Table of Contents
Advertisement
Before Installing
Before Installing
Caution
Unpacking and Inspecting the Shelf
Step 1
Step 2
Cisco ONS 15540 ESP Hardware Installation Guide
2-2
Before you install the shelf, you must complete the following tasks:
Unpack and inspect the shelf.
•
•
Maintain a network record.
•
Mount the shelf.
Use extreme care when removing or installing connectors so you do
not damage the connector housing or scratch the end-face surface of
the fiber. Always install protective covers on unused or disconnected
components to prevent contamination. Always clean fiber
connectors before installing them.
The Cisco ONS 15540 shelf comes with the standard mounting set. The shelf is
thoroughly inspected before shipment. If any damage has occurred during
transportation or if any item is missing, notify your Cisco customer service
representative immediately.
Upon receipt, inspect the equipment as follows:
Take inventory.
Compare the equipment inside with the packing slip and the equipment list
provided by customer service. If there are any discrepancies, notify the Customer
Service Center.
Check for external damage.
Visually check all components and immediately report any shipping damage to
your customer service representative. Have the following information ready:
•
Invoice number of shipper (see packing slip)
•
Model and serial number of the damaged unit
Chapter 2
Installing the Cisco ONS 15540
78-15095-01
Advertisement
Table of Contents
