Table of Contents
Advertisement
Sending Faxes
One time broadcast
This feature is useful for sending the same document to selected parties only once. Select the
parties for each transmission.
Insert the document FACE DOWN.
1
If necessary, press
select the desired resolution (p. 28).
2
Press
.
Display:
3
Press
or
displayed.
Press
to start programming the
4
SET
stations you want to transmit.
5
Press
or
you want to transmit is displayed.
Example:
6
Press
SET
.
To program other stations, repeat steps 5
and 6 (up to 20 stations).
7
Press
SET
to start transmission to the
programmed stations.
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (p. 35).
To cancel the broadcast setting
STOP
1. Press
while the unit displays the following
message.
Display:
The display will show the following.
2. Press
.
SET
32
transmission!
or
repeatedly to
DIRECTORY[+ -]
<MAILBOX>
until the following is
<ONE1TIME1BROAD>
PRESS SET
DIR=
[00]
NAVI.[+ -]A&ASET
until the desired station
Bill
6543210
DIR=Bill
[01]
SEND:PRESS SET
1BROADCASTING
SEND1CANCELED?
YES:SET/NO:STOP
Display
H
Note:
If you select the "FINE", "SUPER FINE" or
"PHOTO" resolution, the number of pages
that the unit can transmit will decrease.
If the document exceeds the memory capacity
(p. 85), sending will be canceled.
If one of the stations is busy or does not
answer, the station will be skipped. All
skipped stations will be redialed up to 2 times
after all of the other stations have been
called.
STOP
SET
Hide quick links:
Advertisement
Table of Contents
