Related Manuals for Toro Flex-Force Power System 51833T
Summary of Contents for Toro Flex-Force Power System 51833T
- Page 1 Form No. 3461-112 Rev A Flex-Force Power System ™ Stick Edger Model No. 51833—Serial No. 323000001 and Up Model No. 51833T—Serial No. 323000001 and Up *3461-112* Register at www.Toro.com. Original Instructions (EN)
- Page 2 Model No. driveways, sidewalks, and more as needed outdoors. It is designed to use Toro 60V lithium-ion battery Serial No. packs. These battery packs are designed to be charged only by Toro 60V lithium-ion battery chargers.
-
Page 3: Safety Alert Symbol
II. Preparation Keep bystanders and children away from the operating area. Use only the battery pack specified by Toro. Using other accessories and attachments may increase the risk of injury and fire. Plugging the battery charger into an outlet that is not 120 V can cause a fire or electric shock. - Page 4 Replace the battery pack with a genuine tool in rain or in damp or wet locations. Toro battery pack only; using another type of Use the proper tool for your application—Using battery pack may cause a fire or risk of injury.
- Page 5 Do not attempt to service or repair the tool, battery pack, or battery charger except as indicated in the instructions. Have an Authorized Service Dealer perform service using identical replacement parts to ensure that the product is safely maintained. Store an idle tool indoors in a place that is dry, secure, and out of the reach of children.
-
Page 6: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal144-3098 144-3098 decal144-3096 144-3096 decal144-3094 144-3094 1. The battery pack is 3. - Page 7 decal137-9461 137-9461 1. Battery charge status decal139-5210 139-5210 1. Warning—read the Operator’s Manual; stay away from moving parts; keep all guards in place; wear eye protection; do not operate in wet conditions. decal139-5346 139-5346...
-
Page 8: Unfolding The Handle
Setup Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. Allen wrench Unfold the handle. Auxiliary handle assembly Install the auxiliary handle. Edger adjustment tool Important: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer to Charging the Battery Pack (page 14). - Page 9 g333338 Figure 3...
-
Page 10: Installing The Auxiliary Handle
Installing the Auxiliary Handle Parts needed for this procedure: Auxiliary handle assembly Edger adjustment tool Procedure Separate the auxiliary handle from the handle plate by removing the 4 screws (A of Figure Line up the auxiliary handle with auxiliary handle plate on the edger handle (B of Figure Secure the auxiliary handle to the handle plate with the 4 screws previously removed (C of Figure... -
Page 11: Product Overview
Contact your Authorized Service Dealer or authorized Toro distributor or go to www.Toro.com for a list of all approved attachments and accessories. To ensure optimum performance and continued safety certification of the machine, use only genuine Toro replacement parts and accessories. -
Page 12: Operation
Shutting Off the Edger Operation To shut off the trimmer, release the trigger. Starting the Edger Whenever you are not using the edger or are transporting the edger to or from the work area, Align the cavity in the battery pack with the remove the battery pack. -
Page 13: Adjusting The Depth Of Cut
Adjusting the Depth of Cut Remove the battery from the edger. Loosen the wing nut on the wheel and move it up or down in the track to increase or decrease the depth (Figure 10). g333293 Figure 10 Adjust the depth so that the blade barely touches the ground when the machine is held in a normal working position. -
Page 14: Charging The Battery Pack
Charging the Battery Pack Refer to the following table to interpret the LED indicator light on the battery charger. Important: The battery pack is not fully charged Indicator Indicates when you purchase it. Before using the tool for light the first time, place the battery pack in the charger No battery pack inserted and charge it until the LED display indicates the battery pack is fully charged. -
Page 15: Operating Tips
Operating Tips • Hold the edger with your right hand on the rear handle and your left hand on the front handle. • Keep a firm grip with both hands while in operation. • The edger should be held at a comfortable position with the rear handle at about hip height. -
Page 16: Maintenance
If the blade becomes worn, bent, or damaged, replace (Figure 13). it; contact your authorized Toro distributor. Ensure that the battery is removed from the Replacing the Wheel machine. Secure the blade so that it cannot spin by... - Page 17 Specifications (page If the skid plate becomes worn or damaged, replace 11). it; contact your authorized Toro distributor. Important: If you are storing the battery pack for Ensure that the battery is removed from the the off-season, remove the battery pack from the machine.
-
Page 18: Troubleshooting
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Always remove the battery from the tool when troubleshooting, inspecting, maintaining, or cleaning the tool. Problem Possible Cause Corrective Action... - Page 19 Problem Possible Cause Corrective Action The tool does not run or run continuously. 1. There is moisture on the leads of the 1. Allow the battery pack to dry or wipe it battery pack. dry. 2. The battery is not fully installed into the 2.
- Page 20 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.