Canon imageFORMULA R10 - Scanner Setup Guide

Check the included items

There is no need to install any software or scanner driver.

How to Scan

1. Connect the scanner and computer.
   
2. Open the feed tray to turn on the scanner.
   Press the release lever while raising the feed tray
   
   
   Start button lights up blue and the scanner turns on.
3. Open the built in software (CaptureOnTouch Lite).

• A pop-up screen will be displayed with the software icon.
  
  Double-click the [CaptureOnTouch Lite Launcher] icon.
• Pressing the scanner start button does not start CaptureOnTouch Lite.

If CaptureOnTouch Lite does not start, take the following measures.

• Disconnect and reconnect the USB cable.
• If the scanner and computer are connected via a USB hub, remove the USB hub and connect them directly with a USB cable.
• Check whether access to USB devices is prohibited by security software, and allow access if it is prohibited.
• In Windows, AutoPlay for USB memory devices may be off. In that case, open Explorer and run the [CaptureOnTouch Lite] icon in [Devices and drives].

4. Raise the document guide.
   
5. Load the document.
   1. Turn the document upside down with the back side facing you, and load it into the feed tray.
      
   2. Align the document guides with both edges of the loaded document.

• Press the document beneath the tabs of the document guides.
  

6. Select the document type and scanned image storage location.
   

• Clicking allows you to change the scan type and select a location to save your document.
• Clicking [New Document] allows you to add new settings.
• Clicking [New output] allows you to add new storage locations.

7. Click the [SCAN] button.
   

• When the software is open, you can also start scanning with pressing the start button on the scanner.

8. After confirming the scanned image, click the [Finish] button.
   

More Information

For detailed explanations on the scanner and CaptureOnTouch Lite, refer to the user manual.
https://software.canon-elec.co.jp/ims/r10/
The user manual can also be displayed by double-clicking the [manual] icon on the original pop-up screen. See "How to Scan".

• Technical support
  USA
  By internet: www.usa.canon.com/support
  By phone: 1-800-423-2366
  Canada
  By internet: www.canon.ca/support
  By phone: 1-800-OK-CANON (652-2666)

When the Software Update Notice Screen Appears

1. Click the [Yes] button.
   
   The Web browser appears and downloading of the update file begins.
2. Follow the instructions on the screen to install the update.

Tips

• When scanning a card
  Turn the card face up, and insert the card straight into the card slot.
  

Documents / Resources

References

• Software Download Update File : CANON ELECTRONICS INC.
• Canon Support for | Canon U.S.A., Inc.
• Canon Canada Customer Support Home Page

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Canon imageFORMULA R10 - Scanner Setup Guide