Figure 58. Remove ten screws and hinges
Screw specifications
M2.0 × L3.5
M2.0 × L2.5
Go to
https://support.lenovo.com/partslookup
replacement part:
Hinge
Remove the EDP cable
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD module (for 14–inch models)" on page 56
"Remove the LCD module (for 15–inch and 16–inch models)" on page 58
"Remove the hinge cover" on page 60
"Remove the LCD bezel" on page 61
"Remove the LCD panel" on page 62
Step 1.
Disconnect the EDP cable from the camera board. Then, remove the EDP cable.
Number of screws
4
6
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
65