Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electrolux EUC40G1
Summary of Contents for Electrolux EUC40G1
- Page 1 Under counter Dishwasher Instruction manual DOC.NO. PM00483 EDITION:4 01.2021...
-
Page 3: Table Of Contents
Contents General Information ........................1 Introduction ............................. 1 Definitions ............................1 Agreement of Printing ........................1 Identification Data of Machine and Manufacturer ..............2 Equipment Identification ........................ 2 How to Identify Technical Data ....................2 A5.1 How to Understand Manufacturer's Explanations ..............3 A5.2 Copyright ............................ - Page 4 Positioning ............................. 10 Disposal of Packaging Materials ....................11 Connection of Pump Unit ......................11 Pipelines ............................12 E6.1 Installation Drawing ........................12 E6.2 Electric Connection ........................16 Safety Devices ..........................17 Instruction to Control Panel ......................18 Basic Control Key ........................19 Model Setting and Input and Output Wiring Connection ............
- Page 5 Alarm .............................. 33 End of Services and Routine Internal Cleaning ..............33 Correct Use ........................... 33 Machine Disposal ......................... 33 Troubleshooting ..........................35...
- Page 6 Index of Figures and Tables Index of Figures Figure 1 Copy of Identification or Nameplate on Machine ..............2 Figure 2 Position of Marks ........................... 2 Figure 3 Identification of Technical Data ....................3 Figure 4 Example of Document Identification Data .................. 3 Figure 5 Unpacking .............................
- Page 7 Foreword This instruction manual (hereinafter referred to as "the Manual") provides useful information for user's correct and safe operation for the purpose of easy operation of this machine hereinafter referred to as "Machine", "Dishwasher" or "Equipment"). The followings are not considered as the list of long-term and strict warning but are proper instruction for improvement of machine performance.
-
Page 8: A General Information
Customer Manufacturer People purchasing, managing, using Electrolux (Shanghai) Professional Appliance machine, for example, company or entrepreneur Co., Ltd. or its any other authorized assistance Emergency brake and service centers A set of components for emergency braking. It is Qualified operator for normal use of machine... -
Page 9: A4 Identification Data Of Machine And Manufacturer
For a machine with this sign, the g and protection device must only be opened by a qualified operator after switching off the power supply of the machine. Warning! Danger of Damage to Machine. Words and safety alert further warning and explaining types of danger, which are placed near the symbol in the text. -
Page 10: A5.2 How To Understand Manufacturer's Explanations
Revision number each new version replaces and cancels the old versions. UC40 UC40 Document 1) O = Veetsan E = Electrolux Professional Version Month Year (2) UC = Under counter 40 = 40Basket/hour (3)/(5) 1 = 230V/1P 3 = 400V /3P... -
Page 11: A8 Personal Protective Equipment
A9 Keeping Manual Electrolux (Shanghai) Professional Appliance The Manual must be kept with care in the whole Co., Ltd. will bear no responsibility for possible machine lifetime until decommissioning. -
Page 12: B Machine General Information
The special dish rack may be provided with B Machine General Information various accessories for easy and practical B1 Instructions to Machine operation with good washing effect. This dishwasher applies to wash bowl, dish, glass, electronic system may monitor the whole washing mug, tableware, tray;... -
Page 13: C Technical Data
UD-1/UD-1B series OUC1DP OUC1DP6 OUC3DP OUC3DP6 OUC1PG OUC1PG6 OUC3PG OUC3PG6 Veetsan Star VUC1PG VUC1PG6 VUC3PG VUC3PG6 Electrolux EUC40G1 EUC40G16 EUC40GTL EUC40G3 EUC40G36 EUC40GTL Supply Voltage: ——3-Phase 1 380-415V 3P+N 380-415V 3P+N 400V 3P+N ——3-Phase 2 220-240V 3P 220-240V 3P ——Single Phase... -
Page 14: C2 Features Of Power Supply
C2 Features of Power Supply fault component, unless The AC power supply at the machine must meet otherwise that one protective device the following conditions: is provided to disconnect the power • Max. Fluctuation of voltage: ± 10% supply if this is the case.) This •... -
Page 15: D Transport, Loading/Unloading And Storage
D2.1 Handling Procedures D Transport, Loading/Unloading For correct and safe lifting operation: • Use equipment type with suitable features and Storage and capacity (e.g. electric pallet truck or D1 Introduction forklift); Special equipment with sufficient capacity must • Cover sharp edges; be used for transportation (the machine is moved •... - Page 16 moisture. The Machine storage area must have a flat support surface to avoid machine distortion or damage to support leg. Important Information! The machine must be positioned, installed dismantled professional technicians! Important Information! Don't modify components supplied with machine. Any missing or defective components must be replaced with genuine ones.
