Pioneer S-SB5R - Speaker System Manual

Table of Contents

Contents

1 What's in the box
2 Home theater sound setup
3 Preparing the speakers
4 Wall mounting the speakers
5 Specifications
6 Documents / Resources
- 6.1 Download manual

What's in the box

Use only with pioneer front surround system. See instruction manual.
Do not connect the supplied speakers with any other amplifier. This may result in malfunction or fire.

Please confirm that the following items are all supplied.

Surround speakers x2
Speaker cables (10 m) x2
Wall mounting brackets x2
Non-skid pads x6
Screws x2
Instruction manual (This document)

Home theater sound setup

When assembling the speakers, lay them down flat on their side to avoid accidents or injury. Make sure to use a stable surface when assembling, setting up, and placing the speakers.

This is a standard multichannel surround sound speaker setup for optimal 5.1 channel home theater sound.
Home theater sound setup

Preparing the speakers

Attach the non-skid pads to the base of each speakers.
Use the supplied adhesive to attach three pads to the base (bottom) of each speaker.
Connect each speaker.
For the speaker connection, refer to the operating instructions of Front Surround system. Each speaker in the illustration can be identified by means of the colorcoded indicator provided on the rear-surface label.
Surround left: Blue
Surround right: Gray

These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts.
After connecting the plugs, pull lightly on the cables to make sure that the ends of the cables are securely connected to the terminals. Poor connections can create noise and interruptions on the sound.
If the cable's wires happen to be pushed out of the terminals, allowing the wires to come into contact with each other, it places an excessive additional load on the amp. This may cause the amp to stop functioning, and may even damage the amp.
Be sure to connect wires to the correct terminal polarities (+, –) at the speaker and amplifier, or the proper surround effect will not be produced.

Wall mounting the speakers

The surround speakers have holes for mounting brackets, and depending on the speaker setup you choose, you can wall-mount the surround speakers. Refer to Wall mounting the speakers on the operating instructions of Front Surround System.

Make sure to tighten the supplied screw as securely as possible when attaching the bracket to the back of the speaker.

Before mounting

Remember that the speaker system is heavy and that its weight could cause the screws to work loose, or the wall material to fail to support it, resulting in the speaker falling. Make sure that the wall you intend to mount the speakers on is strong enough to support them. Do not mount on plywood or soft surface walls.
Mounting screws are not supplied. Use screws suitable for the wall material and support the weight of the speaker.

If you are unsure of the qualities and strength of the wall, consult a professional for advice.
Pioneer is not responsible for any accidents or damage that result from improper installation.

Specifications

Enclosure	Closed-box bookshelf type (magnetically shielded)
System	6.6 cm 1-way system
Speakers	6.6 cm cone type
Impedance	4 Ω
Frequency range	82 Hz to 20 kHz
Dimensions	96 mm (W) x 96 mm (H) x 96 mm (D)
Weight	0.5 kg

Specifications and the design are subject to possible modifications without notice, due to improvements.

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.