Page 2
mportant! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
TECHNICAL DATA CORDLESS LAWN MOWER ALM18B/ALM18BS6 Rated voltage 36 V DC Ingress protection IPX1 Width of cut 46 cm Height of cut 18 - 75 mm Rated input 800 W No load speed 2900/min Weight (without battery and charger) 25.5 kg...
Do not use the product near drop-offs, ditches, excessively reduce the risk of electric shock. steep slopes, or embankments. Poor footing could cause a slip- In case of damage and improper use of the battery, vapour may and-fall accident. be emitted. Provide for fresh air and seek medical help in case of WORK AREA SAFETY complaints.
clear of the discharge opening at all time. job. Use designated handles and restrict working time and exposure. Never pick up or carry the product while it is running. Exposure to noise can cause hearing injury. Wear ear protection Stop the mower motor and remove safety start key, make sure and limit exposure.
After each use, clean the product with a soft dry cloth. Any part that is damaged should be properly repaired or replaced by an authorised service centre. Do not operate on inclines greater than 15°. Mow Check all nuts, bolts and screws at frequent intervals for proper across the face of slopes, never up and down.
avoided, will result in death or serious injury. WARNING avoided, could result in death or serious injury. CAUTION avoided, may result in minor or moderate injury. CAUTION Without safety alert symbol Indicates a situation that may result in property damage. GENERAL MOWING TIPS The run time of the battery depends on the condition, length, and density of the grass.
EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that the product described under “Technical Data” fulfills all the relevant provisions of the directives 2011/65/EU (RoHs), 2014/30/EU, 2006/42/EC, 2000/14/EC, 2005/88/EC, and the following standards have been used: EN 60335-1:2012+A11:2014+A13:2017 EN 60335-2-77:2010 EN ISO 3744:2010 EN 55014-1:2006+A1:2009+A2:2011 EN 55014-2:2015...