-
Page 17: E Assembly And Installation
must be arranged on the floor for machine water E Assembly and Installation drainage (see E6.2 "Installation Drawing". It is Important Information! possible to use a single sump with flow rate of 3 For install the machine, one must L/s at least. wear the proper personal protective equipment (safety shoes, gloves, E3 Machine Space Restriction... -
Page 18: E5 Disposal Of Packaging Materials
Polypropylene: Top packaging plate, tie-down straps Foaming polystyrene: Protective plate of edges and corners Figure 6 Positioning Machine The wooden materials and cardboards must be disposed of in line with regulations of the country where the machine is installed. E6 Connection of Pump Unit Important Information! The watermark label machine must be Figure 7 Unwrapping Packaging Film... -
Page 19: E6.1 Pipelines
E6.2 "Installation Drawing")to the manifold drain E6.2 Installation Drawing pipe. Install the trap or place the drain pipe into The following installation drawing shows the the S-shaped trap on the floor. outlined machine dimensions and connection to water and electricity. E6.1 Pipelines Important Information! -
Page 23: E7 Electric Connection
Power supply 380-415V 3P+N E7 Electric Connection (Standard) The electrical connection must follow the regulations of the country where the machine is installed. Important Information! The work on the electrical system must only performed qualified electrician. ⚫ Ensure that the power supply voltage (Table 1) indicated on the nameplate conforms to the grid voltage. -
Page 24: E8 Safety Devices
“L1,L2,L3 ” to the residual leakage circuit-breaker E8 Safety Devices (G) which should be supplied by the customer. • automatically resettable thermal Connect the PE to the customer's grounding protective device that is incorporated into the terminal. winding of the electric pump may cut off the power supply in case of fault. -
Page 25: F Instruction To Control Panel
F Instruction to Control Panel Table 2 Control Panel Key: 1=Indicator light of washing cycle 1 6=Start/pause key 2=Indicator light of washing cycle 2 7=DOWN/drainage key 3=Indicator light of washing cycle 3 8=Start/function key 4=Temperature display of main washing 9=Key of mains switch 5=Temperature display of rinsing 10=UP key Important Information! -
Page 26: F1 Basic Control Key
F1 Basic Control Key Function key "Power" key The setting key is located immediately under the Press the right power supply switch and the power supply switch. When the computer is indicator light of power supply is ON, indicating energized but not started, the parameters of the that the machine is switched on. -
Page 27: F2 Model Setting And Input And Output Wiring Connection
Input/output on SR-5001K board: F2 Model Setting and Input and Output 3.1. X5 plug block: Wiring Connection AC12V: Power supply input of SR-5001 Model setting: Set the toggle switch position series computer board (AC power supply input is on the SR-5001K board. available: AC12V±... -
Page 28: F3 Parameters Setting By Energization After Correct Connection
F3 Parameters Setting by Energization after Correct Connection The parameters may be set after energization, in OFF state, and when the unit's decimal point of the PV window is flickering: Press the "Set” key to enter into the setting state. The main washing temperature display window shows “PA-”, indicating entry of password. - Page 29 Press the "Set" key, the main washing temperature display window shows “P8-”, indicating the water drainage delay time setting. The rinsing temperature display window shows the original setpoint. Press the numerical digit UP or DOWN key to modify the water supplying delay time setpoint.
