LG SK10Y - Wi-Fi Sound Bar Simple Manual

Also See for SK10Y:

Owner's manual (66 pages)

Table of Contents

Contents

1 Front Panel
2 Rear Panel
3 Subwoofer Connection
4 TV Connection
5 Network Connection
6 Remote control
7 Additional Information
8 Documents / Resources
- 8.1 References
- 8.2 Download manual

LG SK10Y - Wi-Fi Sound Bar Simple Manual

Front Panel

Please read this manual carefully before operating your set and retain it for future reference.

Front Panel
(Standby) - Switches the unit ON or OFF.
(Function) - Selects function
(Volume) - Adjusts volume
- Selects Wi-Fi function.

LED indicator: Shows connection status.

White (Blinking): Waiting for network connection on Wi-Fi function
White (Staying on): Network connection is completed on Wi-Fi function or the other functions are selected.
White (Dimmed): Standby mode with network connection.
Red (Staying on): Standby mode without network connection.

Rear Panel

Rear Panel
USB (Service only) - S/W download connector.
LAN - Connect to router.
PORTABLE IN - Connect portable device.
OPTICAL IN - Connect to an optical device.
HDMI OUT (TV ARC) - Connect to a TV.
HDMI IN (1) / HDMI IN (2) - Connect to device with HDMI OUT.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow steps below.

Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
Turn on the sound bar.
The sound bar and wireless subwoofer will be automatically connected. The subwoofer's green LED turns on.

Manually Subwoofer Connection
If the subwoofer does not make sound, try to connect manually.

Press Pairing button on the rear of the wireless subwoofer.

The green LED on the rear of the wireless subwoofer blinks quickly. (If the green LED does not blink, press and hold the Pairing button.)

Turn on the sound bar.
Pairing is completed.

The green LED on the rear of the wireless subwoofer turns on.

warning Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless interference.
To prevent wireless interference.

TV Connection

Connect the sound bar and TV using Optical () or HDMI ARC ().

Optical Connection
1. Connect the sound bar to the TV using Optical cable.
2. Set up [External Speaker (Optical)] on your TV setting menu.
HDMI(ARC) Connection
1. Connect the sound bar to the TV using HDMI cable.
2. Set up [External Speaker (HDMI ARC)] on your TV setting menu.

warning

HDMI connection is unavailable if your TV does not support HDMI ARC.
If this unit is connected by OPTICAL and ARC at the same time, the ARC signal is a high priority.

Additional Device Connection

Connect to the external device like as follow.
Set the input source by pressing on the remote control or unit repeatedly.

Network Connection

Check network condition. A router connected to network should be installed.
Connect your smart device to your home network.
Connect the sound bar to the power supply.

warning All devices should be connected to same router.

Download LG Wi-Fi Speaker Application
Download "LG Wi-Fi Speaker" on the App Store or Google Play Store.

Launch LG Wi-Fi Speaker App
Follow the steps for wired or wireless connection displayed on the screen.

Remote control

Remote control
SOUND EFFECT: Selects a sound effect mode.
: Adjusts sound level of each speaker.
AV SYNC: Synchronizes the audio and video.
INFO: Displays the input source information.
AUTO VOL: Adjusts too loud or low output volume level appropriately.
AUTO POWER: Automatically turns on by an input source.

Replacement of Battery

Additional Information

Specification

Power requirement	Refer to the main label.
Power consumption	Refer to the main label.
Dimensions (W x H x D)	Approx. 1443.0 mm x 63.0 mm x 146.0 mm (56.8 inch x 2.5 inch x 5.7 inch)
Amplifier (Total RMS Output power)	550 W RMS