Table of Contents
Advertisement
Quick Links
GP1A173LCS3F
Description
GP1A173LCS3F is a standard, low voltage operation,
OPIC output, transmissive photointerrupter with
opposing emitter and detector in a case, providing
non-contact sensing.
For this family of devices, the emitter and detector are
inserted in a case, and a 3-pin connector is included to
allow remote-mount or off-board designs.
Features
1. Transmissive with OPIC output
2. Highlights :
Special position hooks compatible with 3 different
Plate thicknesses (1.0, 1.2, 1.6mm)
Snap insertion
3. Key Parameters :
Low operating voltage : 2.7 to 5.5V
Gap Width : 5mm
Slit Width (detector side) : 0.5mm
Package : 17 × 12.8 × 8mm (without connector
and hooks)
Connector : Tyco Electronics JAPAN G.K.
(173977-3 and 179228-3)
4. RoHS directive compliant
*"OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and
a signal-processing
Gap : 5.0mm, Slit : 0.5mm,
Low voltage operation,
*OPIC Output, Snap-in type
Compact Transmissive
Photointerrupter with connector
Agency approvals/Compliance
1. Compliant with RoHS directive (2002/95/EC)
Applications
1. General purpose detection of object presence or
motion.
Example : PPC, FAX, Printer
1
GP1A173LCS3F
Sheet No.: OP14021EN
Advertisement
Table of Contents
Summary of Contents for Sharp GP1A173LCS3F
- Page 1 Package : 17 × 12.8 × 8mm (without connector and hooks) Connector : Tyco Electronics JAPAN G.K. (173977-3 and 179228-3) 4. RoHS directive compliant *”OPIC”(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing Sheet No.: OP14021EN...
-
Page 2: Internal Connection Diagram
GP1A173LCS3F Internal Connection Diagram Vout Outline Drawing No. CY15164i02 Unit : 1/1 mm Note) 1. Unspecified tolerance shall be followed the list below. 2. Dimensions in parenthesis are shown for reference. 3. Coupling and contact : CT receptacle connector (173977-3 and 179228-3) by Tyco Electronics Japan G.K. -
Page 3: Absolute Maximum Ratings
GP1A173LCS3F Absolute maximum ratings Ta=25°C Parameter Symbol Rating Unit Remark Supply voltage -0.5 to +6 Output voltage Vout -0.5 to +6 Output transistor between collector and emitter Output current Output transistor collector current *1 Operating temperature Topr -30 to +95 °C... - Page 4 GP1A173LCS3F Fig.1 Output current vs. ambient temperature Sheet No.: OP14021EN...
- Page 5 GP1A173LCS3F Supplements ODS materials This product shall not contain the following materials. Also, the following materials shall not be used in the production process for this product. Materials for ODS : CFC , Halon, Carbon tetrachloride 1.1.1-Trichloroethane (Methyl chloroform) Specified brominated flame retardants Specified brominated flame retardants (PBB and PBDE) are not used in this device at all.
- Page 6 GP1A173LCS3F Notes Truth Table (In case of external addition pull-up resistance to Vout terminal) Light beam Output Interrupted High Uninterrupted Power supply line In order to stabilize power supply line, connect a by-pass capacitor of more than 0.01 F between Vcc and GND near the device.
- Page 7 Unit : 1/1mm (Drawing No. CY15165i06) *1 We recommend to fix GP1A173LCS3F at punching side on the fixing plate (metal plate). *2 Please decide the final dimensions at your side after confirmation by the actual applications, Because mounting efficiency and mounted stabilization are dependent on mounting plate corner-R and punched state.
- Page 8 GP1A173LCS3F Parts This product uses the below parts. Light detector (Quantity : 1) (Using a silicon photodiode as light detecting portion, and a bipolar IC as signal processing circuit.) Maximum sensitivity Sensitivity Response time Type wavelength (nm) wavelength (nm) ( s)
-
Page 9: Packing Specification
GP1A173LCS3F Packing specification Package Name Material Quantity Packing case Corrugated cardboard 1/1000 Corrugated cardboard 6/1000 Tray Polystyrene 1/200 Kraft tape Packing method 1) 5 products are put in 1 pocket. The longer direction of the product is arranged in the arbitrary direction. -
Page 10: Important Notices
SHARP takes no aircraft, trains, automobiles, etc.) responsibility for any problems related to any intellectual --- Traffic signals property right of a third party resulting from the use of SHARP's --- Gas leakage sensor breakers devices. --- Alarm equipment --- Various safety devices, etc.