-
Page 30: F4 Instructions To Display And Operation
F4 Instructions to Display and Operation Selection of washing cycle time: Selection is Power on initialization: made in standby state. After energization, it performs self-checking of Press the function key to select the washing cycle display and all the digital tubes are ON for 4 s and time. - Page 31 window shows " 041 " . If the rinsing heating is faulty, the main washing temperature display window shows "Er-". rinsing temperature display window shows " 011 " . Faulty communication: 3.1. If the initialized communication is faulty, the main washing temperature display window shows "Er-".
-
Page 32: G Start
G Start G1 Preliminary Check, Adjustment Operation Test Important Information! These operations must be made by professional technician with personnel protective equipment (safety shoes, gloves, glasses, etc.), Figure 13 Filter, Overflowing Pipe and Washing Arm tools and proper auxiliary equipment. G1.1 Checking Electrical and Pipelines Before start:... -
Page 33: Figure 15 Connection To Automatic Detergent And Quick-Dry Agent Distributors
maintained after the machine has not been used for a long time. Power Supply Connection Detergent Distributor and Rinse Aid Distributor The circuit board is provided with 220-240V/2A 1. Dishwasher without built-in detergent power supply terminal for external distributor. distributor (optional or configured by user) (Figure 15) The user may use optional dosing distributor with automatic detergent distribution (Figure 15). -
Page 34: H General Safety Rules
H1.2 Safety Signs Displayed on Machine or H General Safety Rules Near Working Area H1 Introduction Designation The machine is equipped with electrical and/or Don't grease, lubricate, maintain and adjust the mechanical safety device protecting operator and moving parts. machine itself. Therefore, the user must not Don't remove the safety remove or modify these devices. -
Page 35: H4 Foreseeable Improper Use
Don't perform any check, cleaning, repair or disconnecting the circuit breaker before maintenance on the moving parts. adjustment, cleaning, resetting Notify the workers of precautions in legible signs. maintenance; • In order to ensure the efficiency and correct The power supply cannot be switched off by operation of the machine, regular maintenance disconnecting the circuit breaker at the end must be performed according to this manual. -
Page 36: Table 3 Other Dangers
During installation, there will be sufficient space to restrict these dangers. Application Stages: To fulfill these conditions, the areas and passages Table 3 Other Dangers around the machine must: Potential Explain of hazards • have no obstacle (e.g. ladder, tool, container, risks box, etc.);... -
Page 37: I Intended Use Of Machine
in place and the equipment door is closed. Intended Use of Machine • Open the water supply valve; Correct Use • Switch on the circuit breaker "G" (refer to This equipment is specially designed and "E7"); improved to achieve excellent performance and •... -
Page 38: I6 Operation
If the boiler water does not reach minimum temperature needed, the washing time will be extended. Washing Cycles Available: - Washing Cycle 1 Operation Suitable for washing glasses, tableware made of The machine has been finished heating and filling glass. if the indicator light of operating condition is ON in green. - Page 39 with clean dishes. The coked food attached on the dishes cannot be removed. The dishes attached with coked - Scale removal food shall mechanically/chemically Remove the scale with special scale remover. It is removed (for example, pre-washing using tap recommended following the table for operation: water) before they are placed into the It is recommended following the table for cycle dishwasher.
- Page 40 chopsticks, etc. Wash the stainless steel surface with warm soapy water. Never use progressive detergent or steel scraper, common steel wire wool, brush or scraping straightedge. Wipe to dry using warm cloth after wetting. Alarm Use soft wet cloth and neutral detergent (if Message signal will be sent in case of general necessary) to clean the control panel.
- Page 41 applicable regulations of the country where the machine is installed. All the metallic parts are made of stainless steel (AISI 304) and removable. The plastic parts are attached with material symbol and designation. The symbols on the product represent that the Equipment cannot be disposed of like household waste and that it shall be disposed of to prevent adverse influence on the environment and human...
- Page 42 I11 Troubleshooting 4、 If foamed detergent is used, drain the water tank and Dishwasher unable to be energized filled with water until the foam is disappeared. 1、 Ensure that the outlet socket is live; Stain or spot on the glass 2、...
- Page 47 Made in China -- 2688, West Huancheng Road, Fengxian District, Shanghai, China Electrolux (Shanghai) Professional Appliance Co., Ltd. The Manufacturer reserves the right to modify the appliances presented in this publication without notice.