Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZSFN132W1
Summary of Contents for Zanussi ZSFN132W1
- Page 1 User Manual GETTING STARTED? EASY. ZSFN132W1 EN User Manual Dishwasher...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: Safety Instructions
This appliance may be used in, offices, hotel guest rooms, bed • & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels. Do not change the specification of this appliance. •... -
Page 4: Water Connection
• Make sure not to cause damage to the mains SERVICE plug and to the mains cable. Should the mains • To repair the appliance contact the Authorised cable need to be replaced, this must be carried Service Centre. Use original spare parts only. out by our Authorised Service Centre. -
Page 5: Product Description
PRODUCT DESCRIPTION Worktop Lower basket Upper spray arms Upper basket Lower spray arm Cutlery drawer Filters The graphic is a general overview. For Rating plate more details, refer to other chapters or documents provided with the Salt container appliance. Air vent Rinse aid dispenser Detergent dispenser... -
Page 6: Control Panel
CONTROL PANEL On/off indicator Start button Programme marker Programme knob Indicators Delay button INDICATORS Indicator Description Drying phase indicator. It is on when you select a programme with the drying phase. It flashes when the drying phase operates. Salt indicator. It is on when the salt container needs refilling. It is always off while the programme operates. -
Page 7: Consumption Values
Programme Dishwasher load Degree of soil Programme phases Crockery, cutlery, Normal, lightly • Prewash pots, pans dried-on • Dishwashing 50 °C • Intermediate rinse • Final rinse 60 °C • Drying • AirDry Crockery, cutlery, Normal to heavy, • Prewash pots, pans dried-on •... -
Page 8: Information For Test Institutes
Water Energy Duration 1)2) Programme (kWh) (min) 0.014 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quan- tity of dishes and the degree of soil can change the values. 2) The values for programmes other than ECO are indicative only. INFORMATION FOR TEST INSTITUTES To receive the necessary information for conducting performance tests (e.g. - Page 9 German degrees French degrees Clarke de- mmol/l mg/l (ppm) Water softener level (°dH) (°fH) grees 23 - 28 40 - 50 4.0 - 5.0 395 - 504 28 - 35 19 - 22 33 - 39 3.3 - 3.9 325 - 394 23 - 27 15 - 18 26 - 32...
-
Page 10: The Rinse Aid Empty Notification
How to set the water softener level • is on = the rinse aid empty notification The appliance must be in programme selection is activated. mode. • is off = the rinse aid empty notification Make sure that the programme marker on the knob is deactivated. -
Page 11: Before First Use
How to deactivate AirDry The appliance must be in programme selection mode. Make sure that the programme marker on the knob is set to the on/off position. 1. To enter the user mode, press and hold . At the same time turn the knob counterclockwise until the programme marker indicates the first programme. -
Page 12: How To Fill The Rinse Aid Dispenser
HOW TO FILL THE RINSE AID DISPENSER 4. Carefully shake the funnel by its handle to get the last granules inside. 5. Remove the salt around the opening of the salt container. CAUTION! The compartment (C) is for rinse aid only. Do not fill it with detergent. -
Page 13: Setting And Starting A Programme
2. Put the detergent in the compartment (A). You Make sure that there is detergent in the detergent can use detergent in tablets, powder or gel. dispenser before you start a new programme. 3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of Cancelling the delay start while the the appliance door. -
Page 14: Hints And Tips
HINTS AND TIPS GENERAL • Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on Follow the hints below to ensure optimal cleaning the tableware, we recommend that you use and drying results in daily use and to protect the tablets with long programmes. -
Page 15: Care And Cleaning
• The correct quantity of detergent is used. • Make sure that the spray arms can move freely before you start a programme. UNLOADING THE BASKETS BEFORE STARTING A PROGRAMME 1. Let the tableware cool down before you remove it from the appliance. Hot items can be Before you start the selected programme, make easily damaged. -
Page 16: Cleaning The Lower Spray Arm
7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. - Page 17 3. To install the spray arm back, press it downwards. 3. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. CLEANING THE UPPER SPRAY ARMS We recommend to clean the upper spray arms regularly to prevent soil from clogging the holes.
-
Page 18: Troubleshooting
TROUBLESHOOTING Refer to the below table for information on possible WARNING! Improper repair of the problems. appliance may pose a danger to the With some problems, the dedicated indicator safety of the user. Any repairs must be flashes intermittently to indicate a malfunction and performed by qualified personnel. - Page 19 Problem and alarm code Possible cause and solution Malfunction of the wash pump or the drain • Switch the appliance off and on. pump. • The indicator flashes 5 times in- termittently. • The light related to the start button flashes continuously.
- Page 20 Problem and alarm code Possible cause and solution The appliance trips the circuit-beaker. • The amperage is insufficient to supply simultaneous- ly all the appliances in use. Check the socket am- perage and the capacity of the meter or turn off one of the appliances in use.
- Page 21 Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the function AirDry. • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty. •...
-
Page 22: Technical Information
TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 446 / 850 / 615 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 10 (1.0) Water supply max 60 °C Cold water or hot water Capacity Place settings... - Page 24 WWW.ZANUSSI.COM/SHOP...