LG 49UF84 Series Owner's Manual
Hide thumbs
Also See for 49UF84 Series:
- Owner's manual (324 pages) ,
- Owner's manual (73 pages) ,
- Owner's manual (196 pages)
Related Manuals for LG 49UF84 Series
Summary of Contents for LG 49UF84 Series
- Page 1 LED TV UF64** www.lg.com (M4 X L14) : Depending on model / P/No: MFL69081713 (1506-REV00) Printed in Korea...
- Page 5 OPTICAL DIGITAL AUDIO OUT...
- Page 7 43UF640T-TA 49UF640T-TA 43UF640Y-TA 49UF640Y-TA 976 x 621 x 208.7 1108 x 696 x 208.7 (mm) (mm) 976 x 583 x 81.5 1108 x 657 x 81.5 12.0 (kg) 11.7 ) (kg) Power requirement / AC 100-240 V ~ 50 / 60 Hz...
- Page 9 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL68702244* P/NO : MFL68702244 (1604-REV01) Printed in Korea...
-
Page 10: Safety Instructions
Safety instructions Please read these safety precautions carefully before using the product. Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on WARNING earth.) Otherwise possibility you may be electrocuted or injured. Insert power cable plug completely into wall socket otherwise if not Do not place the TV and/or remote control in the following secured completely into socket, fire ignition may break out. - Page 11 Do not plug too many electrical devices into a single multiple electrical Do not put or store inflammable substances near the product. There is a outlet. Otherwise, this may result in fire due to over-heating. danger of combustion/explosion or fire due to careless handling of the inflammable substances.
- Page 12 Only use an authorized AC adapter and power cord approved by discretion. Fire or electric shock accident can occur. LG Electronics. Otherwise, this may result in fire, electric shock, Contact the service centre for check, calibration or repair. malfunction or product deformation.
- Page 13 If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. Signal from Remote Control can be interrupted due to external/internal Only use the attachments / accessories specified by the manufacturer.
- Page 14 Prevent dust collecting on the power plug pins or outlet. This may cause When unplugging the cable, grab the plug and unplug it, by pulling at a fire hazard. the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.
- Page 15 Viewing 3D imaging (Only 3D models) WARNING The panel is a high technology display product with resolution of Viewing environment two million to eight million pixels. You may see tiny black dots and/ or brightly coloured dots (red, blue or green) at a size of 1 ppm on the • ...
- Page 16 < Cautions when using the 3D glasses 18 mm • Make sure to use LG 3D glasses. Otherwise, you may not be able to • Use a certified cable with the HDMI logo attached. view 3D videos properly. • If you do not use a certified HDMI cable, the screen may not display • ...
-
Page 17: Separate Purchase
Cinema 3D Glasses Magic Remote Smart Camera AG-F***DP LG Audio Device Dual Play Glasses Maintenance • When transporting a large TV, there should be at least 2 people. • When transporting the TV by hand, hold the TV as shown in the following illustration. -
Page 18: Using The Joystick Button
Using the joystick button Mounting on a table You can simply operate the TV functions, pressing or moving the joystick (Image shown may differ from your TV.) button up, down, left or right. 1 Lift and tilt the TV into its upright position on a table. NOTE • ... -
Page 19: Mounting On A Wall
Use an authorised LG wall mount and We recommend the use of LG’s wall mount bracket. LG’s wall mount contact the local dealer or qualified personnel. bracket is easy to move with cables connected. When you do not use • ... -
Page 20: Connections (Notifications)
Connections (notifications) • When installing the wall mounting bracket, use the adhesive label or protective cover provided. The adhesive label or protective cover will protect the opening from accumulating dust and dirt. (Only Connect various external devices to the TV and switch input modes to when the label or cover is provided) select an external device. -
Page 21: Remote Control
CI module connection CAUTION (Depending on model) • Do not mix old and new batteries, as this may damage the remote control. View the encrypted (pay) services in digital TV mode. • In Analogue TV and some countries, some remote control buttons • ... - Page 22 GUIDE Q.VIEW INFO MUTE (Depending on model) RECENT MY APPS INPUT Q.MENU RATIO SUBTITLE LIVE MENU EXIT BACK SLEEP TEXT T.OPT LIVE TV GUIDE Q.VIEW SUBTITLE TV/RAD PAGE RECENT MY APPS Shows the previous history. (HOME) Accesses the Home menu. (POWER) Turns the TV on or off.
-
Page 23: Magic Remote Functions
Shows the previous history. (POWER) Turns the TV on or off. (HOME) Accesses the Home menu. (INPUT) Changes the input source. * Pressing and holding the button displays all the lists of Shows the list of Apps. TELETEXT buttons( ) These buttons are used for external inputs. - Page 24 Magic Remote with your TV. * Pressing and holding the button will let you cancel and re- register Magic Remote at once. Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
-
Page 25: Open Source Software Notice
0197 disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@ (Only UF64**, UF68**, UF73**, UF77**, UF83**, UF84**, UH60**) lge.com. - Page 26 CI Module Size (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % 1 Only Satellite models.
- Page 28 (Only DTV) Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
-
Page 29: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... -
Page 30: Key Codes
KEY CODES key CODeS • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button... - Page 31 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
-
Page 32: Customer Computer
(TV) (PC) EXTERNAL CONTROL DEVICE SETUP (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &... -
Page 33: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA... -
Page 34: Transmission / Receiving Protocol
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. - Page 35 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 36 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 37 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 38 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 39 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 40 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]...