Advertisement
Quick Links
thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
Wear protective
instructions
gloves
1. Safety
1.1.
General Safety
warninG! use the cabinet on level and solid ground, preferably concrete. Avoid tarmacadam since the cabinet may sink into the
‰
surface.
locate the cabinet in a suitable working area.
9
Keep the cabinet clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
take care of sharp edges when assembling.
9
do not use the cabinet for any purpose other than that for which it is designed.
8
do not use the cabinet outside.
8
do not get the cabinet wet or use in damp or wet locations or areas where there is condensation.
8
do not clean the cabinet with any solvents which may damage the surfaces.
8
2. introduction
Modular storage system ideal for any garage or workshop. Can be easily adjusted and upgraded to suit specific needs. Purchase a
simple base cabinet or create a custom storage system.
standard features include:
• Ball bearing drawer slides throughout.
• Base cabinets are supplied with a worktop as standard.
• Floor cabinets feature adjustable shelves.
• Each unit is supplied with a lock and two keys.
• Supplied flat packed and will require some simple assembly.
• Two door floor and wall cabinets feature perforated pegboard panels on the inside of the doors.
3. SPecification
model no. ........................................................ APMS85
overall size (W x d x H) .................665 x 305 x 360mm
4. contentS
© Jack sealey limited
instructions for
modular 2 door wall cabinet 665mm
model no:
Wear safety
footwear
Original Language Version
aPmS85
shelf weight limit .................................................... 18kg
cabinet weight limit ................................................ 36kg
APMS85 | Issue 1 08/02/18
Advertisement
Related Manuals for Sealey APMS85
Summary of Contents for Sealey APMS85
- Page 1 Sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Step 1 fit door pivots Step 3 fit side walls fit side supports x 4 Step 2 Step 4 Step 5 fit internal supports. fit cabinet top. Square the cabinet frame. Make sure the measurement from corner to corner are equal before completely tightening the bolts. L1 = L2 Step 6 Original Language Version APMS85 | Issue 1 08/02/18 © Jack sealey limited...
- Page 3 Step 9 drill 12mm holes into the wall. Place expansion screw into the hole, fit washer, spring washer and nut. do the nut up to expand the sleeve. remove nut and washers. fit cabinet, secure washers and nut. ensure the cabinet is securely fixed to the wall. Original Language Version APMS85 | Issue 1 08/02/18 © Jack sealey limited...
- Page 4 Sealey Group, Kempson way, Suffolk business Park, bury St edmunds, Suffolk. iP32 7ar 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk...