Table of Contents
Advertisement
Configuring Port Settings
Step 6
In the Management Details section, type an IP address to identify the SNMP server. SNMPv1, SNMPv2,
and SNMPv3 are supported on your device.
Step 7
Specify the SNMP community string to permit access to the SNMP protocol.
Figure 84: DHCP, NTP, DNS and SNMP Settings
What to do next
Configure port settings.
Configuring Port Settings
Procedure
Step 1
Based on the site profile chosen in the earlier step which is displayed in the left-pane, select the Port Role
from among the following options:
• Uplink – For connecting to devices towards the core of the network.
• Downlink – For connecting to devices further down in the network topology.
• Access – For connecting guest devices that are VLAN-unaware.
Step 2
Choose an option from the Select Switch drop-down list.
Step 3
Make selections from the Available list of interfaces based on how you want to enable them and move them
to the Enabled list.
Catalyst 3850 Switch Hardware Installation Guide
100
Configuring the Switch
OL-26779-05
- Quick Links:
- Table of Contents
- Front Panel
Hide quick links:
Advertisement
Table of Contents
