Headlight Switch - Toro Multi-Pro 5800 Installation Instructions Manual
Road light and homologation kit turf sprayer
Hide thumbs
Also See for Multi-Pro 5800:
- Installation instructions manual (21 pages) ,
- Installation instructions (4 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
6. Assemble the horn switch to dash panel with the
knurled nut (5/8 inch), and tighten the nut by
hand
(Figure
27).
1. Horn switch
2. Knurled nut (5/8 inch)
7. Thread the button onto the threads of the horn
switch
(Figure
27).
Replacing the Light Switch
1. Remove the light switch from dash panel
28).
1. 8-socket connector
(
)
HEADLIGHT SWITCH
Figure 27
3. Button
Figure 28
2. Light switch
2. Remove the 8-socket connector labeled
HEADLIGHT SWITCH
(Figure
Note:
3. Align the socket terminal at the end of the 108
cm (42-1/2 inches) branch of the kit wire harness
labeled
of the 8-socket connector for the headlight
switch
g208260
1. Terminal (
(Figure
4. Insert the terminal into socket 1 of the 8-socket
connector for the headlight switch as shown in
Figure
g208264
1. Terminal (
SWITCH PIN
5. Plug the rocker switch from the kit into the
8-socket connector for the headlight switch
(Figure
12
from the headlight switch
28).
Discard the headlight switch.
TO HEAD LIGHT SWITCH PIN
(Figure
29).
Figure 29
1)
TO HEAD LIGHT SWITCH PIN
30.
Figure 30
2. 8-socket connector
TO HEAD LIGHT
1)
(
HEADLIGHT SWITCH
31).
1 to the back
g208275
g208276
)
Advertisement
Table of Contents
