Table of Contents
Advertisement
Section 5 - Quick VPN
The following instructions explain and help you to configure your D-Link Quick VPN enabled router and devices to create
a Virtual Private Network (VPN). This feature is provided for advanced users who wish to connect remotely and use their
router's Internet connection to add a layer of security while using untrusted networks. Configure the Quick VPN Server on
your router first and then set up client devices to connect through your router's WAN connection.
•
Quick VPN only provides an added layer of security against specific types of snooping attacks and does not guarantee complete data integrity
or protection. Only traffic in the tunnel between your router and device will be encrypted, WAN traffic will leave your D-Link Quick VPN enabled
router unencrypted.
•
Keep your Quick VPN Username, Password, and Passkey safe. Keep your Quick VPN Username, Password, and Passkey safe. It is recommended
that you change these credentials periodically.
•
A device connected via Quick VPN tunnel may experience lower data throughput and higher latency due to a number of factors including:
Internet conditions, local and remote network Wi-Fi and WAN bandwidth limitations, and increased latency. This may negatively impact real
time voice and video communication.
•
Quick VPN supports up to five concurrent VPN client sessions using the same login and password are supported. Quick VPN uses L2TP/IPsec
with MSCHAPv2, PAP, or CHAP authentication.
•
You device may warn you that your information may be intercepted, since you control the Quick VPN server, you may ignore this.
•
UDP Ports 500, 4500, 1701 and IP Port 50 must be open in order for Quick VPN to work.
•
L2TP/IPsec VPN usage may be restricted in some countries and on some networks. If you have trouble using Quick VPN on some networks, but
not others and are not violating network access rules, try contacting your ISP or network administrator.
•
Devices connected via Quick VPN are assigned addresses on a separate subnet (ex. 192.168.1.x). Some network resources may be unavailable
when connecting via Quick VPN.
•
If your Internet connection uses DHCP, it is strongly recommended that you first set up Dynamic DNS (DDNS), such as D-Link DDNS, to eliminate
the need to reconfigure client devices in the event your ISP assigns you a new WAN IP address.
D-Link DIR-X4860 User Manual
Important Information
107
- Quick Links:
- Wireless Modes
Hide quick links:
Advertisement
Table of Contents
