hit counter script
NEC N8143-122F Getting Started
NEC N8143-122F Getting Started

NEC N8143-122F Getting Started

17.3-inch lcd console drawer
Hide thumbs Also See for N8143-122F:

Advertisement

Quick Links

N8143-122F 17.3-inch LCD Console Drawer (1port)
Be sure to read
Keep this document nearby so that you may refer to it as necessary. Before using this console drawer, be
sure to read this document.
Precautions for use
This document provides information required to use your server and console drawer safely and properly.
Safety precautions
Follow the instructions in this document for the safe use of the NEC Express server and console drawer.
This document describes hazardous parts of the server and console drawer, possible hazards, and how to
avoid them. Components with possible danger are indicated with a warning label placed on or around them.
In this guide or on warning labels, CAUTION or WARNING is used to indicate a degree of danger. These
terms are defined as follows:
CAUTION
Indicates there is a risk of burns, other personal injury, or property damage
WARNING
Indicates there is a risk of death or serious personal injury
Precautions and notices against hazards are presented with one of the following three symbols.
The individual symbols are defined as follows:
This symbol indicates the presence of a hazard if the instruction
is ignored.
Attention
An image in the symbol illustrates the hazard type.
This symbol indicates prohibited actions. An image in the symbol
Prohibited
illustrates a particular prohibited action.
action
This symbol indicates mandatory actions. An image in the symbol
Mandatory
illustrates a mandatory action to avoid a particular hazard.
action
(A label example used in this document)
Symbols used in this document and on warning labels
EXP122
Attentions
Indicates the presence of electric shock
hazards.
Indicates there is a risk of fire or fumes.
1st Edition, Jul. 2017
Indicates there is a risk of explosion.
Prohibited actions
Do not disassemble, repair, or modify the
console drawer. Otherwise, an electric
shock or fire may be caused.
Do not use the console drawer in the place
where water or liquid may pour. Otherwise,
an electric shock or fire may be caused.
Indicates a general prohibited action
that cannot be specifically identified
Mandatory actions
Unplug the power cord of the console
drawer. Otherwise, an electric shock or fire
.
may be caused
Indicates a mandatory action that cannot
be specifically identified. Make sure to
.
follow the instruction
Safety notes
General
(Example)
Keep water or foreign matter away from the console drawer.
Do not drop a pin, paper clip, water, alcohol and other foreign materials or liquid into the
(Electric shock risk)
console drawer. Failure to follow this warning may cause an electric shock, a fire, and
(Example)
other failures of the console drawer. If such things accidentally enter the console drawer,
immediately turn off the power and disconnect the power plug from the outlet. Do not
(Do not disassemble)
disassemble the console drawer, and contact your sales representative.
(Example)
Do not break or damage the LCD.
If the LCD is damaged and the liquid inside enters the mouth, gargle immediately. If the
(Disconnect a plug)
liquid adheres to skin or enters the eye, wash with running water for at least 15 minutes
and consult a doctor. LCD contains irritative substance.
Do not use the console drawer for services where critical high availability may directly
affect human lives or high reliability is required.
The console drawer is not intended to be used for control facilities or devices concerning
human lives, including medical devices, nuclear facilities and devices, aeronautics and
space devices, transportation facilities and devices; and facilities and devices requiring
high reliability. We assume no liability for any accident resulting in personal injury, death,
or property damage if the console drawer has been used in the above conditions.
Do not use the console drawer if any smoke, odor, or noise is present.
If smoke, odor, or noise is present, immediately turn off the console drawer and
