Advertisement
EMU00388*
CHECKING PROPELLER
1) Remove the 5 screws and the cover.
2) Remove the spark plug caps from the
spark plugs.
w
You could be seriously injured if the
engine accidentally starts while you are
F1042
near the propeller.
8 Before
installing the propeller, remove the
spark plug caps from the spark plugs.
Also, put the shift control in Neutral,
put the main switch in the "OFF" posi-
tion and remove the key, and remove
the lanyard from the engine stop
switch. Turn off the battery cut-off
switch if your boat has one.
8 Do not use your hand to hold the pro-
F1026
peller when loosening or tightening the
propeller nut. Put a wood block
between the cavitation plate and the
propeller to prevent the propeller from
turning.
EMU00390
Propeller Checking Point
8 Check each of the propeller blades for
wear, erosion from cavitation or ventila-
602051
tion, or other damage.
8 Check the splines for wear and damage.
8 Check for fish line winding around the
propeller shaft.
8 Check the propeller shaft oil seal for
damage.
602036
4-23
inspecting,
removing
GB
or
- Quick Links:
- Table of Contents
- Carburant
- Specification Data
Hide quick links:
Advertisement
Chapters
