Sanyo Moonlight RMT-U100 Manual and Code List

TO THE OWNER

Welcome to the World of Sanyo
You made an excellent choice for Performance, Reliability, Value, and Styling.
The RMT-U100 replaces three separate remote controls. This simplifies the operation of your home entertainment system. This remote will operate your Video Cassette Recorder, Television, and Cable Converter Box. Simply program it according to the directions in this owner's manual. Then press the proper function key (VCR, TV, or CABLE) to operate each product.
The Sanyo Universal Remote Control features large glow-inthe-dark basic operating keys. It also has function keys that light when a key is pressed. This indicates the active mode. You never need to wonder which component the remote is controlling. Just observe which mode key lights. That's the answer.
The RMT-U100 universal remote control comes with keys that are preset to operate your Video Cassette Recorder, regardless of the mode you have selected.

BEFORE YOU BEGIN

Installing The Batteries

1. Remove the battery cover by pressing the tab and tilting the cover upward.
2. Install two AA batteries as shown. Be sure to match the / signs on the batteries with the / marks inside the case.

Note: Do Not mix new and used batteries or mix different types of batteries together.

OPERATING KEYS LOCATIONS

Keys on this remote control operate functions similar to those on your original remote controls. For specific key operation, such as Recall or Display, refer to the original owner's manuals for your equipment.

OPERATING KEYS DESCRIPTIONS

1. Mode Keys - Use these keys to program the remote and to select the operating mode (VCR, TV, or CABLE).
2. Video Mode Key - In the TV mode, this key selects the program source: TV or A/V jacks. In VCR mode, this key functions as the TV/VCR key. This key has no function in Cable mode.
3. Number Keys - Use these keys to directly select channels on your VCR, TV, or Cable Converter Box.
4. Recall Key - Press to switch between two channels.
5. Menu Key - Use this key with the and keys to adjust the features of a Sanyo TV on - screen menu system.
6. Mute Key - Press once to turn off the volume. Press again to restore the volume.
7. VCR Keys - These keys control Fast Forward (FF), Rewind (REW), Play, Record, Stop, and Pause functions of your VCR. They operate in all three modes.
8. Reset Key - Press this key twice to restore factory settings on a Sanyo TV.
9. Sleep Key - Use this key to set the Sleep Timer on your TV.
10. Caption Key - Press to select the caption mode: OFF, C1, C2, T1, T2 or QUIKCAP on a Sanyo TV.
11. Channel () and Volume () Keys - Press to scan through the channels and to adjust the volume.
12. Display Key - Press to display the Channel Number on the Screen.

PROGRAMMING THE REMOTE

1. Find your equipment's brand codes in the charts. After programming is confirmed, enter codes in spaces provided on back of remote and below.
2. Press and hold the VCR, TV or CABLE key while entering the two-digit code number. The mode key will flash 5 times.
3. Repeat Step 2 for each piece of equipment you have (VCR, TV, and/or Cable Converter Box).

If you enter an incorrect code number, repeat Step 2.
After entering a code number check the Power and Channel operation. If these functions operate pro p e r l y, pro g r a m ming is complete. If not, reprogram using another code if available.

TV Codes Chart

Cable Converter Box Codes Chart

Special Operating Conditions

• The Caption, Menu, and Reset keys will operate only Sanyo televisions. This is true even when you program the remote to operate another brand of TV or when you select the VCR or Cable mode.
• The Display, Sleep, Vol+, Vol–, Mute and Recall keys operate TV functions regardless of the mode selected.
• The Video key has no function in the Cable mode.
• The Recall key has no function in the VCR and Cable modes.
• Refer to the original owner's manual for specific operation of certain functions, such as; Sleep and Recall.

Operating Tips and Troubleshooting Hints

• To operate each product (VCR, TV, or Cable Box), you must first press the proper mode key (VCR, TV, or CABLE).
• Some manufacturers use different types of remote controls. If your brand lists several codes, try the code listed first. If necessary, reprogram with each number until you find the correct code.
• There may be VCRs, TVs, and Cable Boxes that this remote cannot operate and some models may operate only partially.
• The remote control must be reprogrammed after batteries are replaced.
• Remove the batteries if the remote will not be used for a month or more. Weak batteries may leak, causing damage to the remote control. (Normal battery life is roughly six months.)
• This remote control uses an invisible (infrared) light beam to operate the equipment. Objects between the VCR, TV, or Cable Converter Box and the remote can block this light beam. Therefore, the remote control must be pointed directly at the front of the VCR, TV or Cable Converter Box.
• This remote control cannot add features to your equipment. They must have been originally provided by your manufacturer.
• If the remote fails to operate any of your equipment replace the batteries. Be sure they are installed correctly.

If you have any questions please call toll-free 1-800-877-5032