disconnect the power plug from the outlet, then contact your sales representative. Using
the console drawer in such conditions may cause a fire.
Do not insert needles or metal objects.
Do not insert needles or metal objects into ventilation holes in the console drawer or
openings in the optical disk drive. Doing so may cause an electric shock.
Indicates the presence of mechanical parts
that can result in pinching or other bodily injury.
Indicates the presence of mechanical parts
that can result in bodily injury.
Indicates a general notice or warning that
cannot be specifically identified.
Do not touch the console drawer with wet
hand. Otherwise, an electric shock may be
caused.
Do not touch the component specified by this
symbol. Otherwise, an electric shock or burn
may be caused.
.
Make sure equipment is properly grounded.
Otherwise, an electric shock or fire may be
.
caused
CAUTION
WARNING
Rack installation
CAUTION
Ambient temperature
The operating temperature of the rack ambient is greater than room ambient. Therefore,
the console drawer and other optional devices must be installed in an environment
compatible with the maximum ambient temperature (Tma) specified by the
manufacturer.
Air Flow
Make air flow required for safe operation of the console drawer and other units.
Loading of rack
Mount the console drawer and other units onto the rack evenly. If the weight of units is
shifted to the right, the left, or the upper of the rack, the possibility of rack falling is
increased.
Circuit overloading
Consideration should be given to the connection of the equipment to the supply circuit
and the effect that overloading of the circuits might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment nameplate ratings should be used
when addressing this concern.
Reliable earthing
Maintain the reliable earthing of mounted units.
Do not attempt to carry or install the device alone.
More than two people are required to carry or install the rack. Otherwise, the rack may
fall, resulting in personal injury or damage to peripheral devices. In particular, tall racks
such as a 44U rack become unstable unless steadied with a stabilizer. Make sure that
two or more people hold the rack to carry or install the rack.
Do not install with the load weight distributed unevenly.
To avoid unevenly distributing the load of the rack and device, install a stabilizer or
connect multiple racks to distribute the weight. Otherwise, the rack may fall, resulting in
personal injury.
Do not install components alone, and check the door hinge pins of the rack.
At least two people are required to install a rack door, rail, and other rack components.
When installing the door, make sure that both upper and lower hinge pins are held in
place. Incomplete attachment may cause components to fall off as well as personal
injury.
Do not pull out the console drawer from a rack that is not stable.
When pulling out the console drawer from the rack, make sure that the rack is stabilized
(by using stabilizers or quake-proof fixtures). Otherwise, the rack may fall, resulting in
personal injury.
Do not pull out more than one device from the rack.
Pulling out multiple devices from the rack may cause the rack to fall, resulting in personal
injury.
Pull out only one device at one time.
Do not exceed the rated capacity of the power supply when connecting devices.
To prevent burn injuries, fire, and damage to the console drawer, make sure the load on
the branch circuit that supplies power to the rack will not exceed the rated load.
Do not get your fingers caught in the rails.
When mounting/removing the console drawer onto/from the rack, be careful to avoid
getting your fingers caught in the rails or cutting your fingers on the rails.
Do not apply any weight on the console drawer when it is pulled out from the rack.
Do not apply force on the console drawer when it is pulled out from the rack. Doing so
causes the frames to bend, which makes it impossible to be mounted on the rack. It may
also cause the console drawer to fall, resulting in personal injury.

