Download Print this page

Choosing The Wireless Ip Settings - Cisco WIP310 User Manual

Wireless-g ip phone

Hide thumbs Also See for WIP310:

Table of Contents

Installing the WIP310

Accessing the Wireless Network

STEP 1

STEP 2

STEP 3

NOTE

Cisco WIP310 User Guide

To switch to a different wireless profile, you need to manually choose it from the

list in your phone:

In the Home screen, press the Select button to display the Settings menu. Press

the Select button again and navigate to the

Press the Select button to view your options. Select Manual Setup to show the list

of configured wireless networks.

Use the Up or Down Arrow key to choose the network you want from the list and

press the Select button.

The phone displays a message if it successfully connects to the wireless network.

Choosing the Wireless IP Settings

By default, your WIP310 phone uses Dynamic Host Configuration Protocol (DHCP).

With DHCP, the router assigns an IP address to your phone. This IP address

assignment is dynamic, meaning that the IP address assigned to your phone can

change.

You can configure the phone with a static, or unchanging IP address.

You should only configure your WIP310 to use a static IP address if you have been

instructed to do so by your ITSP or by another support person.

Wireless Setup

menu.

Table of Contents