ThinkSystem SR630
Quick Start
In the box
Server
Rail kit*
Cable management arm*
Material box, including items such as accessory kit, power cords*
and documentation
Note: Items marked with asterisk (*) are available on some models
only.
If any item is missing or damaged, contact your place of purchase.
Ensure that you retain your proof of purchase. They might be required
to receive warranty service.
First glance
Front view:
Note: Your server might look different from the following illustrations.
Figure 1. Server models with four 3.5-inch drive bays
Figure 2. Server models with eight 2.5-inch drive bays
Figure 3. Server models with ten 2.5-inch drive bays
VGA connector (available
on some models)
XClarity Controller USB
connector
Power button with power
status LED
System ID button with ID
LED
Rack latch (right)
Drive status LED (yellow)
Rack latch (left)
Rear view:
Figure 4. Server models with three PCIe slots
Figure 5. Server models with two PCIe slots
Figure 6. Server models with two hot-swap drive bays and one PCIe
slot
PCIe slot 1 on riser 1
assembly
PCIe slot 3 on riser 2
assembly
Power supply 1
NMI button
VGA connector
Ethernet connectors on the
LOM adapter (available on some
models)
Note: For server models with two hot-swap drive bays in the rear, if the
server is installed in a rack and shipped to you, the server comes with
a shipping bracket installed. Before turning on the server, be sure to
remove the shipping bracket. For server models with two hot-swap
drive bays in the rear, if the server is installed in a rack for shipping, be
sure to install the shipping bracket. For details, refer to the
ThinkSystem SR630 Maintenance Manual, which is available at:
http://thinksystem.lenovofiles.com/help/topic/7X01/pdf_files.html
Pull-out information tab
USB 3.0 connector
Network activity LED
System error LED
Hot-swap drive bays
Drive activity LED (green)
PCIe slot 2 on riser 1
assembly
Rear 2.5-inch drive bays
Power supply 2 (available on
some models)
USB 3.0 connectors
XClarity Controller network
connector