Advertisement

Table of Contents
loading

Summary of Contents for NEC N8143-122F

  • Page 1 Appropriate consideration of equipment nameplate ratings should be used Follow the instructions in this document for the safe use of the NEC Express server and console drawer. when addressing this concern. Mandatory actions...
  • Page 2: Warning Labels

    Keep animals such as pets away from the console drawer. Pet hair or other waste enters CAUTION Use only interface cables provided by NEC and locate a proper device and connector the console drawer, which may cause a fire or electric shock.
  • Page 3 N8143-122F 17.3 英寸 LCD 抽屜式控制臺(1 端口) 安裝機架時的注意事項 本指南及警告標籤中使用的符號及含義 EXP122 注意 敦促注意 開 始 指 南 環境溫度 機架環境的工作溫度高於室溫。因此,抽屜式控制臺和其他可選的設備安裝在與製造商指定 表示有觸電的危險。 表示有夾到手指而受傷的危險。 的最高環境溫度(Tma)相容的環境中。 第壹版, 2017 年 7 月 表示有冒煙和著火的危險。 表示有受傷的危險。 氣流 請務必閱讀 為抽屜式控制臺和其他裝置提供安全操作所需的氣流。. 表示有爆炸或者破裂的危險。 表示非特定的一般的警告提示。 將此文檔放在旁邊,以便根據需要進行參考。使用抽屜式控制臺前,一定要閱讀本文檔。 裝載機架 將抽屜式控制臺和其他設備單元均勻的安裝到機架上。 如果設備單元的重量移動到機架的右 禁止行為 側,左側或者上側,則機架下降的可能性增加。 使用時注意事項 請不要對本抽屜式控制臺進行拆卸、修理、...
  • Page 4 不要在抽屜式控制臺插著電源插頭時連接或拔除介面電纜 不要放置雜物 不要以在一個電源插座上增加插線板的方式連接電源線 請在關閉本產品的電源、將電源插頭從插座上拔出之後再連接或拔除介面線纜。即使關閉 不要在本產品上放置裝果汁等的瓶子、杯子等雜物。如果其中的液體浸入,不僅會造成本 插座如果超過額定電流,有因過熱而導致火災的危險。 了電源,在連接電源線的狀態下接觸本產品的線纜、接頭時,也有觸電、或因斷路而引起火 產品不能正常運行,還有觸電和火災的危險。 災的危險. 務必將電源插頭插入電源插座的底部. 請將電源插頭直插到底部。如果只將電源插頭插入一半可能引起電弧跟蹤,增加火災的可 有關清理和使用的注意事項 能性。. 警告標籤 注意 不要使用任何未經授權的電源線 本產品中在隱藏危險的部件及其附近貼有警告標籤。這是為了隨時提醒使用者在操作本產品時意識到這些危 確保設備安裝到位 僅使用 NEC 授權的電源線。當電源線的電流超過額定電流時,可能導致火災。 險(請不要撕下、塗抹或使標籤汙濁不清) 。如果此標誌不能粘貼、剝落或汙濁以致難以辨別,請聯繫經銷 請確保電源電纜以及介面電纜安裝到位。不徹底的安裝可能導致接觸不良,從而造成冒煙 另外,為防止由於電源線的破損而造成的觸電和火災,請注意以下事項。 商。 甚至引發火災。 •不要拉拽電綫. •不要夾電源綫 •不要彎折電源綫 •電源綫遠離化學藥品 轉讓,移動和處置 警告 •不要擰搓電源綫 •不要在電源線上載入物品 •不要踩踏電源綫 •要對電源線進行改造、加工、修復。 轉讓給協力廠商 •使用前展開電源線 •不要使用受損的電源線。受損的電源線要立即...
  • Page 5: How To Set Up

    ➟➟➟Continued Safety Precautions How to Set up Before starting setup, • Do not disconnect/connect the plug while your hands are wet. • Do not install the server and console drawer in dusty, humid, be sure to read “Safety precautions” and "Safety notes" of Failure to follow this warning may cause an electric shock.
  • Page 6: Step 4 Connecting Usb Mouse

