Table of Contents
Advertisement
Installation Guidelines and Safety Warnings
Warning
To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended
ambient temperature of: 40° C (104° F). The maximum temperature is derated by 1.0° C for every 1000 ft
(305 m) of altitude above sea level. Statement 1047
Warning
To prevent airflow restriction, allow clearance around the ventilation openings to be at least 50 mm (5 cm).
Statement 1076
Warning
Read the installation instructions before connecting the system to the power source. Statement 1004.
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations. Statement
1040.
Warning
No user-serviceable parts inside. Do not open. Statement 1073.
Warning
Installation of the equipment must comply with local and national electrical codes. Statement 1074.
Warning
Hot surface. Statement 1079.
Warning
Connect the unit only to DC power source that complies with the Safety Extra-Low Voltage (SELV)
requirements in IEC 60950 based safety standards. Statement 1033.
Warning
Class 1 laser product. Statement 1008
Cisco Catalyst 9800-L Wireless Controller Hardware Installation Guide
8
Preparing Your Site for Installation
Advertisement
Table of Contents
