Table of Contents
Related Manuals for NEC MultiSync M751 IGB
Summary of Contents for NEC MultiSync M751 IGB
- Page 1 User’s Manual M Series InGlass Touch MultiSync ® M751 IGB MultiSync ® M861 IGB Addendum to User’s Manuals of M751 & M861 MONITOR MODEL: M751 IGB, M861 IGB, Please find your model name on the label on rear side of the monitor.
-
Page 2: Table Of Contents
Table of Content Addendum to User’s Manuals of MultiSync M751 & M861………..……..………………...Page 03 Important Information………………………………………………………………………….. Page 04 Recommended Use & Maintenance…………………………………………………………..Page 05 Shipping Content……………………………………………………………………………….. Page 06 Unpacking………………………………………………………………………………………. Page 07 General Installation…………………………………………………………………………….. Page 08 Connections…………………………………………………………………………………..….Page 09 Basic Operation………………………………………………………………………………….Page 11 Troubleshooting………………………………………………………………………………….Page 12 Specifications - MultiSync®... -
Page 3: Addendum To User's Manuals Of Multisync M751 & M861
- Room Light Sensing Sensor: Other than the standard monitor, the M751 IGB & M861 IGB do not allow the monitor to make automatic adjustments to the backlight setting. - NEC ornament logo: Other than the standard monitor, the does not have an ornament logo. Therefore changing the position of the NEC logo is not possible. -
Page 4: Important Information
Connecting to a TV*1 ▪ Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. ▪ The screen of the coaxial cable is intended to be connected to earth in the building installation. -
Page 5: Recommended Use & Maintenance
Recommended Use & Maintenance Recommended Use Ergonomics To realize the maximum ergonomic benefits, we recommend the following: ▪ For optimum performance of the monitor, allow 20 minutes for warming up. Avoid reproduction of still patterns on the monitor for long periods of time to avoid image persistence (after image effects). -
Page 6: Shipping Content
Shipping Content MultiSync® M751 IGB 1. 75” FlatFrog InGlass™ Touch Display – M751 IGB 2. 2x Passive Magnetic Pen 3. Remote Control 4. User Guides / Manuals 5. Addendum to User’s Manuals 6. Power Cable 7. HDMI Cable 8. USB Cable 300 cm MultiSync®... -
Page 7: Unpacking
Unpacking Unpacking the Display Unpack the display (M751 IGB / M861 IGB) from the carton box by removing the white clips on the bottom of the box. NOTE: Due to the weight of the product, for installation and handling 2 people are required. DO NOT start unless you have enough people available. -
Page 8: General Installation
Sharp NEC authorized service person. Failure to follow Sharp NEC standard mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation. -
Page 9: Connections
“TOUCH” and the A type connector to the downstream port on the external computer. 3. Turn on the monitor. *1: Please contact your Sharp NEC customer support for more detailed information. Please contact your Sharp NEC customer support for the setting of the touch panel function in multiple screens. - Page 10 Connections Monitor Setting Select the input signal. ▪ Using SDM slot-PC: Select [OPTION] ▪ Using external computer: Select the input signal which is supplied by the computer connected to USB-connector. NOTE: Please refer to “The touch panel does not respond” in “Troubleshooting” when the touch panel function does not work.
-
Page 11: Basic Operation
Basic Operation Operating range for the Remote Control ▪ Point the top of the remote control toward the monitor’s remote control sensor during button operation. ▪ Use the remote control within a distance of about 3.5 m from the remote control sensor, or at a horizontal and vertical angle of within 30°... -
Page 12: Troubleshooting
Troubleshooting For general instructions on troubleshooting, please refer to standard user’s manual of the base model monitors M751, M861. 1. Slow writing performance Make sure the SDM PC is running UHD resolution with 60Hz. ▪ Switch the monitor to your preferred input source (e.g. HMDI 1, OPTION) using the remote control ▪... - Page 13 Troubleshooting 3. The response of the touch screen is not correct ▪ Avoid direct sunlight or strong light on the screen. ▪ If there are some obstacles near the TOUCH screen, it may malfunction. ▪ Sensor bar module may be dusty or dirty, wipe gently with a soft cloth. ▪...
-
Page 14: Specifications - Multisync® M751 Igb
Specifications – MultiSync® M751 IGB... - Page 15 Specifications – MultiSync® M751 IGB...
-
Page 16: Specifications - Multisync® M861 Igb
Specifications – MultiSync® M751 IGB... - Page 17 Specifications – MultiSync® M861 IGB...
- Page 18 Specifications – MultiSync® M861 IGB...
- Page 19 Specifications – MultiSync® M861 IGB...
-
Page 20: Manufacturer's Recycling And Energy Information
ISO (International Organisation for Standardization) and TCO (Swedish Trades Union). Disposing of your old NEC product The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation of material. - Page 21 For additional information visit: https://www.sharpnecdisplays.us/ (in USA) https://www.sharpnecdisplays.eu/p/hq/en/home.xhtml (in Europe) https://www.sharp-nec-displays.com/global/index.html (Global) WEEE Mark (European Directive 2012/19/EU and amendments) Disposing of your used product: In the European Union EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.