    USB port. Winder The external USB port accepts NEC genuine optional USB mouse. If any USB devices other 1. Connect the provided USB cable and VGA cable or DVI cable to the console drawer and the server. (See ⑥ in the figure above.) than NEC product are used, they may not be recognized or may fail to operate correctly.
  • Page 7 N8143-122F 17.3 英寸 LCD 抽屉式控制台(1 端口) 安装机架时的注意事项 本指南及警告卷标中使用的符号及含义 EXP122 注意 敦促注意 开 始 指 南 环境温度 表示有触电的危險。 表示有夹到手指而受伤的危险。 机架环境的工作温度高于室温。因此,抽屉式控制台和其他可选的设备安装在与制造商指定 的最高环境温度(Tma)兼容的环境中。 第一版, 2017 年 7 月 表示有冒烟和着火的危险。 表示有受伤的危险。 气流 请务必阅读 為抽屜式控制台和其他装置提供安全操作所需的气流。. 表示有爆炸或者破裂的危险。 表示非特定的一般的警告提示。 将此文档放在旁边,以便根据需要进行参考。使用抽屉式控制台前,一定要阅读本文档。 装载机架 將抽屜式控制台和其他设备但愿均勻的安裝到机架上。 如果设备单元的重量移动到机架的右 禁止行为 侧,左侧或者上侧,则机架下降的可能性增加。 使用时注意事项 请不要对本抽屜式控制台进行拆卸、修理、...
  • Page 8 不要在抽屉式控制台插着电源插头时连接或拔除接口电缆 不要放置杂物 不要以在一个电源插座上增加插线板的方式连接电源线 请在关闭本产品的电源、将电源插头从插座上拔出之后再连接或拔除接口线缆。即使关闭 不要在本产品上放置装果汁等的瓶子、杯子等杂物。如果其中的液体浸入,不仅会造成本 插座如果超过额定电流,有因过热而导致火灾的危险。 了电源,在连接电源线的状态下接触本产品的线缆、接头时,也有触电、或因断路而引起火 产品不能正常运行,还有触电和火灾的危险。 灾的危险. 务必将电源插头插入电源插座的底部. 请将电源插头直插到底部。如果只将电源插头插入一半可能引起电弧跟踪,增加火灾的可 能性。. 有关清理和使用的注意事项 警告标签 注意 不要使用任何未经授权的电源线 本产品中在隐藏危险的部件及其附近贴有警告标签。这是为了随时提醒用户在操作本产品时意识到这些危险 确保设备安装到位 仅使用 NEC 授权的电源线。当电源线的电流超过额定电流时,可能导致火灾。 (请不要撕下、涂抹或使标签污浊不清) 。如果此标志不能粘贴、剥落或污浊以致难以辨别,请联系经销 请确保电源电缆以及接口电缆安装到位。不彻底的安装可能导致接触不良,从而造成冒烟 另外,为防止由于电源线的破损而造成的触电和火灾,请注意以下事项。 商。 甚至引发火灾。 •不要拉拽电线. •不要夹电源线 •不要弯折电源线 •电源线远离化学药品 转让,移动和处置 警告 •不要拧搓电源线 •不要在电源线上载入物品 •不要踩踏电源线 •要对电源线进行改造、加工、修复。 转让给第三方 •使用前展开电源线 •不要使用受损的电源线。受损的电源线要立即...
  • Page 9 ➟➟➟续正面 安 全 注 意 事 项 安装流程 . 不要置于水、湿气、灰尘、油、烟多的地方以及阳光直射的地方。 .请不要用湿手插拔电源插头。否则可能触电。 安装设备前请仔细阅读“用户指南”中的“安全预防措施”和“使用注意 . 打雷时请不要触摸本设备,包括线缆等。否则可能触电。 . 请将电源线缆连接到指定电压和插座上。 下面对开箱后直到本产品可用的步骤进行说明。请按照该开始指南进行操作。 事项~必读~”的“安全注意事项,并严格遵守注意事项以便正确安装。 . 電源线缆请不要连接延长线。 . 不要自行分解、修理、改造。 导轨 能保证前后 1m 以上、左 Step 1 确认附件 4. 从导轨前面将控制台抽屉放入轨 右 60cm 以上, 高 40cm 以 上的空间 道。 (右图④) 打开包装箱,确认附件齐全。...
  • Page 10 3. 将线缆通过绕线器绕线(见 ⑬ ),USB 连接器插向 USB 端口 (见 ⑭)。如果由 Step 4 连接 USB 鼠标 ⑧ 于线缆长度,不能正确连接 USB 连接器的话,请在绕线器上调整线缆长度。 控制台抽屉配备一个外部的 USB 端口。只有 USB 鼠标可以连接到此 USB 端口。 外部的 USB 端口支持 NEC 可选 USB 鼠标如果使用 NEC 产品以外的 USB 设备,可能无法识别或无 法正常运行。 ⑭ ⑨ • 使用外部 USB 鼠标时不要放在控制台抽屉的键盘上。...

Table of Contents