hit counter script

Specifications; Attachments/Accessories - Toro GrandStand HDX 72506 Operator's Manual

With 52in or 60in turbo force cutting unit
Table of Contents

Advertisement

Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance
(Figure
6).
1. Safety-interlock symbols
2. Battery light
Safety-Interlock Indicators
Symbols on the hour meter indicate with a black
triangle that the interlock component is active
6).
Battery-Indicator Light
If you turn the key to the O
seconds, the battery voltage displays in the area
where the hours are normally displayed.
The battery light turns on when you turn the key to the
O
position and when the charge is below the correct
N
operating level
(Figure
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position
(Figure
5).
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
, R
FF
Starting the Engine (page
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction.
Figure 6
3. Hour meter
position for a few
N
6).
to F
LOW
, and S
. Refer to
UN
TART
16).
Fuel-Shutoff Valve
Close the fuel-shutoff valve when transporting or
storing the machine; refer to
Valve (page

Specifications

Note:
Specifications and design are subject to
change without notice.
Cutting width
Width with
deflector down
g009467
Width with
deflector raised
Length with
platform down
Length with
platform up
Height
Weight
(Figure

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
AST
11
Using the Fuel-Shutoff
25).
52in Mower Deck
131 cm (52 inches)
173 cm (68 inches)
137 cm (54 inches)
218 cm (86 inches)
180 cm (71 inches)
127 cm (50 inches)
481 kg (1061 lb)
www.Toro.com
for a list of all
60in Mower Deck
152 cm (60 inches)
193 cm (76 inches)
157 cm (62 inches)
224 cm (88 inches)
188 cm (74 inches)
127 cm (50 inches)
495 kg (1091 lb)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grandstand hdx 72510

Table of Contents