Table of Contents
Advertisement
Safety
This equipment has been designed and constructed so
that, in so far as is reasonably practical, they meet the
safety requirements of European standard EN 12733
and they will not endanger the health and safety of those
working with them. This is, however, subject to the
machine being properly maintained and used according
to the conditions stated in this Operator's Manual, which
have been found necessary as a result of the research
and testing of the Toro company.
This cutting flail attachment is capable of amputating
hands and feet and throwing objects. Failure to observe
the safety instructions could result in serious injury or
death. For all safety information refer to the traction
unit Operator's Manual.
Sound Power Level
This unit has a guaranteed sound power level of 107
dBA, which includes an Uncertainty Value (K) of 2 dBA.
Sound power level was determined according to the
procedures outlined in EN 12733.
Sound Pressure Level
This unit has a sound pressure level at the operator's
ear of 93 dBA, which includes an Uncertainty Value (K)
of 2 dBA.
Sound pressure level was determined according to the
procedures outlined in EN 12733.
Vibration Level
Measured vibration level for right hand = 3.3 m/s
Measured vibration level for left hand = 3.3 m/s
Uncertainty Value (K) = 1.6 m/s
Measured values were determined according to the
procedures outlined in EN 12096.
2
2
2
Safety and Instructional
Decals
Safety decals and instructions are easily
visible to the operator and are located
near any area of potential danger.
Replace any decal that is damaged or
lost.
1. Height of cut
1. Cutting hazard of hand
2. Cutting hazard of foot
3
320006
40-13–010
Advertisement
Table of Contents
