NEC NP310 Installation Manual
Ceiling mounted and desktop
Hide thumbs
Also See for NP310:
- User manual (115 pages) ,
- Command manual (60 pages) ,
- Control commands (54 pages)
Advertisement
NP310/NP410/NP510 Installation Guide
Ceiling Mounted and Desktop
Contents
Product Description, Lens Specs, Notes and Formulas
Diagrams & Distance Charts
Cabinet Dimensions
Ceiling Mount Dimensions
Input Panel and Control Codes
Product Description
Type:
3 panel LCD projector,
NP510:
NP310/410:
Resolution:
1024 x 768
Fan Noise:
35 dB / 29dB @ 1 meter
Power Consumption: NP310/410/NP510
Lens Specifications
Throw Ratio:
1.5 – 1.8:1 (for 100" diagonal)
Offset Angle:
8.0° - 9.6° (for 100" diagonal)
Screen Sizes:
21" - 300" diagonal (4:3)
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on a 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary 5%.
Formulas
The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width
for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for "W" in
the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2:
Definitions:
W = Image Width
H = Image Height (size)
B = Vertical distance between lens center and screen center
C = Throw distance
D = Vertical distance between lens center and screen top
(screen bottom for desktop application)
Projection Formulas:
B = 0.258W
C (wide) = 1.539W – 1.176
C (tele) = 1.852W – 1.173
D = 0.118W
α (wide) = tan¯¹ (B/C(wide))
α (tele) = tan¯¹ (B/C(tele))
www.necdisplay.com
0.63" p-Si TFT w/MLA
0.63" p-Si TFT
251W (max)
NEC Display Solutions of America, Inc.
Pg 1
Pg 2
Pg 3-4
Pg 5
Pg 6
Dimensions: 12.1" (W) x 4.3" (H) x 10.4" (D)
Weight:
6.6 lbs
Brightness:
NP310 - 2200 Lumens
NP410 - 2600 Lumens
NP510 - 3000 Lumens
BTU's:
857 BTU/hour
Focal Length:
19.8mm – 23.7mm
F/#:
1.7 - 2.0
Manual Focus/Manual Zoom
4:3 Screen Formulas:
W = H x 4/3
H = W x 3/4
Screen Diagonal = W x 5/4
NP310/NP410/NP510
Rev 1.1
Page 1 of 6
Advertisement
Table of Contents
Related Manuals for NEC NP310
Summary of Contents for NEC NP310
-
Page 1: Product Description
4:3 Screen Formulas: W = H x 4/3 H = W x 3/4 Screen Diagonal = W x 5/4 NP310/NP410/NP510 NEC Display Solutions of America, Inc. 6.6 lbs NP310 - 2200 Lumens NP410 - 2600 Lumens NP510 - 3000 Lumens 857 BTU/hour 19.8mm –... -
Page 2: Diagrams And Distance Charts
NP310/NP410/NP510 Installation Guide Ceiling Mounted and Desktop Diagrams and Distance Charts The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distances are in inches. For millimeters multiply by 25.4. -
Page 3: Cabinet Dimensions
NEC Display Solutions of America, Inc. NP310/NP410/NP510 Installation Guide Ceiling Mounted and Desktop Rev 1.1 Cabinet Dimensions The following drawings show the cabinet dimensions. Dimensions are in inches. For millimeters multiply by 25.4. Lamp Zoom Lever Lens Center Focus Lever... - Page 4 Cabinet Dimensions (continued) The following drawings show the cabinet dimensions. Dimensions are in inches. For millimeters multiply by 25.4. Exhaust Lens Center www.necdisplay.com NEC Display Solutions of America, Inc. Intake Filter 3 - M4*8 Max for Ceiling Mount Kit NP310/NP410/NP510 Rev 1.1...
- Page 5 NEC Display Solutions of America, Inc. NP310/NP410/NP510 Installation Guide Ceiling Mounted and Desktop Rev 1.1 Optional Ceiling Mount Dimensions (Model #: NP600CM) The following drawings show the ceiling mount dimensions. Dimensions are in inches. For millimeters multiply by 25.4. www.necdisplay.com...
-
Page 6: Input/Output Panel
NOTE 1 : Pins 1, 4, 6, and 9 are used inside the projector. NOTE 2: For long cable runs it is recommended to set communication speed within the projector to 9600 bps. NOTE 3: Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify cable connection.