
  • Page 7 Click [Yes]. It takes approximately 3 minutes for ink to drain from the printer. Do not operate the printer before the message indicating that [Preparation for Moving the Printer] has completed appears. Important • While ink is being drained, ensure the following precautions to avoid interrupting the procedure. - Do not turn off the printer.
  • Page 8 Check the maintenance cartridge warning lamp. When the maintenance cartridge warning lamp is lit or blinking, replace the maintenance cartridge with a new one. Note • To replace the maintenance cartridge, refer to "Replacing the Maintenance Cartridge" in the User's Guide.
  • Page 9 Turn the power o after you con rm that the printer has stopped. Press the power key for at least 1 second. Important • Do not press the power key after the printer has turned off. Doing so will cause ink to refill in the printer.
  • Page 10 Disconnect the power cord and interface cable. Important • When the power lamp is lit or blinking, do not remove the power plug from the outlet. A printer failure could result. Move the printer. Caution • This product weighs about 25 kg. (55 lbs) With one person standing at the front and another at the back, lift the printer while holding the left and right handles provided at the...
  • Page 11 After moving the printer to its destination, connect the power cord. Warning • Do not use any power cord other than those supplied with the printer. This could cause a fire or electric shock. Turn the printer on.

  • Page 12: Transporting The Printer

    Transporting the Printer When transporting the printer for relocation, moving, etc. over a long distance or by use of a transportation means (airplane, train, automobile, etc.) accompanied by vibrations, be sure to make preparations following the procedure described below. Initiating [Preparation for Transporting the Printer] from the Printer Driver transporting Remove ink from the printer so that ink does not leak during Important...
  • Page 13 Press the tray key to move the feeder lift tray downward. Wait until it stops. Remove the paper from the feeder lift tray, and then close the auxiliary tray.
  • Page 14 Check the maintenance cartridge warning lamp When the maintenance cartridge warning lamp is lit or blinking, replace the maintenance cartridge with a new one. Note • To replace the maintenance cartridge, refer to "Replacing the Maintenance Cartridge" in the User's Guide.
  • Page 15 On the [Utility] tab, click [Preparation for Transporting the Printer]. A confirmation message appears. Click [Yes]. It takes approximately 20 minutes for ink to drain from the printer. Do not operate the printer before the specified message appears in step 8. Important •...
  • Page 16 When the following message appears, remove the ink tanks. Important • If you click [Cancel], [Preparation for Transporting the Printer] will be interrupted. If this occurs, you will need to redo [Preparation for Transporting the Printer] again. Remove all ink tanks as shown in the figure.
  • Page 17 Close the ink tank door. Closing the ink tank door will continue [Preparation for Transporting the Printer] procedure. Do not operate the printer before the message indicating that [Preparation for Transporting the Printer] has completed appears. Check that execution of [Preparation for Transporting the Printer] is completed, click [OK].
  • Page 18 Check the maintenance cartridge warning lamp. When the maintenance cartridge warning lamp is lit or blinking, replace the maintenance cartridge with a new one. Note • To replace the maintenance cartridge, refer to "Replacing the Maintenance Cartridge" in the User's Guide.
  • Page 19 Turn the power o after you con rm that the printer has stopped. Press the power key for at least 1 second. Important • Do not press the power key after the printer has turned off. Doing so will cause ink to refill in the printer.

  • Page 20: Packing The Printer

    Packing the Printer Warning • Before transporting the printer, initiate [Preparation for Transporting the Printer] from the printer driver to drain ink from the printer. Transporting the printer without taking necessary measures can cause ink to leak inside the printer, resulting in fire, electric shock, or machine failure.
  • Page 21 Close the auto stacker. Open the ink tank door, press the upper unit release lever to open the upper unit.
  • Page 22 Install the 4 protectors in the printer. Close the upper unit, then close the ink tank door.
  • Page 23 Set the bottom pads and plastic bag as following gure, and then put the printer on it. Caution • This product weighs about 25 kg. (55 lbs) With one person standing at the front and another at the back, lift the printer while holding the left and right handles provided at the bottom of the printer.
  • Page 24 Put the upper pads, accessory box and outer case as following gure, and then install the 4 xed parts. Important • After packing the printer, do not lift the box or place the box with its upper or side surface down. Ink could leak during transportation.

  • Page 25: Installing The Printer

    Installing the Printer Installation ■ • Make sure that there is sufficient space around the printer. 595 mm (23.4”) 500 mm (19.7”) 500 mm (19.7”) Warning • Do not place the following objects on the printer: - Necklaces and other metal objects - Cups, vases, flowerpots, and other containers filled with water or liquids If such an object is brought into contact with the electrical parts inside the printer, this could cause a fire or electric shock.
  • Page 26 Caution • Do not install the printer in the following locations. This could cause a fire or electric shock. - A damp or dusty location. - A location exposed to oily smoke or steam; e.g., near a countertop or humidifier. - A location exposed to rain or snow.

  • Page 27: How To Install

    How to Install ■ Important • If the printer is carried into a warm room on a cold day, this could cause condensation inside the printer. If this happens, allow the printer to sit for at least 2 hour at room temperature to adapt to the ambient temperature and humidity.
  • Page 28 Lift up the outer case then remove the accessory box and upper pads. Strip the plastic bag from top to bottom.
  • Page 29 Holding the handles at the bottom of Printer, lift Printer to take it out from the package. Caution • This product weighs about 25 kg. (55 lbs) With one person standing at the front and another at the back, lift the printer while holding the left and right handles provided at the bottom of the printer.
  • Page 30 Remove the 4 protectors from the printer. Close the upper unit.
  • Page 31 Open the ink tank cover. Load the ink tank. Insert the ink tank into the ink tank slot with the correct side up. Caution • There are sharp pins in the ink tank slots. To avoid injury, never put your fingers into this area.
  • Page 32 Close the ink tank cover securely. Install all the other ink tanks in the same way according to the color order indicated on the label. Close the ink tank door.
  • Page 33 Connect the power cord to the printer. Warning • Do not use any power cord other than those supplied with the printer. This could cause a fire or electric shock.
  • Page 34 Turn the power on. When the power is turned on, the printer starts the initial setup operation. When the status lamp is blinking, the printer is preparing to print. It will last approximately 25 min. Note • The Initial setup operation is required to prepare the printer for printing. In the initial setup operation, ink is consumed.
  • Page 35 CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. www.usa.canon.com CANON SINGAPORE PTE. LTD. 1 Fusionopolis Place, #14-10 Galaxis, Singapore 138522 Website : asia.canon 4Y8-8175-030 CANON FINETECH NISCA INC. 2019-2021 PRINTED IN JAPAN...