D-Link Nuclias Connect DAP-2610 Quick Installation Manual
Ac1300 wave 2 dual band poe access point
Hide thumbs
Also See for Nuclias Connect DAP-2610:
- Manual (87 pages) ,
- Quick installation manual (48 pages) ,
- Quick install manual (11 pages)
Related Manuals for D-Link Nuclias Connect DAP-2610
Summary of Contents for D-Link Nuclias Connect DAP-2610
- Page 1 Quick Installation Guide Nuclias Connect AC1300 Wave 2 Dual Band PoE Access Point DAP-2610 Additional documentation is also available on the D-Link website...
- Page 2 Contents English...
-
Page 3: Before You Begin
Figure 1: Front Panel LED If any of the above items are damaged or Description missing, please contact your local D-Link reseller. Green (Solid) - Device operational Red (Flashing) - Device booting Note: Using a power supply with a different... -
Page 4: Interface Connectors
Manual Configuration Input for the power adapter, however the device can be Power powered over Ethernet. Note: D-Link recommends manually configuring Input Note: An 802.3af PoE injector is not the device before mounting it. The management included in the package contents, computer, DHCP server and DAP-2610 must be but can be purchased separately. - Page 5 Connecting Wirelessly Connect the management computer to the default SSID of the DAP-2610, “dlink”. Manage the access point from a computer. Enter dap2610.local in the address field of your browser. Log in to the administration user interface. The default login information is Username: admin Password: admin Mounting...
- Page 6 Figure 6: Attaching the Mounting Plate Use the included screws to secure the mounting plate to the ceiling brackets. Plug the Ethernet cable into the LAN (PoE) port of the device. Note: If you are powering the device with a power adapter, plug the adapter into the Power Input port.
-
Page 7: Federal Communication Commission Interference Statement
Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 2.62 watts Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant... - Page 8 This device is for indoor use only when using all channels in the 5.15 to 5.25 GHz frequency range. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.
-
Page 9: Technical Support
Install and use the equipment according to the instruction manual. 電波法により5GHz帯は屋内使用に限ります。 Product and Warranty Information To find out more about D-Link Nuclias product or marketing information, please visit the website http://www.dlink.com or https://www.nuclias.com. The D-Link Limited Lifetime Warranty information is available at http://www.dlink.com/warranty VCCI-B dlink.com/support... - Page 10 Notes...
- Page 11 Notes...
- Page 12 Notes...
- Page 13 Notes...
- Page 14 Notes...
- Page 15 Notes...
- Page 16 Notes...
- Page 18 Ver. 2.00(WW)_130x183 2019/12/16...