Switch And Module Weights And Quantities; Transceiver And Cable Specifications; Switch Power Input Requirements - Cisco Nexus 9396PX Hardware Installation Manual
Aci-mode switch
Hide thumbs
Also See for Nexus 9396PX:
- Hardware installation manual (76 pages) ,
- Hardware installation manual (68 pages) ,
- Hardware installation manual (74 pages)
Table of Contents
Advertisement
Switch and Module Weights and Quantities
Switch and Module Weights and Quantities
Component
Cisco Nexus 9396PX Chassis (N9K-C9396PX)
Uplink Module
– M6PQ and M6PQ-E
– M12PQ
Fan Modules (fan modules that are currently shipped with the switch).
– Port-side exhaust (blue) (N9K-C9300-FAN2-B)
– Port-side intake (burgundy) (N9K-C9300-FAN2)
Fan Modules (fan modules that were previously shipped with the switch).
– Port-side exhaust (blue) (N9K-C9300-FAN1-B)
– Port-side intake (burgundy) (N9K-C9300-FAN1)
Power Supply module
– 650-W AC port-side exhaust (blue) (N9K-PAC-650W-B)
– 650-W AC port-side intake (burgundy) (N9K-PAC-650W)
– 930-W DC port-side exhaust (gray) (UCS-PSU-6332-DC)
– 930-W DC port-side intake (green) (UCSC-PSU-930WDC)
Transceiver and Cable Specifications
To determine which transceivers, adapters, and cables are supported by this switch, see
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
To see the transceiver specifications and installation information, see
interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
Switch Power Input Requirements
The following table lists the typical amount of power that the switch consumes. It also lists the maximum
amount of power that you must provision for the switch and power supply for peak conditions.
Note
Some power supplies have capabilities that are greater than the maximum power requirements for a switch.
To determine the power consumption characteristics for the switch, use the typical and maximum requirements
that are listed in the following table.
Cisco Nexus 9396PX ACI-Mode Switch Hardware Installation Guide
50
System Specifications
Weight per Unit
22.45 lb (10.2 kg)
—
2.0 lb (0.9 kg)
3.12 lb (1.4 kg)
—
1.14 lb (0.5 kg)
1.14 lb (0.5 kg)
—
0.92 lb (0.4 kg)
0.92 lb (0.4 kg)
—
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
https://www.cisco.com/
https://www.cisco.com/c/en/us/support/
Quantity
1
1
3 (2 for operation
and 1 for
redundancy)
3 (2 for operation
and 1 for
redundancy)
2 (1 for operation
and 1 for
redundancy)
Advertisement
Table of Contents
